• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.163-173
• /
• 2012

PURPOSES : The purpose of this study is to check the possibilities of traffic pattern analysis using MatSIM for urban road network operation in incident case. METHODS : One of the stochastic dynamic models is MatSIM. MatSIM is a transportation simulation tool based on stochastic dynamic model and activity based model. It is an open source software developed by IVT, ETH zurich, Switzerland. In MatSIM, various scenario comparison analyses are possible and analyses results are expressed using the visualizer which shows individual vehicle movements and traffic patterns. In this study, trip distribution in 24-hour, traffic volume, and travel speed using MatSIM are similar to those of measured values. Therefore, results of MatSIM are reasonable comparing with measured values. Traffic patterns are changed according to incident from change of individual behavior. RESULTS : The simulation results and the actual measured values are similar. The simulation results show reasonable ranges which can be used for traffic pattern analysis. CONCLUSIONS : The change of traffic pattern including trip distribution, traffic volumes and speeds according to various incident scenarios can be used for traffic control policy decision to provide effective operation of urban road network.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.2
• /
• pp.43-50
• /
• 2014

The Centralized Traffic Control(CTC) System of Urban Railway is an element(subsystem) of the Urban Railway system to aim safety operation and efficient management of rolling stock in accordance with a train scheduling program in train operation ways. That's why the CTC System must be developed considering systematic and safety-guaranteed methods such as RAMS(Reliability, Availability, Maintainability, and Safety) refereed to IEC standards. The CTC System is consists of rolling stock, signaling, power supply, communication, and mechanical equipment and preforms control and remote monitoring functions. The technical activities considering safety process are very important at such an early stage of development in a railway project. This paper introduces RAMS activities and an independent safety assessment by $3^{rd}$ Party focused on a safety applied to a development of the CTC system of Urban Railway and proposes the experiences as well practices.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.30-44
• /
• 2013

Traffic congestion has become a serious problem with the recent exponential increase in the number of vehicles. In urban areas, almost all traffic congestion occurs at intersections. One of the ways to solve this problem is road expansion, but it is difficult to realize in urban areas because of the high cost and long construction period. In such cases, traffic signal control is a reasonable method for reducing traffic jams. In an actual situation, the traffic flow changes randomly and its randomness makes the control of traffic signals difficult. A prediction of traffic jams is, therefore, necessary and effective for reducing traffic jams. In addition, an autonomous distributed (stand-alone) point control of each traffic light individually is better than the wide and/or line control of traffic lights from the perspective of real-time control. This paper describes a stochastic optimum control of crossroads and multi-way traffic signals. First, a stochastic model of traffic flows and traffic jams is constructed by using a Bayesian network. Secondly, the probabilistic distributions of the traffic flows are estimated by using a cellular automaton, and then the probabilistic distributions of traffic jams are predicted. Thirdly, optimum traffic signals of crossroads and multi-way intersection are searched by using a modified particle swarm optimization algorithm to realize real-time traffic control. Finally, simulations are carried out to confirm the effectiveness of the real-time stochastic optimum control of traffic signals.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.4
• /
• pp.348-356
• /
• 2014

To understand the relationship between road-traffic noise and urban components such as population, building, road-traffic and land-use, the city of Cheongju that already has road-traffic noise maps of daytime and nighttime was selected for this study. The whole area of the city is divided into square cells of a uniform size and for each cell, the urban components are estimated. A spatial representative noise level for each cell is determined by averaging out population-weighted facade noise levels for noise exposure population within the cell during nighttime. The relationship between the representative noise level and the urban components is statistically modeled at the cell level. Specially, we introduce a spatial auto regressive model and a spatial error model that turns out to explain above 85 % of the noise level. These findings and modeling methods can be used as a preliminary tool for environmental planning and urban design in modern cities in consideration of noise exposure.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.4
• /
• pp.97-110
• /
• 2020

This study conducted observations at 72 traffic lights and road signs in Sejong-si, Korea from March to June 2019 in order to analyze nest-site, nest-site characteristics and feeding behavior in Tree sparrow (Passeer montanus) in urban. Feeding behavior during breeding season in 2019 was investigated at 10 Town representing traffic facilities installed on the road located in the center of the city and 10 Riverside Geumgang river's riverside road. We fitted both general linear model and regression model to our field data and estimated the spatial variation of initial date of the first feeding (i.e., being date of breeding) and the total number of caterpillar fed by parents per hour. Our results showed that the frequency of nest building on artificial structures, such as traffic lights, was about 26% higher and about 8 days earlier in the riverside. In particular, the first feeding was significantly faster when the nearest distance between nest to green field as foraging site was shorter whereas there was no significant effect of the number of nest within 50 meters on the first feeding. Number of caterpillars fed by parents was higher in the Riverside than in the Urban, and especially the number in the second brood was sharply decreased in the Urban. As we estimated average amount of caterpillars per hour to 446 traffic safety facilities in Sejong-si, it was estimated that Tree sparrows fed 18,742.8 caterpillars per hour during the breeding season. In this study, we showed that characteristics of nests built in artificial structures and feeding behavior in order to analyze effects of environmental condition in urban on life-history traits during the breeding season. Finally, we discussed the conservation of birds in urban and pest control effects.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.9-13
• /
• 1993

This paper describes the impact of reflected sound in tunnel. The impact of reflected sound is obtained from making a comparision between measurements of tunnel and bridge. Sound level of tunnel is higher than that of bridge because reflected sound is generated in tunnel. Road traffic noise cannot be freely propagated because there are many buildings in urban. Therefore, a tunnel effect is generated in urban road. The impact of reflected sound is generated not only in tunnel, but also in urban road. This study provides the basic data for tunneling work and noise control strategy in urban road.

• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.67-74
• /
• 2018

PURPOSES : The goal of this study is the development of roundabout accident models for urban and non-urban areas. METHODS : This study performed a comparative analysis of the regional factors affecting accidents. Traffic accident data were collected for the period 2010~2014 from the TAAS data set of the Road Traffic Authority. To develop the roundabout accident models, the Poisson and negative binomial regression models were used. A total of 25 explanatory variables such as geometry, and traffic volume were used. RESULTS : The key findings are as follows: First, it was found that the null hypotheses that the number of accidents is the same should be rejected. Second, three Poisson regression accident models, which are statistically significant (${\rho}^2$ of 0.154 and 0.385) were developed. Third, it was noted that although the common variable of the three models (models I~III) is the number of entry lanes, the specific variables are entry lane width, roundabout sign, number of circulatory roadways, splitter island, number of exit lanes, exit lane width, number of approach roads, and truck apron. CONCLUSIONS : The results of this study can provide suggestive countermeasures for decreasing the number of roundabout accidents.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.39-46
• /
• 2015

PURPOSES: The operational characteristics of roundabouts are generally influenced by location as well as traffic volume. The goal of this study is to develop urban and rural roundabout accident models and to discuss safety improvement guidelines based on the model. METHODS : To analyze accidents, count data models are utilized in this study. This study used accident data from 2010 to 2013 for 56 roundabouts collected from the Traffic Accident Analysis System (TASS) of Road Traffic Authority. Poisson and negative binomial regression models were developed for this study using NLOGIT 4.0. RESULTS : The main results are as follows. First, the hypotheses that there are distributional differences in the number of accidents and injuries/fatalities among rural and urban roundabouts were accepted. Second, Poisson and negative binomial regression accident models, which were all statistically significant, were developed. Seven independent variables, which were statistically significant, were adopted. Third, the common variable of models was evaluated to be traffic volume. CONCLUSIONS : This study developed two negative binomial roundabout accident models and suggested some accident reduction strategies. The results are expected to give some implications to the safety improvement of roundabout.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.53-64
• /
• 2002

The purpose of this study was to predict the future urban activities effectively and rationally. For the purpose, a simulation model, based on SD, was built by integrating economic activities, land use and traffic of a city and by dividing Daegu Metropolitan City into seven districts and one county. To identify the effect of the development of a new city in the Dalsung County area, the future population and traffic volume of the city were predicted, using the model. The results are summarized as follows. The future population according to the development of a new city in the Dalsung County area was predicted, and the effects before and after the development twenty years later were compared. The future population of the Dalsung County was found to have slightly increased, whereas that of the adjoining Dalsuh Metropolitan District was found to has slightly decreased. For the other districts, there were no changes of the future population. It was found, therefore, that the development of a new city would have no effect on other districts. Then, the traffic volume according to the development of a new city in the Dalsung County area was also predicted. It was found that in the initial stage the traffic volume would increase with the increase in population of Dalsung County. It was predicted that particularly,. the traffic volume for the purpose of business would greatly increase. The traffic volume of Dalsuh Metropolitan District showed a slight decrease, whereas for the other districts, there were no changes of the traffic volume.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.99-105
• /
• 2014

Since traffic accidents account for the highest proportion of the artificial disasters which occur in urban areas along with fire, more scientific an analysis on the causes of traffic accidents and various prevention measures against traffic accidents are needed. In this study, the research selected Jinju-si, which belongs to local small and medium-sized cities as a research target to analyze the characteristics of temporal and spacial distribution of traffic accidents by associating the data of traffic accidents, occurred in 2013 with the causes of traffic accidents and location information that includes occurrence time and seasonal features. It subsequently examines the spatial correlation between traffic accidents and the characteristics of urban space development according to the plans of land using. As a result, the characteristics of accident distribution according to the types of accidents reveal that side right-angle collisions (car versus car) and pedestrian-crossing accident (car versus man) showed the highest clustering in the density analysis and average nearest neighbor analysis. In particular, traffic accidents occurred the most on roads which connect urban central commercial areas, high-density residential areas, and industrial areas. In addition, human damage in damage conditions, clear day in weather condition, dry condition in the road condition, and three-way intersection in the road way showed the highest clustering.