• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.165-174
• /
• 2007

The subject of this study was male apparatus gymnastics athlete who had scored high points doing basket with 1/2 turn on parallel bars. Then 3D motion analysis were used to calculate & analyse kinematic variables of Basket with 1/2 turn to Handstand. 1. The total average time spent for Basket with 1/2 turn took $2.16{\pm}.08sec$, at the downward upward phase took $.58{\pm}0.00sec$, $.23{\pm}.00sec$, at flight phase took $.28{\pm}.01sec$, at connected area phase took $.72{\pm}0.21sec$, at rotation area phase took $.35{\pm}.14sec$. To have a successful performance, there should be faster speed and velocity to rotate at the downward upward phase, then the upward velocity and height must be used adequately. Moreover, the speed must be faster at the flight connect phase to stabilize Center of Mass(CM) for the body, and must secure more time at the rotation area to have more stable performance. 2. After handstand on parallel bars while moving CM to right hand side, and It must be performed with big and magnificent performance with putting both hand's center to far away from the parallel bars. 3. Furthermore, CM must be moved fast from downwards to right hand side, and CM must be moved fast in vertical movement at upward and flight phase to avoid CM from moving back and forth, and left and right. 4. At downwards, the subject must rotate as bis as possible using hip-joint as wide as possible and at upwards, must put his body to vertical to have stable performance. While rotating or turning, it is better to do with bigger shoulder angle and have to make sure that trunk angle must be not scattered. To perform better and more positive in basket with 1/2 turn on parallel bars, the centrifugal force must be used big and fast at downward, and at upward and flight phase, downward movement must change to vertical movement as soon as possible while turning movement must happen at handstand position. Time spent must be shorten at connected area to stabilize CM and turning must be natural as possible while securing the necessary time of movement to well-balanced. Also, the body must be vertically closed from the ground.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.574-590
• /
• 2016

This research aims to examine the effects of various types of social comparison in SNS on users' life satisfaction. For this, this research posited four types of social comparison including upward contrast, upward identification, downward contrast and downward identification that might affect SNS users' life satisfaction. Several other factors including demographic variables, SNS usage time, offline social capital and social comparison orientation as control variables were taken into account and the moderating effects of social comparison orientation in the relationships between four types of social comparison and users' life satisfaction was also examined. An online survey was employed for collecting data and the date collected were analyzed with hierarchical regression analysis. The results showed that ages and marriage status have influences on SNS users' life satisfaction. It was proven that the degrees to which SNS users participate in family activities and club/group activities in which they are interested have correlations with their life satisfaction. The findings also revealed that only upward contrast and upward identification among four types of social comparison have influences on the life satisfaction and there is the moderating effect of social comparison orientation on the relationship between upward identification and life satisfaction. On the basis of the results, the necessity of new perspectives in understanding social comparison experience in SNS as compared to the existing literature were discussed.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.377-382
• /
• 2021

Oriental melon (Cucumis melo L.) is generally cultivated on the ground by creeping culture. A farmer has a higher workload for training stems. This study was conducted to find out a new cultivation of oriental melon to reduce a workload and improve the quality of fruit. There were three treatments for training stem of oriental melon; upward stem growing, downward stem growing, control (creeping stem growing). The results of the plant growth and the net photosynthesis showed higher in upward stem growing. The root activity was higher in downward stem attract. The yield was not significant as 4,055kg/10a in upward stem attract and 3,983kg/10a in downward stem attract. According to the results of the ergonomic agricultural workload evaluation, in the case of the working posture, the working posture of creeping cultivation methods (squatting, bending) showed a higher risk level than the upward and downward cultivation methods. Therefore, it is recommended the upward stem attract of oriental melon is a new cultivation as well as an alternative method for creeping stem attract in terms of improving the plant growth and yield, and reducing the workload.

• Journal of Korea Foundry Society
• /
• v.10 no.1
• /
• pp.57-63
• /
• 1990

Continuous casting of the $Al-CuAl_2$ eutectic composite was carried out by the upward continuous casting process. The morphology of the eutectic growth and the stability of solid-liquid interface were investigated under various growth conditions. It was possible to get the planar solid-liquid interface at the condition of $G_L/R$＝$3.6{\times}10^3^{\circ}Csec/mm^2$. And the colony structures were formed at the conditions of $G_L/R$ < $R=0.33{\times}10^3^{\circ}Csec/mm^2$. The inter-lamellar spacing of $Al-CuAl_2$ eutectic composite was decreased with the increase of pulling speed. The reduction of inter-lamellar spacing & value of $G_L/R$ caused the increase of ultimate tensile strength and Rockwell hardness in $Al-CuAl_2$ eutectic composite.

• Economic and Environmental Geology
• /
• v.23 no.3
• /
• pp.353-358
• /
• 1990

This paper presents numerical experiments on migration of synthetic seismograms using by $45^{\circ}$ wave equation. The seismograms used are zero-offset seismogram (corresponding to stacked section) on point reflectors, dipping plane reflector, faulted and folded layers. The seismograms are constructed by upward continuation of seismic source wavelets, exploading on subsurface reflection interfaces, to the earth surface. The synthetic seismograms are migrated by downward continuation and imaging. The upward and downward continuations are implemented by solving the $45^{\circ}$ wave equation with the finite-difference method. Migration of the synthetic data used in this study results in relatively accurate reposition of subsurface structures while the synthetic sections are quite different from the structures.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1329-1332
• /
• 2014

The kinetic studies on the reactions of O,O-diethyl Z-S-aryl phosphorothioates with X-pyridines have been carried out in dimethyl sulfoxide. The free energy correlations with X in the nucleophiles are biphasic concave upwards with a break point at X = H, while those for substituent Z variations in the leaving groups are linear. The negative sign of ${\rho}_{XZ}$ implies that the reaction proceeds through a concerted mechanism for both the strongly and weakly basic pyridines. The biphasic concave upward free energy relationships with X are rationalized by a change in the nucleophilic attacking direction from frontside with the strongly basic pyridines to backside with the weakly basic pyridines.

• Journal of Korea Port Economic Association
• /
• v.21 no.4
• /
• pp.255-274
• /
• 2005

To acquire a port traffic, governments in North-East Asia have intensively invested port development. Furthermore, the major shipping company directly make a call at northern chinese ports like Qingdao, Dalian and Tianjin. Those changes of port environment will have a considerable effect on a port traffic in Korea. In order to prepare against those changes, it is necessary to estimate a port traffic in Korea A port traffic in Korea is estimated by the use of explanation variables like GDP of Korea, real effective exchange rate, world economic performances and the trade in China, et al. When GDP in Korea goes up 1%, it is estimated that container port traffic of all ports and Pusan Port is upward $1.0{\sim}1.2%$ and $0.8{\sim}0.9%$ respectively. When the trade in China goes up 1%, it is estimated that Container transshipment is upward $1.6{\sim}1.7%$ approximately.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.1 no.1
• /
• pp.5-14
• /
• 2002

Hemisphere shapes were machined for different tool paths and machining conditions with ball endmill cutters. It was also found out how feedrate affect the precision of the machining and also tried to study the most suitable feedrate in specific cutting condition. Tool deflection, cutting forces and shape accuracy were measured according to the inclination position of the sculptured surface. As the decreasing of inclination position angle, the tool deflection was increased due to the decreased cutting speed when the cutting edge is approaching toward the center. Tool deflection when upward cutting IS obtained less than that of downward cutting and down-milling in upward cutting showed the least tool deflection for the sculptured surface. For down-milling, the cutting resistance of the side wall direction is larger than that of feed direction. It was found that the tool deflection is getting better as tool path is going to far from the center for convex surface.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.9
• /
• pp.674-681
• /
• 2009

Turbulent mixed convection in heated vertical annulus is investigated using Direct Numerical Simulation (DNS) technique. The objective of this study is to find out the effect of buoyancy on turbulent mixed convection in heated vertical annulus. Downward and upward flows with bulk Reynolds number 8500, based on hydraulic diameter and mean velocity, have been simulated to investigate turbulent mixed convection by gradually increasing the effect of buoyancy. With increased heat flux, heat transfer coefficient first decreases and then increases in the upward flow due to the effect of buoyancy, but it gradually increases in downward flow. The mean velocity and temperature profiles can not be explained by the wall log laws due to the effect of buoyancy, too. All simulation results are in good quantitative agreement with existing numerical results and in good qualitative agreement with existing experimental results.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.146-154
• /
• 1994

A series of numerical calculations are performed in order to investigate the dispersion mechanism of toxic gaseous and solid pollutants in extremely short-term and short range. The calculations are carried out in an open space characterized by turbulent boundary layer. The simulation is made by the use of numerical model, in which a control-volume based finite difference method is used together with the SIMPLEC algorithm for the resolution of the pressure-velocity coupling problem. The Reynolds stresses are solved by two-equation, k-$\varepsilon$ model modified for buoyancy. The major parameters consider-ed in this study are temperature, velocity and Injection height of toxic gases, environmental conditions such as temperature and velocity of free stream air, and topographic factor. The results are presented and discussed in detail. The flow field is commonly characterized by the formation of a strong recirculation zone due to the upward motion of the hot toxic gas and ground shear stress. The driving force of the upward motion is explained by the effect of thermal buoyancy of hot gas and the difference of inlet velocity between toxic gas and free stream.