• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.368-373
• /
• 2003

This experiment was conducted to examine the effects on the composition and rumen degradation in sacco of rice straw treated with animal urine (1 l of 2.9 g N/kg DM straw) and urea plus calcium hydroxide (2% urea plus 0.5% $Ca(OH)_2$/kg DM straw) as a cheap and relatively safe alternative for ammonia (3% ammonia solution/kg DM straw). Mold occurred in urine treated straw, but other treatments were apparently mold-free. All treatments significantly (p<0.05) increased CP content in the straw compared with untreated one. Ammonia-treated straw contained CP at about twice that in urine or urea-calcium hydroxide treated straw. NDF and hemicellulose contents decreased significantly (p<0.05) in all treatments, while ADF and cellulose showed no differences compared with untreated straw. The degradable fraction of DM, CP, NDF, hemicellulose and cellulose was significantly (p<0.05) increased for ammonia and urea-calcium hydroxide treatments than for urine treated or untreated straw except for CP of urine treated straw. Chemical treatment of rice straw increased the readily degradable fraction of CP, while it decreased the slowly degradable fraction for urine or urea-calcium hydroxide treated rice straw. The degradation rate of hemicellulose was significantly (p<0.05) increased for ammonia and urea-calcium hydroxide treatments compared to urine treated or untreated straw. However, no effect on cellulose degradation rate was found by any of the treatments. There was no improvement in the degradation kinetics caused by the urine treatment despite the improvement of the chemical composition. Although the improvement in rumen degradability was less in the urea-calcium hydroxide treatment than in the ammonia treatment, its use may be more desirable because it is less expensive to obtain, less hazardous nature, and readily available. For further improvement it is necessary to investigate the supplementation of slowly degradable nitrogen to ureacalcium hydroxide treated rice straw diet.

• Journal of Environmental Health Sciences
• /
• v.31 no.4 s.85
• /
• pp.332-339
• /
• 2005

The environmental regulations in the world has been reinforced and many nations has devoted themselves to the development of cost-effective technology. Selective catalyst reduction(SCR) and selective non-catalyst reduction (SNCR) processes are mainly used to treat nitrogen oxidants generated from fossil-fuel combustion. One of these typical technologies for reduction of do-NOx is SNCR process has increased continuously because of the low cost for building and maintenance. Nevertheless the researches on the application to real scale plant by the reductant like Urea are rarely studied. In this paper, an experimental investigations were performed on the SNCR process in the industrial waste incineration plant. With no reducing agent, the concentration of NOx stayed in around 180 ppm $(O_2\;12\%)$ with the exhausting temperature of $950^{\circ}C$ and changed within the range of 20 ppm to remain relatively consistent. When $10\;wt\%)$ of a solution was added, the efficiency of denitrification reached above $61.4\%$ with the NSR of 2.0 and the exhausting temperature of $950^{\circ}C.$ When the concentration of the urea solution was set to $10\;wt\%$ and the sprinkling to four nozzles, the reaction temperature was reduced to about $50~100^{\circ}C$ with a mixture of $10\;wt\%\;CH_3OH\;and\;5wt\%\;Na_2CO_3$ in $40\;wt\%$ of the solution. The NOx removal efficiency increased to $78.4\%,$ achieving a broader and expansive range of reaction temperatures than the addition of an unmixed pure solution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.2
• /
• pp.29-36
• /
• 1979

In order to control free formaldehyde release from fabric finished with urea-formaldehyde precondensate, the resin finished fabric was padded in urea or acylamide solution, dried and cured at $140^{\circ}C$. The effect of aftertreatment with urea or acrylamide on free formaldehyde release and on characteristics of resin finished fabric were examined. It was shown that aftertreatment with urea was effective to control free formaldehyde release, the free formaldelyde content in aftertreated fabric could be reduced from 900 ppm to 200 ppm and formaldehyde release under accelerated storage condition was also reduced from 8000 ppm to 1000 ppm. Polyacrylamide formed in the fiber during aftertreatment appeared to be a formaldehyde capture. Especially by washing the aftertreated fabric, the ability to control formaldehyde release under accelerated condition was not dimimished in contrast with aftertreated with unea. It suggests that polyacrylamide can be used as a formaldehyde capture which withstand diminution from washing.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.657-661
• /
• 1994

A method to analyse the concentration of mixture (AC/urea) and the concentration of urea or AC alone was developed. In this study, the decomposition of AC solution to ammonium bicarbonate was suppressed by using of 15% w/v ammonia as a solvent and the error of equilibrium point was maintained less than 1 %. Strong peaks at $1600cm^{-1}$ for urea and at $1405cm^{-1}$ for AC, corresponding to the N-H bending and symmetric carboxylate ion stretch were used to construct calibration graph and equations for the measurement of concentration. The errors of calculated concentration were ${\pm}0.1%$ w/v for AC and ${\pm}0.3%$ w/v for urea.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1499-1502
• /
• 2004

An amperometric biosensor based on carbon paste electrodes (CPEs) for the determination of urea was constructed by enzyme (urease/GL-DH)-modified method. Urea was hydrolyzed to ${NH_4}^+$ by catalyzing urease onto the enzyme-modified electrode surface in sample solution. In the presence of ${\alpha}$-ketoglutarate and reduced nicotinamide adenine dinucleotide(NADH), a liberated ${NH_4}^+$ produce to L-glutamate and $NAD^+$ by Lglutamate dehydrogenase (GL-DH). After the chemical reaction was proceeded, the electrochemical reaction was occurred that an excess of the NADH was oxidized to $NAD^+$. The oxidation current of NADH was monitored at +1.10 volt vs. Ag/AgCl. An optimum conditions of biosensor were investigated: The optimum pH range for catalyzed hydrolysis reaction of urea was pH 7.0-7.4. The linear response range and detection limit were $2.0\;{\times}\;10^{-5}{\sim}2.0\;{\times}\;10^{-4}M\;and\;5.0\;{\times}\;10^{-6}M$, respectively. Another physiological species did not interfere, except L-ascorbic acid.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.7-16
• /
• 1996

${CO_3}^{2-}$ containing whisker-like hydroxyapatite powders were synthesized byhomogeneous precipitation method using urea, Dicalcium phosphate anhdrate[DCPA; $CaHPO_4$] and octacalcium phosphate [OCP; $Ca_8H_2(PO_4_)6\cdot5H_20$]were obtained as precursors and they transformed to high crystalline hydroxyapatites at pH 5.62, and 6.54 respectively. According to the condition of the final pH in the solutions for the solution products and urea contents OCP was remained. When the solution product of $Ca^{2-}$ and ${PO_4}^{3-}$ was $1.5\times 10^4$[$mM^2$] and the content of urea was 0.25 mol.$dm^{-3}$ well crystallized whisker-like hydroxyapatite tens of micrometer in length was obtained. By heat treatment DCPA and OCP were decomposed into $\beta$-tricalcium phosphate [$\beta$-TCP ; $\beta$-$Ca_3{PO_4}_2$] and $\beta$-dicalcium phosphate [$\beta$-DCP ;$\beta$-$Ca_2P_2O_4}_2$]. And well-crystallized hydroxyapatite was partially decomposed into $\beta$-TCP at $800^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.374-379
• /
• 1976

Apparent molal volumes of urea, 1,3-dimethylurea (DMU), and 1,1,3,3-tetramethylurea(TMU) in dimethylsulfoxide(DMSO) and in methanol have been measured at low concentration by the density measurements at $25^{\circ}C$. It is confirmed that urea molecules in the dilute DMSO solution self-associate to a greater extent than in the concentrated solution, while DMU and TMU molecules in DMSO solutions interact with the solvent molecules. In addition, the molecules of the three solutes also interact predominatingly with methanol molecules.

• Journal of Pharmaceutical Investigation
• /
• v.6 no.2
• /
• pp.83-87
• /
• 1976

Microanalysis of rodenticide by visible absorption method was attempted. The following procedure was found to be very simple and to give accurate results. RH-28787 was added to dimethylformamide (DMF), and extracted after stirring for about 20 minutes in extractor $(30^{\circ}C)$. After extraction, the absorbance of DMF solution, was measured at 346 nm by using spectrophotometer. The result agrees closely with the experimentally determined value by means of the gas chromatograph.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3031-3033
• /
• 2009

A new colorimetric anion sensor 1 has been synthesized based on both Fat brown RR dye and a nitrophenyl group. This new receptor 1 could recognize the presence of fluoride ion effectively and selectively by the change of color of solution. In addition, receptor 1 shows higher affinity for acetate, dihydrogenphosphate, and hydrogensulfate than the other anions such as chloride, bromide, iodide, perchlorate, and nitrate in acetonitrile.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1017-1026
• /
• 2014

A multi-perforated tube is generally installed between the muffler inlet and in front of selective catalytic reduction (SCR) catalysts in the integrated urea-SCR muffler system in order to disperse the urea-water solution spray uniformly and to make better use of the SCR catalyst, which would result in an increase nitrogen oxide ($NO_x$) reduction efficiency and a decrease in the ammonia slip. The effects of the multi-perforated tube orifice area ratios on the internal flow characteristics were investigated analytically by using a general-purpose commercial software package. From the results, it was clarified that the multi-perforated tube geometry sensitively affected the generation of the bulk swirling motion inside the plenum chamber set in front of the SCR catalyst and to the uniformity index of the velocity distribution produced at the inlet of the catalyst. To verify the analytical results, engine tests were carried out in the ESC and ETC modes. Results of these tests indicated that the larger flow model in the longitudinal direction showed the highest NOx reduction efficiency, which was a good agreement with the analytical results.