• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.304-310
• /
• 2001

A numerical model which simulates the heat and mass transfer processes within a counter-current plate type generator for ammonia/water absorption refrigerators was developed. Ammonia/water solution flows downward under gravity and ammonia/water vapor generated by flow boiling flows upward. The flow pattern within the generator was assumed to be a bubbly flow, and the liquid and vapor phase were assumed to be saturated. It was shown that the boiling of ammonia occurred mainly in the upper part of the generator. The effects of the generator length, the wall temperature and the mass flow rate of ammonia/water solution into the generator on the generation of ammonia/water vapor were investigated.

• Journal of Biosystems Engineering
• /
• 제32권3호
• /
• pp.145-152
• /
• 2007

Uniformity of spray deposit is one of the important factors in spray performance affecting efficacy of pest management. Distributions of spray deposit on artificial targets were measured and analyzed to enhance the efficiency of spray application. The research was studied to understand the deposition characteristics of spray droplets and to determine the optimum conditions of chemical application. The deposit and its pattern by the lower fan speed was more uniform and higher than that by the higher fan speed. The upward blasting distance was limited within 3 m, but the limit to the ground level was expanded the distance more than 3.5 m because of the accumulated droplets. When the fan speed was higher at the distance of 2.5 m, deposit reached to maximum. When the distance increased, deposit was getting lower. At the both fan speeds, the deposit was concentrated below $30^{\circ}$ because of the gravitation and the resistance of wind. This research can be useful in designing an orchard sprayer and its operation for various tree canopies. To achieve a uniform distribution of deposit using the air-blast type orchard sprayer, the application rate from the middle boom should be increased as the air velocity to the upward increased. The spray rate to the side boom should be limited in a minimal level.

• 간호행정학회지
• /
• 제21권4호
• /
• pp.366-374
• /
• 2015

Purpose: This study was designed to identify a path model that anticipates the interpersonal competence of nurses by anticipating factors that explain interpersonal competence within an organization, and analyzing the effects of these factors. A hypothetical model was formulated based on a literature review of interpersonal competence. For the study, influential factors were divided into two variables: exogenous variables including communication style, coaching leadership, and social support, and endogenous variables of self-efficacy, job satisfaction, and organizational commitment. Methods: The sample included 202 hospital nurses. Data were collected through questionnaires and analyzed using SPSS and AMOS. Results: The overall fitness was good ($x^2=74.707$, p<.001), d.f=19, $x^2/df=3.932$, GFI=.940, AGFI=.826, RMR=.009). Social support, self-efficacy, horizontal communication and organizational commitment directly affected the interpersonal competence of the nurses, and informal type of communication, horizontal, upward communication and coaching leadership indirectly effected the interpersonal competence of the nurses. Horizontal communication, social support, self-efficacy, and organizational commitment explained 46.5% of the variance in interpersonal competence of nurses. Conclusion: Based on the study results, nurses in hospitals need informal types of communication, horizontal, upward communication and coaching leadership to increase their interpersonal competence.

• International Journal of Safety
• /
• 제5권2호
• /
• pp.18-23
• /
• 2006

Studies have claimed that ESE (Early Streamer Emission) air terminals offer a vastly increased zone of protection over that of traditional lightning rods (Franklin rods) by causing the emission of an upward streamer/leader: The upward streamer/leader will propagate towards the tip of the downward leader at an early stage in the attachment process.. This paper shows the results of a performance evaluation test of a particular type of the ESE air terminal (called "ElecHippo") with a simple rod tested at the Korea Electrotechnology Research Institute (KERI). The corona emission current of the ElecHippo made by Yong-Jin Enterprise Corp. has also been measured at the Occupational Safety & Health Research Institute (OSHRI). The results show that the ElecHippo meets the French standard of NFC 17-102-1995. The results also verify the ESE performance by measuring the ion emission current generated in the discharge electrode gap as a function of the capacitance and inductance of the equipped devices. Finally, we propose a new method for grounding the system to reduce the lightning damage by combining the ESE air terminal, the early discharge earth plate, the lightning strike recorder and the surge protection device.

• 태양에너지
• /
• 제19권4호
• /
• pp.11-20
• /
• 1999

The study on ice thermal storage system is to improve total system performance and increase the economical efficiency in actual air-conditioning facilities. To obtain the high charging and discharging efficiencies in ice thermal storage system, the improvement of thermal stratification is essential, therefore the process flow must be piston flow in the cylindrical type. In the influence of the inlet port type, the inflowing water in the distributor type diffuses through the whole storage tank more than in the slot type. In case of the flow process in the ice storage tank, the upward flow type in the charging process and the downward flow type in the discharging process make the stratification well, thereby the loss of energy wored be smaller. The influence of the inlet temperature difference and the change of the inlet flow rate is intensive when the temperature difference is larger, the flow rate is smaller in case of charging and the results are opposite in case of discharging with the reason that the good coduction condition. The total effeciency of the ice thermal storge system is 73% on condition that the porosity in the thermal storage tank is 0.55. This result shows that cylinderical ice storage tank has better storage capacity than rectangular type in case of the same porosity.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.426-433
• /
• 2010

This study was conducted to develop a pull-type sprayer which performs the safe spraying with improved ergonomic postures while pesticide spraying of roses in floricultural facilities. The performance of the ergonomically designed sprayer was analyzed with a comparison of a conventional spray method. The pull-type sprayer, consisting of power pump, hose and nozzle parts was designed to manually pull and spray to upward and horizontal directions. From the analysis of postures with the RULA method, the labor load to arm and wrist using the pull-type sprayer was less than that with conventional power sprayer, so that the intensity of labor reduces. Working capacity with pull-type sprayer was two-fold greater than the conventional power sprayer. After performing pesticide spraying with the pull-type sprayer, the operating cost was reduced to \585,000/yr, which is 79% less than that of cost (\2,197,500/yr) for using conventional power sprayer.

• 대한치과보철학회지
• /
• 제37권1호
• /
• pp.104-126
• /
• 1999

The purpose of this study was to compare and evaluate the stress distribution and displacement developed in the abutment teeth and residual ridge area by madibular unilateral distal extension removable partial denture with 2 different retainer designs. The retainers on right and left canine and right 2nd molar were Alters clasp in one model and telescopic crown in the other model. The stress distribution of abutment teeth and residual ridge area on two model were compared and analyzed with 3-dimensional finite element method. 150N and 400N forces were applied vertically, 30 degree and horizontally on the central fossa area of left 1st molar of the removable partial denture, and then stress distribution patterns were analyzed and compared. The results were as follows 1. As the magnitude and angulation of applied force were increased, the magnitude of stress on the right and central residual ridge area and the right canine of the telescopic type increased and comparing to those of the Alters clasp type. 2. As the magnitude and angulation of applied force were increased, the mesial direction of displacement on the right residual ridge area and the right tooth of the telescopic type increased and the distal direction of displacement on left residual ridge area and the left canine increased comparing to those of Akers clasp type. 3. As the vertical force was applied, the distal direction of the displacement of the right tooth were greater and that of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. 4. As the 30 degree force was applied, the mesial direction of the displacement of the right tooth were greater and the distal direction of the displacement of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. In the horizontal force the results were same in right area tooth but the distal direction of displacement was greater in left canine. 5. In both removable partial dentures, as the magnitude and degree of force were increased, the stress and displacement were increased. The compressive force was dominative than the ten sile force. 6. In both removable partial dentures, the magnitude of stress was greater on mucosal tissue area than that of the alveolar bone area on distal extension residual ridge area but the result was reversed on anterior residual ridge area. The displacement was always greater on mucosal tissue area than that of alveolar bone area.

• 태양에너지
• /
• 제19권1호
• /
• pp.19-27
• /
• 1999

In this study, basic design data which were required for development of highly efficient ice storage system with low temperature latent heat were experimentally obtained. The ice storage system considered in this study was the one that has been widely used in the developed country and called the ice-on-coil type. Using the system, the ice storage performance for various design parameters which were the flow direction and the inlet temperature of the secondary fluid was tested. In addition, the clockwise variation of the heat transfer characteristics of the PCM in the ice storage tank were investigated. During the melting processes in the ice storage tank with several vertical tubes, decrease of the solid-liquid interface area, which was the heat transfer area, between the floating ice and the water made the decreasing rate of IPF less. Also, the total melting energy for the upward flow of the secondary fluid was higher than that for the downward flow during the melting process, but this trend did not appear if the initial temperature of the PCM was $4^{\circ}C$. The average ice recovery efficiency for the upward flow of the secondary fluid was higher than that for the downward flow.

• 산업융합연구
• /
• 제20권11호
• /
• pp.105-112
• /
• 2022

본 연구의 목적은 경영자의 능력과 경영자 성과-보상 민감도 간의 관련성에 보고이익전략이 미치는 조절효과를 살펴보는 것이다. 경영자의 보고이익전략에 따른 경영성과의 조정 방향은 상향조정과 하향조정 모두 발생할 수 있으며, 상향 조정과 하향 조정에 따라 경영자 보상에 미치는 영향이 차별적일 것으로 예상되어 분석한 결과, 과대보고를 위한 보고이익전략은 기대와 동일하게 상향조정 된 경영성과에 따라 보상을 지급하였으므로 성과에 근거한 차별적인 보상이 지급되지 않는 것으로 확인되었다. 반면에 과소보고를 위한 전략은 성과에 근거한 성과-보상 민감도를 감소시키는 것으로 나타났다. 과소보고전략은 경영자의 능력에 따른 보고전략의 수행에 대하여 추가적인 보상이 지급되어 보상의 수준은 증가하지만, 이러한 유형의 보상이 경영자의 실제 성과와는 무관하므로 성과-보상 민감도를 감소시킬 것이라는 가설을 지지하며, 보고이익전략에 따른 경영성과의 상향 및 하향 조정에 대해 차별적인 보상이 이루어진다는 것을 간접적으로 확인한 결과이다.

• 한국의류학회지
• /
• 제16권4호
• /
• pp.357-369
• /
• 1992

The purpose of this study was to clarify the relationship between the Ideal Beauty of Body and the Form of Dress, and to analyze its historical perspectives. First of all, the concept of the Ideal Beauty of Body, the definition of Dress Form, and the method and system to clarify Dress Form were depicted. Based on this frame work, the Form of Dress related to the Ideal Beauty of Body was described historically. For this purpose, documentary research were conducted and representative photography and paintings were used. The analysis was limited to the female one-Piece dress from Ancient Egypt, Greece, Rome, Byzantine, Gothic, Renaissance, Baroque, Rococo, Naoclassicism, and to Romanticism. The results were as follows: 1. The Ideal Beauty of Body was found to be different throughout history and to be intimate- ly linked with fashionable dress. 2. The Form of Dress consisted of four basic components: The form of body itself, the form of clothing itself, the method of wearing, and the relationship between body and clothing. 3. The standards for classification of body form were body structure, body type, body proportion, posture, and movement. Clothing form was generally classified into flat type (unstructured type) and three dementional type (structured type); flat type was subclassified into draped type and tunic type. The method of wearing was classified into attached type, tying-up type, wrap·around type, pull-over type, open type and plastistic type. The relationship between body and clothing after wearing was generally classified into body priority type and clothing priority type. The clothing priority type was further divided into body exaggeration type and body concealment type; Body exaggeration type was further divided into upward type, downward type, forward type, backward type, right type and constriction type. 4. The pursuit of venus coelestis, metaphysical body part, ectomorphic body type, flat type clothing, body priority type; the pursuit of Venus Naturalis, physical body part, endomorphic body type, three dementional type clothing, clothing priority type proved to be closely related respectively by the historical study on the Ideal Beauty of Body and the Form of Dress.