• Solar Energy
• /
• v.19 no.4
• /
• pp.11-20
• /
• 1999

The study on ice thermal storage system is to improve total system performance and increase the economical efficiency in actual air-conditioning facilities. To obtain the high charging and discharging efficiencies in ice thermal storage system, the improvement of thermal stratification is essential, therefore the process flow must be piston flow in the cylindrical type. In the influence of the inlet port type, the inflowing water in the distributor type diffuses through the whole storage tank more than in the slot type. In case of the flow process in the ice storage tank, the upward flow type in the charging process and the downward flow type in the discharging process make the stratification well, thereby the loss of energy wored be smaller. The influence of the inlet temperature difference and the change of the inlet flow rate is intensive when the temperature difference is larger, the flow rate is smaller in case of charging and the results are opposite in case of discharging with the reason that the good coduction condition. The total effeciency of the ice thermal storge system is 73% on condition that the porosity in the thermal storage tank is 0.55. This result shows that cylinderical ice storage tank has better storage capacity than rectangular type in case of the same porosity.

• Human Ecology Research
• /
• v.61 no.3
• /
• pp.375-387
• /
• 2023

In research on housing welfare policy, there has been little interest in middle-aged households compared with young or elderly households. The purpose of this study was to explore influences on the housing satisfaction of middle-aged renter households using microdata from the Korea Housing Survey 2021. A statistical analysis of data was performed on a total of 2,709,152 middle-aged (aged between 40 and 64 years) Jeonse (lumpsum housing lease) renters and monthly renters with deposits, living in private rental housing units. The major findings were as follows. Firstly, there were significant differences in housing unit satisfaction and residential environment satisfaction among renter groups by age and rental type. Early-middle-aged Jeonse renters displayed the highest satisfaction with both housing units and the residential environment, while semielderly monthly renters with deposits displayed the lowest satisfaction. Secondly, living in aged structures or in apartment units exerted the strongest influences on housing satisfaction, which implies the need for residential area regeneration programs that consider the situation of rental households. Thirdly, living in Incheon and Gyeonggi-do was found to have a negative influence on housing satisfaction. Fourthly, upward filtering on tenure types or lease renewal of the current house did not necessarily have a positive influence on the housing satisfaction of middle-aged renters. Based on the findings, suggestions were made to improve the housing situation of middle-aged renter households.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.52-57
• /
• 1995

In order to suggest the proper cutting conditions of the CNC milling machining for the free-from surface, some experiments were carried out. In experiments, the influence of cutting conditions on the inclined spherical surface were examined by geometrical anlysis. In thos study, the roundness and cutting force were measured to know the effect of several cutting conditions on the machined surface and the cutting characteristics were carefully investigated. As the result, it was appeared that rigidder tool must be used and the cutting speed must be maintained constantlyfor more effective machining. It can be also known from the experiments that the improved machining surface obtained under about 80 degree, but coarse surface obtained over about 80 degree because of the existance of immproper shape of ball-end mill at the extreme portion.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.75-90
• /
• 2001

For the purpose of helping development of a GDI(Gasoline Direct Injection) engine, the in-cylinder phenomena, such as the spray behaviors and fuel distributions, unburned fuel, and flame characteristics were investigated in a single cylinder GDI engine. The GDI engine was equipped with a swirl type electronic injector and SCV(Swirl Control Valve). PLIF(Planar Laser Induced Fluorescence) system with KrF Excimer laser was used for the measurements of the fuel distributions. The effects of the injector specifications, such as the spray cone angle and the offset angle on the fuel distributions and combustion characteristics were investigated. As a result, it was found that the injected fuel spray collided with the bottom of the bowl and moved upward along the exhaust side wall of the piston bowl. This fuel vapor played a important role in the instance of spark ignition. The injector specifications has a great influence on the flame characteristics.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.9-13
• /
• 2007

We describe how to control a piezoelectric actuator using the open-loop method for point-to-point positioning. Since piezoelectric actuators have nonlinear characteristics due to hysteresis and creep between the input voltage and the resulting displacement, a special method is required to eliminate this nonlinearity for an open-loop drive. We have introduced open-loop driving methods for piezoelectric actuators in the past, which required a large input voltage and an initializing motion sequence to reset the state of the actuator before each movement. In this paper, we propose a new driving method that uses the initializing state. This method also utilizes the overshoot from both the upward and downward stepwise drives. Applying this method., we obtained precise point-to-point positioning without the influence of hysteresis and creep.

• Journal of the Korean housing association
• /
• v.7 no.1
• /
• pp.1-13
• /
• 1996

The objective of this study was to investigate changes in housing quality and residential satisfaction among the New Town movers. Numerous literatures pertaning to the subject were thoroughly reviewed, and a set of hypotheses was drawn therefrom. Methodology applied to the study included bivariate and multivariate analyses for both derivation of descriptive statistics and hypotheses testing. SPSS PC+ for window(version 6.2) was used to analyze the data collected by Korea Research Institute for Human Settlements(KRIHS) in 1993. The major findings are highlited as follows : 1) Regardless of the household income level and other characteristics housing quality has improved substantially by moving to new towns. 2) The level of residential satisfaction is increased as a result of moving to new towns. 3) Upward changes in housing quality strongly influence the change in residential satisfaction. Both variables to be highly correlated. 4) These most satisfied residents are those who moved to the large size of dwellings and they are mostly high income families.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.180-189
• /
• 2023

We measured the heat load to a reactor vessel with and without the in-vessel debris bed under an IVR-ERVC condition. Mass transfer methodology was adopted based on heat and mass transfer analogy to achieve high Ra'_H of order ~10¹⁵ with compact test rigs. We postulated the in-vessel debris bed has a flat top and particulate debris was simulated as an identical diameter spheres. We conducted experiments varying the height of the debris bed and the results showed that Nusselt numbers decreased in both uppermost and curved surfaces with the increasing bed height. Once the debris bed is formed, it acts as an obstacle to the natural convective flow, which reduces the buoyancy. The reduction of driving force results in the impaired heat transfer in both upward and downward heat transfers.

• Journal of Oral Medicine and Pain
• /
• v.21 no.1
• /
• pp.89-101
• /
• 1996

This study was performed to investigate influence of the changes of head posture on resting electromyographic (EMG) activity in anterior temporalis, masseter, sternocleidomastoid muscle and trapezius, and on status of occlusal contacts. For this study twenty-nine patients with temporomandibular disorders(TMD) and thirty dental students without any masticatory symptoms were selected as patients group and control group, respectively. EMG activity($\mu$V) at rest was observed in four kind of head postures such as natural or normal head posture(NHP), forward head posture(FHP), upward head posture(UHP), downward head posture(DHP), and in NHP and FHP, EMG activity with flat occlusal splint was also checked. BioEMG$^\textregistered$(Bioelectromyograph, Bioresearch Inc., USA) was used to record EMG activity in the above four muscles with eight locations on both sides. The author used T-Scan$^\textregistered$(Tekscan Co., USA) system to investigate the changes of oclusal contats on clenching in the four head postures about number, force, time(duration) and total left-right statistis(TLR, occlusal stability crossing left-right dental arch on clenching). For taking in upward or downward head posture, head was inclined $10^{\circ}$ upward or downward and CROM$^\textregistered$ (cervical-range-of motion, Performance attainment Inc., USA) was used to maintain same posture during the procedure. The results obtained were as follows : 1. For resting EMG activity, anterior temporalis did not show any difference by change of head posture, but masseter and sternocleidomastoid muscle showed higher value of EMG activity in FHP and UHP, and trapezius showed higher value of EMG activity in FHP and DHP. 2. EMG activity of trapezius was higher than that of any other muscles in NHP, FHP, and DHP, but in UHP, the activity was the lowest reversely. 3. Patients group showed higher EMG activity than control group did in all the muscles in NHP. And significant difference between the two groups were also observed in anterior temporalis in FHP, in sternocleidomastoid muscle in UHP, and in sterno-cleidomastoid muscle and trapezius in DHP with higher activity in patients group. 4. There was no change of EMG activity in NHp with splint, but EMG activity in anterior temporalis and masseter was decreased in FHP with splint. 5. In general, status of occlusal contacts was not changed with head posture in all subjects, and difference between patients group and control group was only noted for number and force of tooth contact in UHP and DHP with more value in control group. 6. Correlationship between EMG activity and number ad force of tooth contacts was shown negatively with regard to masseter in NHP, and trapezius in UHP and DHP.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.45-51
• /
• 2016

The purpose of this study is to investigate the influence of train-induced end rotation of simple supported track girder on the performance of a direct fixation track system (DFTS) in Yeongjong grand bridge. In this study, the influences of deflection of a DFTS and track girder on dynamic rail-track girder interaction forces for the track girder ends currently employed in airport express lines were assessed by performing field tests using actual vehicles running along the service lines. Therefore, the dynamic displacement of rail and track girder and the fastener stress on the center and ends sections of DFTS were measured for two different trains (AREX and KTX) running in Yeongjong grand bridge. A three-dimensional finite element analysis (FEA) model using the time-history function based on the design wheel load was used to predict the train-induced track and track girder displacement, and the FEA and field test results were compared. The analytical results reproduced the experimental results well within about 3-7% difference in the values. Therefore, the FEA model of DFTS on track girder is considered to provide sufficiently reliable FEA results in the investigation of the behavior of DFTS. Using the analytical and experimental results, the influence of train-induced end rotation of simple supported track girder on the interaction behavior of rail and track girder installed on a simple supported track girder ends, i.e., upward displacement of rail-track girder and the fastener stress, was investigated. It was found that the train-induced end rotation effect of track girder was not significantly affected by the upward displacement of rails and the fastener stresses of track girder ends. Further, the interaction behavior of rail and track girder were similar to or less than that of the general railway bridge deck ends, nevertheless the vertical displacement of track was higher than that of conventional DFTS on the general railway bridge. From the results, the dynamic responses of the DFTS on track girder ends were not significantly affected by the safety and stability of DFTS ends.

• Environmental Engineering Research
• /
• v.11 no.5
• /
• pp.241-249
• /
• 2006

A mathematical model is described for the prediction of convective upward transport of an organic solvent driven by evaporation at the surface, which is known as the major transport mechanism in the in-situ photolysis of a soil contaminated with 2,3,7,8-tetrachlorodibenzo-p-dioxin(TCDD). A finite-element model was proposed to incorporate the effects of multiphase flow on the distribution of each fluid, gravity as a driving force, and the use of hysteretic models for more accurate description of k-S-p relations. Extensive numerical calculations were performed to study fluid flow through three types of soils under different water table conditions. Predictions of relative permeability-saturation-pressure (k-S-p) relations and fluids distribution for an illustrative soil indicate that hysteresis effects may be quite substantial. This result emphasizes the need to use hysteretic models in performing flow simulations including reversals of flow paths. Results of additional calculations accounting for hysteresis on the one-dimensional unsaturated soil columns show that gravity affects significantly on the flow of each fluid during gravity drainage, solvent injection, and evaporation, especially for highly permeable soils. The rate and duration of solvent injection also have a profound influence on the fluid saturation profile and the amount of evaporated solvent. Key factors influencing water drainage and solvent evaporation in soils also include hydraulic conductivity and water table configuration.