• Journal of Chest Surgery
• /
• v.29 no.5
• /
• pp.585-588
• /
• 1996

We experienced a case of upper esophageal leiomyoma successfully excised by thoracoscopic surgery. A 29-year-old male was presented with retrosternal discomfort and mild dysphagia and an esophagogram revealed smooth fElling defect In the upper third of the intrathor cic esophagus, and esophagoscopy showed a submucosal tumor without mucosal infiltration. Chest CT and MRI were performed to confirm size, character and location of the esophageal mass, the absence of infiltration of surrounding structures, and to define mediastinal Iymphadenopathy. The tumor was excised by thoracoscopic surgery and it was diagnosed as leiomyoma (4$\times$2xlcm in size). The postoperative course was uneventful.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.6 no.1
• /
• pp.27-33
• /
• 1979

The author studied the response to the stimulation of an electric pulp stimulator of healthy 854 permanent anterior teeth in 122 children aged from six to eleven years old, during different stages of tooth development. The results were as followings: 1) In completely open apices, 13.1% (18 teeth) showed positive responses, and 86.9% (120 teeth) showed negative responses. In two-thirds open apices 33.1% (75 teeth) showed positive responses, and 66.9% (152 teeth) showed negative responses. In one-third open apices 57.8% (118 teeth) showed positive responses, and 42.2% (86 teeth) showed negative responses. In closed apices 80.0% (228 teeth) showed positive responses, and 20.0% (57 teeth) showed negative responses. 2) The number of positive responses increased in each upper and lower central incisors during the stages of root development, but not in upper lateral incisors. 3) There were no significant differences statistically in responses between the teeth of the right and left sides and the upper and the lower jaw, in the same stages of root development.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1261-1266
• /
• 2012

Introduction: HPV has been found repeatedly in esophageal squamous cell carcinoma (ESCC) tissues. However, reported detection rates of HPV DNA in these tumors have varied markedly. Differences in detection methods, sample types, and geographic regions of sample origin have been suggested as potential causes of variation. We have reported that infection of HPV DNA in ESCC tumors depends on anatomical sites of esophagus of the patients from Mazandaran, north of Iran. Materials and Methods: HPV DNA was examined in 46 upper, 69 middle and 62 lower third anatomical sites of esophageal squamous cell carcinoma specimens collected from Mazandaran province in north Iran, near the Caspian Littoral as a region with high incidence of ESCC. HPV L1 DNA was detected using Qualitative Real time PCR and MY09/MY11 primers. Results: 28.3% of upper, 29% of middle and 25.8% of lower third of ESCC samples were positive for HPV DNA. 13.6% for males and 14.1% for females were HPV positive in all samples. Conclusions: HPV infection is about one third of ESCC in this area. Findings in this study increase the possibility that HPV is involved in esophageal carcinogenesis. Further investigation with a larger sample size is necessary.

• Journal of Chest Surgery
• /
• v.16 no.3
• /
• pp.362-367
• /
• 1983

Pulmonary arteriovenous fistula is a congenital malformation resulting from errant capillary development, with incomplete formation or disintegration of the vascular septa that normally divide the primitive connections between the venous and arterial plexuses. It generally occurs as part of the disorder known as hereditary hemorrhagic telangiectasia [Rendu-Osler-Weber disease]. The hereditary lesion is transmitted as a simple non-sex-linked dominant trait. It may be single or multiple, too small to see on plain chest films or large and easily recognized. One third of the lesions are multiple on plain chest film. The pathogenesis of its symptoms is that unoxygenated, desaturated arterial blood enters into the pulmonary venous system, directly. Recently we have experienced a case of the pulmonary arteriovenous fistula in 26 years old male soldier, which was confirmed by pulmonary angiography preoperatively. 2 thumb-tip sized, well circumscribed cystic masses filled with bright red colored blood were seen in subpleural and anterolateral portion of the right upper lobe. Right upper Iobectomy was performed due to close approximation of the fistula with pulmonary vein. Microscopically, it shows angiomatous dilatation of the abnormal vessels embedding in the parenchyma. Postoperative physiologic studies show nearly normal arterial oxygen saturation, hemoglobin and RBC count. There was good, uneventful postoperative course.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.696-701
• /
• 2017

This paper proposes an improved de-interlacing method that converts interlaced images into progressive images from one field. First, it calculates inter-pixel values applying third-order spline interpolation for the horizontal direction from four upper lower pixel values of missing pixels. From inter-pixel values obtained from spline interpolation and upper lower pixels with value, the proposed method makes an accurate estimate of the direction by applying the correlation between upper and lower pixels. The correlation between upper and lower pixels is calculated in nine directions of a missing pixel by using values obtained from spline interpolation and pixels with value. The direction of an edge is determined as the direction in which the correlation between upper and lower pixels is at its minimum. Thus, a missing pixel is calculated by taking the average of upper lower pixels obtained from the predicted direction of an edge. From the simulation results, there are problems in that it takes a bit more time for processing, but it is expected that the time problem will be improved by increasing CPU processing speed. As for image quality, it is shown that the proposed method improves both subjective and objective image quality and quantitatively improves picture signal-to-noise ratio (PSNR) in the range between 0.1 dB to 0.5 dB, as compared with previously presented de-interlacing methods.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.705-706
• /
• 2008

When heat generated inside a large factory building is not discharged due to a stagnant flow, the working environment of workers becomes worse and the cooling of high-temperature products such as hot-rolling coils is delayed. To investigate the natural ventilation inside a large factory building, experimental studies were carried out using wind-tunnel tests. The scale-down factory building models were placed in an atmospheric boundary layer (ABL) and the mean and fluctuating velocity fields were measured using a particle image velocimetry (PIV) technique. For the prototype factory model, the outdoor air is only entrained into the factory building through the one-third open windward wall, and stagnant flow is formed in the rear part of the target area. In order to improve the indoor ventilation environment of the factory building, three different louver-type ventilators were attached at the upper one-third open windward wall of the factory model. Among the three louver ventilators tested in this study, the ventilator model #3 with the outer louver (${\theta}_o$ = 90$^{\circ}$) and the inner louver (${\theta}_i$ = -70$^{\circ}$) was found to improve the natural ventilation inside the factory building model effectively. The flow rate of the entrained air was increased with aligning the outer louver blades with the oncoming wind and guiding the entrained air down to the ground surface with elongated inner louver blades.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.921-926
• /
• 2014

The aim of this study is to develop upper bodice pattern for obese girls aged 10~12 by using 3D virtual garment simulation system. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. The results of this study are as follows: First, by using 3D virtual garment simulation, new upper bodice pattern considered obese-schoolgirls was development. The basic numerical formula were as follows ; bust girth B/2+4.5, armhole depth B/4-1, waist girth W/4+0.5+dart amount, front chest width B/6+2, back width B/6+2, neck width B/12-0.5 and neck depth B/12+0.5. Second, armhole darts were added to compensate the loose amount of front armhole and dart manipulation was used to ensure a better appearance on armhole in the design. The dart side line was modified concavely to help cover the protruding stomach. Curved lines on the armhole were significantly relieved using dart manipulation and the darts side line was modified concavely to reduce the tightness around the front waist darts. Third, according to the results of the new upper bodice pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new upper bodice pattern was appropriate for the obese-schoolgirls. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns.

• Journal of the Korean Geographical Society
• /
• v.44 no.3
• /
• pp.224-239
• /
• 2009

This study analyzes the properties of fluvial landforms in the upper and lower reaches and investigates the evolutions of stream and fluvial terrace in the Odae river basin. The lower basin of the river that consist of sedimentary rocks resistant to weathering and erosion processes shows higher altitude, relief and slope than the upper basin that consist of granite less resistant to weathering and erosion processes. The average width of river valley at the lower reaches is one-third to the upper reaches and the average width of river channel at the lower reaches is narrower than at the upper reaches. Based on the OSL age dating, the fluvial terrace T1 formed at the temperature-rising period during the late MIS 2 and T2 formed at the middle MIS 3, interstadial period during the last glacial period. Based on the these results, the average incision rates of Odae river are calculated as 0.205m/ka and 0.269m/ka at the upper granite area and lower sedimentary rocks area, respectively.

• International Journal of Railway
• /
• v.1 no.3
• /
• pp.99-105
• /
• 2008

Flow around an ICE2 high-speed train exiting a tunnel under the influence of a wind gust has been studied using numerical technique called detached eddy simulation. A wind gust boundary condition was derived to approximate previous experimental observations. The body of the train includes most important details including bogies, plugs, inter-car gaps and rotating wheels on the rail. The maximal yawing and rolling moments which possibly can cause a derailment or overturning were found to occur when approximately one third and one half of the train, respectively, has left the tunnel. These are explained by development of a strong vortex trailing along the upper leeward edge of the train. All aerodynamic forces and moments were monitored during the simulation and the underlying flow structures and mechanisms are explained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.674-696
• /
• 1997

There're many cases that should be reconstructed with post and core when clinical crown is destructed. But this post and core restoration may cause damaging stress on the teeth. Previous finite element study was restricted to normal bone model relatively close to cemen-toenamel junction. Moreover, the test of a model with diminished bone support was rare. The purpose of this study is to test the effects of alveolar bone loss on the magnitude, stress distribution and displacement of post reconstructed teeth. In this study, it was assumed that the coronal portion of upper incisor was severely destructed. After conventional endodontic treatment, it was restored with post and core. The PFM restoration was made on it. This crown was cemented with ZPC. Alveolar bone was classified by 4 types of bone, such as normal, 2 mm, 4 mm, 6 mm bone, according to the bone loss. Meanwhile, the material of post are divided into 2 types of materials, such as gold, co-cr. Force was applied to two directions. One was fuctional maximum bite force (300 N) applied to the spot just lingual to the incisal edge with the angle of 45 degree to the long axis of the tooth, and the other one was horizontal force (300 N) applied to the labial surface. The results analyzed with three dimensional finite element method were as follows : 1. Stress was concentrated on the adjacent dentin of the post apex, one third portion of the post apex and the labial & lingual mid-portion of the root in all case. The stress of middle third of the root was apparently concentrated on the labial aspect. 2. The stress on adjacent dentin of the post apex and one third of the post apex increased as alveolar bone height moved apically. This increase was dramatic beyond 4 mm bone loss model. 3. The stress of the post apex was spreaded to the middle third of the post and greater than gold post in the case of metal post. 4. The displacement of the neck of post was the greatest in one of the post-cement interface and this increased as alveolar bone height moved apically. Besides the displacement of the metal post is slightly lower than one of the gold post.