• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.1-12
• /
• 1990

본 연구에서는 자유단조용 프레서를 이용하여 돌출부가 있는 비대칭 중공형단 조 제품을 생산할 수 있도록 금형장치를 설계.제작하고, Fig.1에서 보는 바와 같이 경 사진 돌출부가 있는 비축대칭 복합단조에 UBET를 적용하여 해석하였다. 단조시편은 원주형태를 가지도록 하였다. 즉 원주형 소재가 요구되는 비축대칭 단조제품으로 변 형되는 과정에서 단조하중, 재료가 돌출부를 충만하도록 하는 유동특성, 재료가 돌출 부로 차들어가는 속도 등에 영향을 주는 인자(예:펀치 직경의 크기, 금형 상하면의 각 도)의 특성을 이론적으로 해석하고 실험으로 확인하였다.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.362-369
• /
• 2007

APSK(Amplitude Phase Shift Keying) 계열의 디지털 변조 방식은 전송 심볼들이 성상도 상에서 원형으로 분포해 있는 구조적 특성을 갖고 있다. 이러한 구조로 인하여 QAM(Quadrature Amplitude Modulation) 계열의 변조 방식과 비교하여 평균 전력 대비 최대 전력의 크기를 감소시키는 효과를 얻을 수 있으며, 비선형 채널 환경에서 전송 시 성능 열화 정도를 감소시킬 수 있다. 이와 같은 장점으로, APSK 변조 방식은 최근 DVB-S2(Digital Video Broadcasting-Satellite, Version 2)를 포함하는 위성 통신 시스템에서 표준으로 채택되고 있다. 본 논문에서는 일정 크기 이상의 입력 전력 크기에 대해서는 출력 전력 크기가 포화되는 특성을 갖는 채널 모델을 사용하여, 16APSK 변조 방식 적용의 비트 오율 (BER; Bit Error Rate)의 상한 근사식을 유도하고 실제 실험 결과와 비교하여 정확성을 검증한다. 또한 유도식을 활용하여 비트 오율을 최소화시키는 입력 전력의 크기를 결정하였으며, 16APSK 내각원 반지름과 외각원 반지름 비율 및 비선형 채널의 포화 특성에 따른 성능 최적화 방안을 제시한다.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.285-299
• /
• 1993

본 연구에서는 UBET를 이용한 프로그램을 개발하여 소성가공 문제에 적용하였 으며, 형단조 가공에서 형 내부의 재료의 비정상 유동을 해석할 수 있는 알고리듬을 제시하였다. 매 변형단계에서 요소별 가공경화를 고려하여 자동적으로 요소시스템 (element system)을 재구성함으로써, UBET에 의한 소성가공 문제 해석을 효율적으로 할 수 있도록 하였다. 축대칭 형단조 문제에 있어서 리브의 높이대 폭의 비가 1.0, 2.0일때 UBET 및 탄소성 유한요소법에 의하여 형 내부의 재료 층만 과정을 시뮬레이션 하였으며, 단조 하중, 다이 충만도 및 재료의 유동 경향을 분석하여 적절한 유동 모델 과 초기 소재의 형상을 구하였다. 모델 재료를 사용한 형단조 모의실험을 수행하여 재료유동 및 변형 단계별 단조 하중분포 등을 구하였으며, 해석결과와 비교 분석하였 다. 또한 후방압출(backward extrusion) 및 평두형 펀치에 의한 평판압입(flat pu- nch indentation) 문제를 해석하였다. 후방압출시 모서리부의 라운딩(rounding) 효 과가 재료 유동에 미치는 영향을 고려하였으며, 평두형 펀치에 의한 평판압입에서는 상당 소성변형률(equivalent plastic strain)의 분포를 탄소성 유한요소법(elastic plastic finite element method)에 의한 결과와 비교하였다.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.367-377
• /
• 2020

Incremental dynamic analysis (IDA) widely uses for the collapse risk assessment procedures of buildings. In this study, an IDA-based collapse risk assessment methodology is proposed, which employs a novel approach for detecting the near-collapse (NC) limit state. The proposed approach uses the modal pushover analysis results to calculate the maximum inter-story drift ratio of the structure. This value, which is used as the upper-bound limit in the IDA process, depends on the structural characteristics and global seismic responses of the structure. In this paper, steel midrise intermediate moment resisting frames (IMRFs) have selected as case studies, and their collapse risk parameters are evaluated by the suggested methodology. The composite action of a concrete floor slab and steel beams, and the interaction between the infill walls and the frames could change the collapse mechanism of the structure. In this study, the influences of the metal deck floor and autoclaved aerated concrete (AAC) masonry infill walls with uniform distribution are investigated on the seismic collapse risk of the IMRFs using the proposed methodology. The results demonstrate that the suggested modified IDA method can accurately discover the near-collapse limit state. Also, this method leads to much fewer steps and lower calculation costs rather than the current IDA method. Moreover, the results show that the concrete slab and the AAC infill walls can change the collapse parameters of the structure and should be considered in the analytical modeling and the collapse assessment process of the steel mid-rise intermediate moment resisting frames.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권10호
• /
• pp.1691-1698
• /
• 2020

Objective: The study sought to estimate the relationship between body surface temperature (BST) and temperature humidity index (THI) and to present the validity of THI as a heat stress index in the field. Methods: Eight Hanwoo heifers (20 to 32 month) were examined in a field trial, with a space allowance of 10 ㎡ per head. The BST was measured using an infrared thermographic camera. The BST of five body regions (eyes, hindquarters, nose, part of horns, and ears), ambient temperature (AT), and relative humidity (RH) were measured 7 times daily (07, 09, 11, 13, 15, 17, and 19 h) during each season with three replicates. Results: The THI ranged 34.0 to 56.9 during spring (AT, -1.0℃ to 13.4℃), 75.1 to 84.7 during summer (AT, 24.9℃ to 33.6℃), 55.8 to 70.9 during autumn (AT, 13.0℃ to 26.0℃) and 17.5 to 39.2 during winter (AT, -10.4℃ to 1.0℃). In the regression analysis, the coefficient of determination (R²) between THI and BST was 0.88, 0.72, 0.83, 0.86, and 0.85 for the eyes, hindquarters, nose, part of horn, and ears area, respectively. This indicates that BST has a strong correlation with AT and RH. Expression equations were estimated as Y (THI) = 31.54+0.1085X (BST of eyes) and Y (THI) = 30.48+0.1147X (BST of hindquarters) by simple linear regression analysis in this experiment. Conclusion: Consequently, the upper bound for heat stress estimation can be specified ranging from THI of 65 (eyes) to 70 (hindquarters). From this we can expect a precise feeding system for Korean native cattle in the field.

• 대한의생명과학회지
• /
• 제8권4호
• /
• pp.235-244
• /
• 2002

This study was carried out to determine the blood and milk progesterone by enzyme-linked immunosorbent assay (ELISA), and milk urea nitrogen (MUN) in cows. MUN and protein concentration were determined using automated infared procedures. The optimum conditions of ELISA system was investigated including the first and second antibody titres, bound percent, and enzyme conjugate and also the factors on MUN and protein concentration by sampling procedures and addition of preservatives. Progesterone antibodies did not react to pregnenlone, testosterone, estrone, estradiol-l7$\beta$, aldosterone, cortisol, corticosterone and 11$\alpha$-dehydroxycortisone (DOC), but reacted with only progesterone. The intra and inter-assay coefficient of variation 4.5%, 6.1~9.4% when used of bovine serum. The morning, MUN concentration (17.6$\pm$2.8 mg/100 ml) in the 13 herds was similar to that of evening MUN concentration of the lactating cows from the same herd. A significant relationship between morning and evening milk samples of upper parameters was found r=0.93. Difference in MUN concentration with sampling procedures and using of preservatives were investigated.

• Structural Engineering and Mechanics
• /
• 제62권4호
• /
• pp.507-517
• /
• 2017

Due to the discontinuous nature of uncertainty quantification in conventional evidence theory(ET), the computational cost of reliability analysis based on ET model is very high. A novel ET model based on fuzzy distribution and the corresponding combination rule to synthesize the judgments of experts are put forward in this paper. The intersection and union of membership functions are defined as belief and plausible membership function respectively, and the Murfhy's average combination rule is adopted to combine the basic probability assignment for focal elements. Then the combined membership functions are transformed to the equivalent probability density function by a normalizing factor. Finally, a reliability analysis procedure for structures with the mixture of epistemic and aleatory uncertainties is presented, in which the equivalent normalization method is adopted to solve the upper and lower bound of reliability. The effectiveness of the procedure is demonstrated by a numerical example and an engineering example. The results also show that the reliability interval calculated by the suggested method is almost identical to that solved by conventional method. Moreover, the results indicate that the computational cost of the suggested procedure is much less than that of conventional method. The suggested ET model provides a new way to flexibly represent epistemic uncertainty, and provides an efficiency method to estimate the reliability of structures with the mixture of epistemic and aleatory uncertainties.

• 한국정보시스템학회지:정보시스템연구
• /
• 제18권4호
• /
• pp.41-57
• /
• 2009

Although financial information is a great influence upon determining of the group which use them, detection of management fraud and earning manipulation is a difficult task using normal audit procedures and corporate credit evaluation processes, due to the shortage of knowledge concerning the characteristics of management fraud, and the limitation of time and cost. These limitations suggest the need of systemic process for !he effective risk of earning manipulation for credit evaluators, external auditors, financial analysts, and regulators. Moot researches on management fraud have examined how various characteristics of the company's management features affect the occurrence of corporate fraud. This study examines financial characteristics of companies engaged in fraudulent financial reporting and suggests a model and system for detecting GAAP violations to improve reliability of accounting information and transparency of their management. Since the detection of management fraud has limited proven theory, this study used the detecting method of outlier(upper, and lower bound) financial ratio, as a real-field application. The strength of outlier detecting method is its use of easiness and understandability. In the suggested model, 14 variables of the 7 useful variable categories among the 76 financial ratio variables are examined through the distribution analysis as possible indicators of fraudulent financial statements accounts. The developed model from these variables show a 80.82% of hit ratio for the holdout sample. This model was developed as a financial outlier detecting system for a financial institution. External auditors, financial analysts, regulators, and other users of financial statements might use this model to pre-screen potential earnings manipulators in the credit evaluation system. Especially, this model will be helpful for the loan evaluators of financial institutes to decide more objective and effective credit ratings and to improve the quality of financial statements.

• 한국공간구조학회논문집
• /
• 제4권4호
• /
• pp.113-128
• /
• 2004

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of solid paraboloidal and complete (that is, without a top opening) paraboloidal shells of revolution with variable wall thickness. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. The ends of the shell may be free or may be subjected to any degree of constraint. Displacement components $u_r,\;u_{\theta},\;and\;u_z$ in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in ${\theta}$, and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the paraboloidal shells of revolution are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four digit exactitude is demonstrated for the first five frequencies of the complete, shallow and deep paraboloidal shells of revolution with variable thickness. Numerical results are presented for a variety of paraboloidal shells having uniform or variable thickness, and being either shallow or deep. Frequencies for five solid paraboloids of different depth are also given. Comparisons are made between the frequencies from the present 3-D Ritz method and a 2-D thin shell theory.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1774-1779
• /
• 2014

It is known that muscle strength of human body can alter or deteriorate as aging. In this study, we present an inverse dynamics simulation to investigate the effect of muscle strength on performing the daily activities. A 3D musculoskeletal model developed in this study includes several segments of whole body, long and short muscles, ligaments and disc stiffness. Five daily activities such as standing, flexion, finger tip to floor, standing lift close and lifting flexed were simulated with varying the maximum muscle force capacities (MFC) of each muscle fascicles from 30 to $90N/cm^2$ with an increment of $30N/cm^2$. In the result, no solution can be obtained for finger tip to floor and lifting flexed with $30N/cm^2$. Even though the solution was available for standing lift close activity in case of $30N/cm^2$ capacity, many of muscle fascicles hit the upper bound of muscle strength which means that it is not physiologically possible to perform the acvities in reality. For lifing flexed, even the case of $60N/cm^2$ capaciy, represents the moderate healthy people, was not able to find the solutions, showing that 18 muscles among 258 muscle fascicles reached 100% of muscle capacity. The estimated results imply that people who have low muscle strength such as elders or rehabilitation patients were required higher muscle work to perform and maintain the same daily activities than healthy one.