• Journal of Nutrition and Health
• /
• 제8권4호
• /
• pp.9-14
• /
• 1975

Growth retardation and a variable degree of body disproportion are recognized features of malnutrition, and mild and moderate protein-calorie malnutrition(PCM). Among the various body measurements suggested to assess the prevalence of all grades of PCM as judged by growth retardation and by body disproportion, the 'mid-upper-arm circumference'-abbreviated to 'arm-circumference' has been suggested as a potential useful simple field index for the assessment of PCM showing that the measurement would give composite information simultaneously on three important effects on PCM-deficit in the muscle protein reservoirs, availability of calorie stores in the form of subcutaneous fat, and growth failure. And this is selected because of its easy accessibility, and less involvement with clinical edema. This study is conducted to make a comparison between the percentage of Korean weight for age standards and the percentage of mid-upper-arm circumference for age standards of 175 preschool children aged $3{\sim}72$ months who are selected among the low-income residents in Seoul. In this study, a comparison is made between the results obtained by expressing the observed weight of the child as a percentage of Korean standard, referred to as 'weight-for-age' and the observed arm-circumference expressed as a percentage of the age-specific arm standard of Jelliffe, referred to as 'arm-for-age'. All the measurements were taken following the techniques described by Jelliffe. The left mid upper arm was measured using a glass-fibre tape and the Fairbanks Morse beam balance was used for weighing. 80% level of weight for age Korean standard and 85% level of arm for are Jelliffe standard were used as an upper borderline limit for PCM. Comparing the 80% weight-for-age and the 85% arm-for-age standard as an upper limit for PCM, for children aged $3{\sim}72$ months, results in 84.6% agreement with the sensitivity of 86.4% and its specificity of 83.5%. If arm circumference alone had been measured and judgement made on this basis, then only 5.1% of the children would have been 'wrongly' classified. And there is a moderately close correlation between arm circumference and weight for age as the data in Table 4 shows. The problem therefore lies in the standard for arm circumference in normal children and in determining what is the lower limit of normal. Once this is clearly difined, one can rely more confidently on arm circumference measurements alone for the nutritional assessment of early childhood.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.116-122
• /
• 2016

Recently, the production cycle in manufacturing process has been getting shorter and different types of product have been produced in the same process line. In this case, the control chart using coefficient of variation would be applicable to the process. The theory that random variables are located in the three times distance of the deviation from mean value is applicable to the control chart that monitor the process in the manufacturing line, when the data of process are changed by the type of normal distribution. It is possible to apply to the control chart of coefficient of variation too. ${\bar{x}}$, s estimates that taken in the coefficient of variation have just used all of the data, but the upper control limit, center line and lower control limit have been settled by the effect of abnormal values, so this control chart could be in trouble of detection ability of the assignable value. The purpose of this study was to present the robust control chart than coefficient of variation control chart in the normal process. To perform this research, the location parameter, ${\bar{x_{\alpha}}}$, $s_{\alpha}$ were used. The robust control chart was named Tim-CV control chart. The result of simulation were summarized as follows; First, P values, the probability to get away from control limit, in Trim-CV control chart were larger than CV control chart in the normal process. Second, ARL values, average run length, in Trim-CV control chart were smaller than CV control chart in the normal process. Particularly, the difference of performance of two control charts was so sure when the change of the process was getting to bigger. Therefore, the Trim-CV control chart proposed in this paper would be more efficient tool than CV control chart in small quantity batch production.

• 천문학회지
• /
• 제22권1호
• /
• pp.25-30
• /
• 1989

We report a null detection of $^{12}CO$ emission from a sub-condensation in a High Velocity Cloud (HVC). As a consequence of this, an upper limit of $n(H_2)\frac{X(CO)}{DV/DR}{\leq}2{\times}10^{-5}$ was set. This implies that $^{12}CO$ abundance is deficient by at least a factor of 10 if the HVC is predominantly molecular, otherwise the CO abundance of the HVC might be normal.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제39권2호
• /
• pp.167-177
• /
• 2000

In this thesis we concerned with the degree of similarity in pairs of scores having a common mean and variance could express similarity in terms of the absolute difference between the standardized scores. We particulary discussed the distribution of absolute differences between pairs of T scores among many standardized scores and demonstrated the procedures for calculating the lower limit of Med(│d│) values i. e. the maximum possible similarity with medians and correlation coefficients of the equivalent form tests by using the folded normal distribution, although other researchers expressed the degree of similarity using only the standard normal distribution. We also described many cases how to use those techniques and to apply effectively them in real evaluation fields.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.766-775
• /
• 2015

The integrity assessment of reactor vessel internals should be conducted in the design process to secure the safety of nuclear power plants. Various loads such as self-weight, seismic load, flow-induced load, and preload are applied to the internals. Therefore, the American Society of Mechanical Engineers (ASME) Code, Section III, defines the stress limit for reactor vessel internals. The present study focused on structural response analyses of the upper guide structure upper flange. The distributions of the stress intensity in the flange body were analyzed under various design load cases during normal operation. The allowable stress intensities along the expected sections of stress concentration were derived from the results of the finite element analysis for evaluating the structural integrity of the flange design. Furthermore, seismic analyses of the upper flange were performed to identify dynamic behavior with respect to the seismic and impact input. The mode superposition and full transient methods were used to perform time-history analyses, and the displacement at the lower end of the flange was obtained. The effect of the damping ratio on the response of the flange was also evaluated, and the acceleration was obtained. The results of elastic and seismic analyses in this study will be used as basic information to judge whether a flange design meets the acceptance criteria.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1726-1746
• /
• 2022

This paper presents fracture mechanics analysis results for various cracks located at pressurized water reactor pressure vessel nozzle crotch corners taking into consideration constraint effect. Technical documents such as the ASME B&PV Code, Sec.XI were reviewed and then a fracture mechanics analysis procedure was proposed for structural integrity assessment of various nozzle crotch corner cracks under normal operation conditions considering the constraint effect. Linear elastic fracture mechanics analysis was performed by conducting finite element analysis with the proposed analysis procedure. Based on the evaluation results, elastic-plastic fracture mechanics analysis taking into account the constraint effect was performed only for the axial surface crack of the reactor pressure vessel outlet nozzle with cladding. The fracture mechanics analysis result shows that only the axial surface crack in the reactor pressure vessel outlet nozzle has the stress intensity factor exceeding the low bound of upper-shelf fracture toughness irrespectively of considering the constraint effect. It is confirmed that the J-integral for the axial crack of the outlet nozzle does not exceed the ductile crack initiation toughness. Hence, it can be ensured that the structural integrity of all the cracks is maintained during the normal operation.

• 치과방사선
• /
• 제8권1호
• /
• pp.17-21
• /
• 1978

The study was to analyze on the hard and soft tissue profiles in mixed dentition. The subject consisted of 100 males and 100 females from 9 to 12 years of age and with a normal occlusion and acceptable profiles. On the basis of SnH line and SnV line, the author traced all the cephalograms and calculated the mean value and standard deviation in each measuring category and evaluated the sexual difference, the proper limit of development. The obtained results were as follows; 1. Individual variations of the lower facial part were larger the upper facial part in depth and height. 2. Sexual difference of lower facial part was significant in depth and height. 3. All the measured values to the SnH and SnV line were larger in male than in female but revealed resemblance in the profilogram. 4. The measured values of the region of nose, upper lip and point A showed stable tendency.

• Communications for Statistical Applications and Methods
• /
• 제24권5호
• /
• pp.481-492
• /
• 2017

This paper investigates a convergence rate of a test statistics given by two scale sampling method based on $A\ddot{i}t$-Sahalia and Jacod (Annals of Statistics, 37, 184-222, 2009). This statistics tests for longitudinal data having the existence of long memory dependence driven by fractional Brownian motion with Hurst parameter $H{\in}(1/2,\;1)$. We obtain an upper bound in the Kolmogorov distance for normal approximation of this test statistic. As a main tool for our works, the recent results in Nourdin and Peccati (Probability Theory and Related Fields, 145, 75-118, 2009; Annals of Probability, 37, 2231-2261, 2009) will be used. These results are obtained by employing techniques based on the combination between Malliavin calculus and Stein's method for normal approximation.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.253-263
• /
• 2024

Slope stability is generally paid more attention to in slope protection works, especially for slope containing weak layers. Two indexes of safety factor and failure model are selected to perform slope stability. Moreover, the finite element limit analysis method comprehensively combines the advantage of the limit analysis method and the finite element method obtaining the upper and lower bounds of the safety factor and the failure mode under the slope stability limit state. In this study, taking a waste dump containing a weak layer as an engineering background, the finite element limit analysis method is adopted to explore the potential failure mode. Meanwhile, the sensitivity analysis of slope stability is performed on geometrical and geotechnical parameters of the waste dump. The results show that the failure mode of the waste dump slope is two wedges if the weak layer is located on the ground surface (Model A), while the slope can be observed as three wedges failure if the weak layer is below the ground surface (Model B). In addition, both failure modes are highly sensitive to the friction angle of the weak layer and the shear strength of waste disposal, and moderately sensitive to the heap height, the dip angle and cohesion of the weak layer, while the toe cutting has limited effect on the slope stability. Moreover, the sensitivity to the excavation of the ground depends on the location of the weak layer and failure mode.

• 천문학회보
• /
• 제46권1호
• /
• pp.55.2-56
• /
• 2021

The progenitor of Type Ia supernovae (SNe Ia) is mainly believed to be a close binary system of acarbon-oxygen white dwarf (CO WD) and non-degenerate companion (single degenerate) or another WD (double degenerate). However, it is unclear which system is more prevalent. Here, we present a high cadence optical/Near-IR light curve of normal but slightly faint type Ia SN 2019ein from IMSNG project. We fit the early light curve (t <+8.3 days from the first detection) with various models to find the shock-heated cooling emission from SN ejecta-companion interaction. No significant shock-heated cooling emission is found, from which we constrain the progenitor star size as the following. The upper limit (R_upper,*) of the companion size in R-band is ~0.2R_⊙ when forcing the first light time (t_fl) to have one value and ~0.9R_⊙ when using the mean value of tfl from the fitting in each band. Assuming the source of the I-band curve is almost powered from the radioactive decay, we obtained R_upper,*~1.2R_⊙. The early B-V color curve is in agreement with the model color curve of the 2M_⊙ main sequence companion. These results allow us to at least rule out large stars like red giants as a companion star of the binary progenitor system of this supernova. B-R and V-R color do not show any significant signs of a red bump, which shows a thin helium shell (MHe<0.1M_⊙) for the sub-Mch WD (double detonation model). In addition, we estimated the distance to NGC 5353 as 37.098±0.028Mpc.