• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.127-138
• /
• 1991

A gear forming method by cold extrusion and an analytical method with its numerical solution program based on the upper bound method were developed. In the analysis the involute curve was as a shape of die and the upper bound method was used to calculate energy dissipation rate. By this method the power requirement and optimum conditions necessary for extruding helical(spur) gear were successfully calculated. These numerical solutions are in good agreement with experimental data. In the experiment, 4-6 class helical gear of KS standard for automobile transmission was successfully manufactured.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.45-59
• /
• 2011

This study introduces the diagrammatic Upper and Lower Bound (UB and LB) methods theoretically in order to derive the bearing capacity factor, $N_c$ in undrained clay and to compare with Prandtl's exact solution (1921). As a result of the theoretical study, an exact solution comes out when the UB and LB solutions are the same. In addition, the finite element analyses show that the failure loads approach to the bearing capacity factor of 5.14. Results of the FEA significantly depend on the finite element type, a number of elements, and a number of increments. From this study the exact solution defines that solutions from UB and LB are the same. However, this situation is very difficult to process, so we can confirm the exact solution as a range between UB and LB solutions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.1
• /
• pp.3-11
• /
• 2003

Face stability of a tunnel is a main concern during tunnel excavation. However, there has been only a few studies on this problem while a lot of researches on the support systems have been carried out. In addition, when tunneling is performed below the groundwater level, the groundwater flows into the tunnel so that the seepage forces generated on the tunnel face might give rise to a serious potential for the face instability. In this study, the face stability was evaluated by simultaneously considering two factors: one is the effective stress calculated by upper bound theorem; the other is the seepage forces acting on the tunnel face obtained by numerical analysis under the condition of steady-state groundwater flow. Tunneling in difficult geological conditions often requires auxiliary techniques to guarantee safe tunnel excavations and/or to prevent damage to structures and services around the tunnel. The steel pipe-reinforced multistep grouting has been recently applied to tunnel sites in Korea. Face stability of a tunnel with the steel pipe-reinforced multistep grouting was also analyzed in this study.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.137-146
• /
• 2017

For the competitive business environment under purchase dependence, this paper proposes a new approximate calculation of order fill rate which is a probability of satisfying a customer order immediately using the existing inventory. Purchase dependence is different to demand dependence. Purchase dependence treats the purchase behavior of customers, while demand dependence considers demand correlation between items, between regions, or over time. Purchase dependence can be observed in such areas as marketing, manufacturing systems, and distribution systems. Traditional computational methods have a difficulty of the curse of dimensionality for the large cases, when deriving the stationary joint distribution which is utilized to calculate the order fill rate. In order to escape the curse of dimensionality and protect the solution from diverging for the large cases, we develop a greedy iterative search algorithm based on the Gauss-Seidel method. We show that the greedy iterative search algorithm is a dependable algorithm to derive the stationary joint distribution of on-hand inventories in the retailer system by conducting a comparison analysis of a greedy iterative search algorithm with the simulation. In addition, we present some managerial insights such as : (1) The upper bound of order fill rate can be calculated by the one-item pure system, while the lower bound can be provided by the pure system that consists of all items; (2) As the degree of purchase dependence declines while other conditions remain same, it is observed that the difference between the lower and upper bounds reduces, the order fill rate increases, and the order fill rate gets closer to the upper bound.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.85-96
• /
• 2004

The ultimate bearing capacity of surface foundations on a sand layer overlying clay has been theoretically investigated. First, a review of previous studies on the bearing capacity problems for this type of foundation was performed and a discussion was presented concerning the practical application. Second, the kinematic approach of limit analysis was used to calculate the upper bound of the true ultimate bearing capacity. The kinematic solutions are upper bounds and their accuracy depends primarily on the nature of the assumed failure mechanism. This approach makes it convenient to create design charts, and it is possible to trace the influence of parameters. Third, the commercial finite element program ABAQUS was applied to obtain the ultimate bearing capacity based on the elasto-plastic theory. Results obtained from the kinematic approach were compared with those from the program ABAQUS and the limit equilibrium equations proposed by Yamaguchi, Meyerhof and Okamura et al. Finally, the validities of the results from the kinematic approach, the results from the program ABAQUS and the limit equilibrium equations were examined.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.21-27
• /
• 2017

In this research, we study the outage probability for distributed space-time coding-based cooperative (DSTC) systems with amplify-and-forward relaying over Rayleigh fading channels with a high temporal correlation where the direct link between the source and the destination is available. In particular, we derive the upper and lower bounds of the outage probability as well as their corresponding asymptotic expressions. In addition, using only the average channel powers for the source-to-relay and relay-to-destination links, we propose an efficient power allocation scheme between the source and the relay to minimize the asymptotic upper bound of the outage probability. Through a numerical investigation, we verify the analytical expressions as well as the effectiveness of the proposed efficient power allocation. The numerical results show that the lower and upper bounds tightly correspond to the exact outage probability, and the proposed efficient power allocation scheme provides an outage probability similar to that of the optimal power allocation scheme that minimizes the exact outage probability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.93-100
• /
• 2002

Vertical reinforcement of soft soils using the deep mixing method has received increasing applications. In this study, the theory of elasticity and plasticity including the upper bound theorem of limit analysis were used to derive the equations for obtaining composite elastic properties and shear strength parameters. The developed equations were validated using the finite element computer program SAGE CRISP. The analysis involved 4 different cases-two different type of soil and replacement ratios. Tile results of the analysis show that the proposed equations could determine the properties of composite material for practical applications.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.28 no.1
• /
• pp.22-32
• /
• 2024

In this paper we present a method of conic section approximation by hexic Bézier curves. The hexic Bézier approximants are G³ Hermite interpolations of conic sections. We show that there exists at least one hexic Bézier approximant for each weight of the conic section The hexic Bézier approximant depends one parameter and it can be obtained by solving a quartic polynomial, which is solvable algebraically. We present the explicit upper bound of the Hausdorff distance between the conic section and the hexic Bézier approximant. We also prove that our approximation method has the maximal order of approximation. The numerical examples for conic section approximation by hexic Bézier curves are given and illustrate our assertions.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2012

In this paper, we evaluate and analyze representative estimation methods for the sparse channel. In order to evaluate error performance of matching pursuit(MP) and minimum mean square error(MMSE) algorithm, lower bound of MMSE is determined by Cramer-Rao bound and compared with upper bound of MP. Based on analysis of those bounds, mean square error of MP which is effective in the estimation of sparse channel can be larger than that of MMSE according to the number of estimated tap and signal-to-noise ratio. Simulation results show that the performances of both algorithm are reversed on the sparse channel with Rayleigh fading according to signal-to-noise ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.456-461
• /
• 1998

This paper presents the results from a combination of strut-and-tie model and analytical study that investigated the ultimate strength of wall system with frame supports. Strut-and-tie models show reasonable force flows and upper bound solution is compared to the results from FEM analysis. The results shows that two main parameters - transfer girder depth and column width - yield good estimation of the ultimate strength of the system. Vertical and horizontal reinforcements of the transfer girder add few strength to the whole system. The proposed design strength formula shows good agreement with the results from FEM analysis.