• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1161-1167
• /
• 2015

A slender guideway is essential in improving aesthetically and reducing its construction cost which accounts for about 70% of overall investment for maglev system. As the slender guideway, however, may increase its deformation, its effect on levitation stability and guidance performance needs to be analyzed. The purpose of this study is to analyze the effect on guidance characteristics of maglev due to the lateral deformation of the guideway girder and lateral irregularity of guiderail. For doing this, 3D model considering lateral deformation of girder and irregularity of rail of the guideway is developed. Using the dynamic interaction model integrated with the proposed guideway and maglev vehicle including electromagnetics and its controller, guidance characteristics of maglev are analyzed. It is analyzed that the effect on lateral deformation of girder is relatively small compared to deformation on the lateral irregularities of guiderail.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.94-104
• /
• 2015

Trams are rail vehicles that run on tracks along public, urban streets; they also sometimes run on separate rights of way. Tram vehicles run more efficiently and their overall operating costs are lower than those of similar vehicles. In general, trams provide a higher capacity service than buses. However, when tram stops in the middle of the road do not have pedestrian refuges, trams can cause speed reductions for other transport modes (buses, cars), as in such configurations other traffic cannot pass whilst passengers are alighting from or boarding the tram. In this study we examined the qualifications of overseas tram operation. The Railway Safety Act, sub-laws, and other relevant laws were examined to determine complementary measures.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1454-1460
• /
• 2006

This paper assesses communication performance using a roaming simulator when roaming occurs between onboard and ground wireless communication devices for communication based train control system (CBTC). Generally, CBTC is defined as the system regularly collecting location and speed data from each train, transmitting distance information to a train, and optimizing train speed according to train performance. When a train is moving, roaming is also performed to continuously transmit and receive train control information between the ground controller and the train. To operate CBTC, packet loss rate should be less than 1%, roaming time less than 100ms during roaming. We developed a roaming simulator to check communication performance before installing ground and onboard equipments on actual wireless sections. The roaming simulator to be introduced in this paper is for roaming simulation before conducting CBTC field test, which is the project to develop Urban Rail Signaling System Standards, being conducted in KRRI. The simulation consists of one onboard wireless communication device and three ground wireless communication devices, and the roaming simulator estimate packet loss rate occurring during roaming process of the two devices. Therefore, if you use the roaming simulator before the field test, you can predict various problems to occur in actual environment and reduce time, cost and people necessary to resolve these problems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3858-3874
• /
• 2021

As an essential part of the urban transportation system, precise perception of the traffic flow parameters at the traffic signal intersection ensures traffic safety and fully improves the intersection's capacity. Traditional detection methods of road traffic flow parameter can be divided into the micro and the macro. The microscopic detection methods include geomagnetic induction coil technology, aerial detection technology based on the unmanned aerial vehicles (UAV) and camera video detection technology based on the fixed scene. The macroscopic detection methods include floating car data analysis technology. All the above methods have their advantages and disadvantages. Recently, indoor location methods based on wireless signals have attracted wide attention due to their applicability and low cost. This paper extends the wireless signal indoor location method to the outdoor intersection scene for traffic flow parameter estimation. In this paper, the detection scene is constructed at the intersection based on the received signal strength indication (RSSI) ranging technology extracted from the wireless signal. We extracted the RSSI data from the wireless signals sent to the road side unit (RSU) by the vehicle nodes, calibrated the RSSI ranging model, and finally obtained the traffic flow parameters of the intersection entrance road. We measured the average speed of traffic flow through multiple simulation experiments, the trajectory of traffic flow, and the spatiotemporal map at a single intersection inlet. Finally, we obtained the queue length of the inlet lane at the intersection. The simulation results of the experiment show that the RSSI ranging positioning method based on wireless signals can accurately estimate the traffic flow parameters at the intersection, which also provides a foundation for accurately estimating the traffic flow state in the future era of the Internet of Vehicles.

• Explosives and Blasting
• /
• v.40 no.1
• /
• pp.29-38
• /
• 2022

Electronic detonators are now widely used in various construction sites and quarry mines. Including the sites where safety-thing is located nearby, Cases of using electronic detonators are increasing to maximize operational efficiency by improving blast fragmentation or reducing the cost of secondary blasting. This case study is about applying for electronic detonators on zone 00 construction site, which is the part of urban area metropolitan express rail A line project. Although the project was initially planned to utilize non-electric detonators, Electronic detonators are considered as the solution not only for safe and fast excavation, but also to minimize civil complaint and the damage of safety-thing. By applying electronic detonators, we were able to satisfy environmental regulations standards and prevent nearby safety-thing from getting damaged.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.801-807
• /
• 2008

This study attempts to evaluate and compare the land consumption efficiencies of various urban transport modes, utilizing the time-area method. With the careful considerations of travel conditions and modal characteristics, equations for the computation of time-area for various different modes are derived. With the appropriate assumed values of parameters, time-area consumptions per person per km for each mode both for peak and off-peak situations are computed and evaluated. The relationships between the time-area consumed and operating speed for each mode are graphically demonstrated and discussed. An example of the time-area consumed for a hypothetical commuter round-trip using various modes are also presented in order to clearly show the consumption of parking requirements by specific modes. It shows that regardless of facilities used, auto users are by far the worst in terms of area efficiency and that transit, especially rail rapid transit, is a superior mode. Pedestrian and bicycle, though consuming more than expected, also demonstrate the advantage in case of a short-distance trip in terms of area efficiency compared with the bus transit modes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.147-159
• /
• 2014

Public transportation ridership and walkability of urban district can be enhanced through high quality of TOD(Transit Oriented Development) elements. Generally, TOD have been evaluated several physical components such as the diversity of land use pattern, accessibility of public transportation and aspects of urban design around the station area. Especially, Spatial characteristics of TOD planning elements have many potential dependent when considering the characteristics of Rail Station-Influenced Area Development which is performing around subway station. Therefore, researchers should be considering the variation of spatial properties for planning elements according the set of spatial area and their socioeconomic factors. However, existing many cases related TOD does not consider about this point. In this paper, the changes of TOD characteristics were analyzed by different spatial units surrounding subway station in Busan Metropolitan City. Multiple Regression Analysis was performed for an investigation of effective spatial unit of TOD planning elements in this area using subway ridership data. In addition, the application validity of socioeconomic variables was examined through a comparative analysis of regression results with the multiple regression that implied only physical TOD elements. As the result, the variation of spatial properties for TOD planning elements according to the set of spatial unit was found. Furthermore, the specific spatial unit to applicable TOD elements in this area was derived. And the multiple regression model which added socioeconomic variables was derived more improved estimate results than the multiple regression model that implied only physical TOD elements.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.851-860
• /
• 2015

Transport Social Overhead Capital refers to public utilities necessary for a nation's basic economic activities, and is divided into roads, railway, subway, ports and so on. It is important to be able to provide these SOC in the right place at the right time to enhance productivity and competitiveness of a nation. In this study, correlation and factor analysis on countries' socioeconomic and transport indicators were performed in order to understand the need for expansion of SOCs including railway, and to identify the impact they have on national competitiveness(productivity). As a result, GDP showed high correlativity(0.59~0.99) with factors such as population, land area, extension of available railroad, and road extension. Specifically, through the analysis of Russia's urban transport system and comparison between socioeconomic indices and SOCs of OECD countries, it was examined that how increasing transport infrastructure investments could enhance national competitiveness. In conclusion, opening new Light Rail greatly affects the growth of GDP followed by the increasing extension of available railroad. Furthermore, if available railroad extension is increased by 10 % from 2014, assuming high speed tram is opened, GDP will likely increase by 21.6%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.33-43
• /
• 2016

Public transportation card data, which is collected for purposes of the Integrated Public Transportation Fare System, provides neither transfer time nor transfer frequency occurring on the metropolitan city-rail (MCR). And because there are no transfer toll gates installed on the MCR, data on transfers between lines are estimated through means such as elicitations using survey questionnaire, or otherwise through macroscopic observations, which poses the risk of transfer time and frequencies being underestimated. For the accurate estimation thereof, an explanation of the transit path that arises between the Entry-and Exit-Gates must be provided. The purpose of this research is twofold : 1) to build a transit path model to reflect the current state of transfer movements on the basis of transportation card reader data, and 2) to deduce information on transfers occurring in the greater metropolis. To achieve these aims, the idea of Big Nodes is introduced in the model to align transportation card reader operation system characteristics with those of the MCR network. The link-label method is applied in the model as well to make certain that the MCR network runs in an effective manner. Administrative information obtained by the transportation card reader is used to derive transfer time and frequency both in the city's mid-zones, and in the Seoul-Gyeonggi-Incheon district's large-zones. Public transportation card data from a single specific day in year 2014 is employed in the building of the quantified transfer specific data. Extended usage thereof as providing comprehensive data of transfer resistance on the MCR is also examined.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.685-697
• /
• 2019

The study aimed to analyze the structure of China's passenger railway network in the years of 2008, 2013, and 2018, respectively. At the same time, it tried to investigate its derivative impact on the patterns of Chinese urban network. The analytical tool was based on the NetMiner4.0. In order to measure network characteristics of China's passenger railway network, it primarily focused on the degree centrality, betweenness centrality, and closeness centrality. First of all, the higher degree centralities, with a few exceptions, were observed in BeiJing, ShangHai, GuangZhou, WuHan, XiAn, ChengDu, HaErBin, and ShenYang over a decade. In contrast, the higher betweenness centralities were recorded in cities of higher development potential including WuLuMuQi, GuiYang, ShenYang, and KunMing. The closeness centrality analyses confirmed the fact that most metropoles like BeiJing, ShangHai, and GuangZhou kept the highest train accessibility during the same research period. At the same time, the opening up of a new stretch of high speed railway network has consecutively strengthened connectivity between BeiJing and TianJin. Owing to unprecedented development of railway traffic and its extensive operations, this study believes that Chinese major cities, without interruption, would pursue a series of urban policy alternatives geared towards railway stations-oriented networking and competitively try to extend their network ranges.