• 복식문화연구
• /
• 제23권5호
• /
• pp.755-767
• /
• 2015

This study analyzed the body-type characteristics of 340 old-aged obese women that had been on the rise as a part of efforts to activate the silver clothing industry. The subjects were in the age range of 60-79 and met some obesity requirements, including a Rohrer Index of 1.6 or higher, a BMI of 25 or higher, and a WHR of 0.85 or higher. Old-aged obese women showed increased thickness of the torso with age, which suggests that they revealed the characteristics of regardless of gender. In other words, they became bigger in the waist and abdomen, shorter in height, slimmer in the lower body, and thicker in the torso. There are three types of obesity: Type 1 is lower-body obesity with a higher degree of obesity in the abdomen than the upper body. Type 2 is abdominal obesity with a higher degree of obesity in the upper body than in the lower body. Type 3 is whole-body obesity with balanced obesity of the whole body. As for changes to the types of obesity according to age, those who are in their sixties usually fall into the categories of upper-body and whole-body obesity, and those who are in their seventies are much more concentrated in the categories of abdominal obesity and upper-body obesity with a decreased percentage of whole-body obesity. It is apparent that the percentage of abdominal and upper-body obesity rises with age due to fat accumulation in the abdomen.

• 복식
• /
• 제54권1호
• /
• pp.69-81
• /
• 2004

The purpose of this study was to find out apparel fit satisfaction according to item(jacket, pants, skirt) by body perception and body satisfaction. This research was done by a survey method. Descriptive Statistics, Pearson's Correlation, Crosstabs were used for data analysis. The results of this study are as follows. 1) Correlation between body perception and body satisfaction : The subjects were less satisfied with larger or thicker girth of upper body. The subjects were less satisfied with thicker upper arm, lower arm, waist and lower abdomen. The subjects were more satisfied with taller height. The subjects were less satisfied with larger or thicker girth of lower body. The subjects were less satisfied with thicker hips. thighs, calves, ankles, and longer crotch length. However, they were more satisfied with longer legs. 2) Apparel fit by body perception and body satisfaction: The subjects who were less satisfied with thicker upper arm, waist, thighs and wider hips were less satisfied with the upper arm area, waist area. hip area of jacket. The subjects who were more satisfied with longer arms were more satisfied with the sleeve length of jacket. The subjects who were less satisfied with wider shoulder width were less satisfied with the upper back width of jacket. It means the shoulder width affected more the upper back width of jacket than shoulder width of jacket. The subjects who were less satisfied with wider hips were less satisfied with the hip area of pants and skirt. The subjects who were less satisfied with thicker thighs were less satisfied with the thigh area and the hip area of pants and skirt. The subjects who were less satisfied with longer crotch length were less satisfied with the crotch length of pants. 3) Difference between actual body and perceived body by Rohrer Index: Rohrer Index 109 calculated by average of the ideal height(165.83cm) and weight(49.78kg) of the subjects ranged in thin body type(below 120). The subjects tended to perceived their bodies fatter than their actual bodies. Also, the subjects tended to perceived their lower bodies fatter than upper bodies.

• 복식
• /
• 제42권
• /
• pp.163-172
• /
• 1999

The purpose of this study is to classify the types of torso of adult females using the tight fitting technique and pattern development figure. The subjects are 106 females of 19 to 24 years old. 59 different items are measured from body surface development and analyzed by factor analysis and cluster analysis. The results are as follows; 1. Eight somatotype factors are obtained through factor analysis and orthogonal rotation by the method of Varimax Factor 1 is the length of upper body factor 2 the length of lower body factor 3 the circumference and width of the back of upper body factor 4 the circumference and width of front torso factor 5 the dart type of the back of upper body factor 6 the size of the back neck factor 7 the type of the front shoulder and factor 8 the size of the back arm hole. 2. As a result of cluster analysis the somatotype of torso is classified into 5 types. Type 1 is normal in length circumference and width of upper body. Type 2 is shortest length circumference and width of torso. Type 3 is long in length circumference and width of torso. Type 4 is normal length and short in circumference and width especially short in bust circumference. Type 5 is longest in length circumference and width of torso.

• 한국의류학회지
• /
• 제19권5호
• /
• pp.842-852
• /
• 1995

The purpose of this study was to provide fundamental data of characterizing for age group of obese women's body shape. The subjects were 132 obese women, age of 20~59. The criteria of obestity based on Vervaeck index ($\geq$92.3), Rohrer index ($\geq$ 1.6), and bust girth ($\geq$90 cm). Thirty eight measurement items were used for F-test. Forty two transformed variables (including 4 additional variables) were used for cluster analysis The results were as follows: 1. Characteristics for age group were described that 20's was narrow shoulder, flesh contoured shape in upper body. 30's was rounded upper back, 40's was the slightest fatty shape, and 50's was the fattest round shape among four age groups. 2. Four types of obese women's body shape were classified by cluster analysis. Body shape of type 1 was fatty abdomen, and rounded upper back in 50's mainly. Body shape of type 2 was slightly fatty. Body shape of type 3 was round shape. Body shape of type 4 was the smallest girth in the obese women in 40's mainly.

• 한국의류산업학회지
• /
• 제8권1호
• /
• pp.107-112
• /
• 2006

This study is done to classify the upper body shapes for late elementary schoolgirls. The sampling was done for 11~12 years-old-girls resident in Busan and Kyungnam. Based on the somatometric charateristics of them, 33 anthropometic and 7 photogrphic measurment data were acquired from every girl. These data are statistically analyzed with the following methods; Factor Analysis, Cluster Analysis, and Discriminant Analysis. Resulting from the factor analysis, it is shown that 79.95% of the whole variances can be explained with 8 factors. Through the cluster analysis, 3 types of upper body shapes can be categorized as follows: Type I has average horizontal size, big vertical size and lots of protruded chest ; Type III has big horizontal size, the mean vertical size, and big upper angle of the back ; Type II has small horizontal and vertical size and long surface length of the upper body. Through the discriminant analysis, the high discriminative items in discriminant function are follows: Upper chest circumference, arm length and waist front length of discriminant function I and waist depth, front length, back breadth, nipple to nipple breadth and upper chest circumference of discriminant function II have large coefficient values.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.135-151
• /
• 2007

This study is human body measurement of 200 adult males in their 20s by both direct and indirect methods in order to reveal the representative male upper body types. Composition factors of body types were classified while the combination of direct-indirect measurement values was chosen. The following are the findings: 1) The analysis of direct-indirect measurement statistics showed the following results: 173.80cm (height), 69.87kg (weight), 95.58cm (chest girth), $24.67^{\circ}$ (right shoulder angle), and $9.34^{\circ}$ (shoulder width angle). 2) The factor analysis of the body types by direct measurement produced 5 factors: 1 (front length of upper body), 2 (front length of upper body), 3 (back length of upper body), 4 (circumference of upper body), and 5 (shoulders length). These factors accounted for 90.08%. Also, the cluster analysis of factor scores led to 3 types: 1 (33%, short, comparatively wide shoulders and full in the hips), 2 (25.1%, well-developed upper body in tall, inversed triangle), 3 (41%, average height, short upper body). 3) The body-type factor analysis by indirect measurement resulted in 6 factors with the explanation of 83.24%: 1 (rear upper bady thickness), 2 (front upper body width), 3 (front chest thickness), 4 (left-right shoulder angle), 5 (front width of protrusion distance in chest and shoulders), and 6 (neck's front-rear side angle).In addition, the cluster analysis of factor scores brought about 4 types: 1 (15%, well-developed front chest, beardless waist), 2 (23.5%, flat chest, with shoulder, drooping shoulders, strait neck), 3 (39%, with shoulder, curved back), and 4 (22.5%, narrow and thin, curved waist). 4) Among the 118 subjects (75%), 58 subjects commonly appearing in indirect measurement values group and direct measurement values group were chosen the representative body type group according to asterisk indexes. They had the highest frequency in direct type 3 and indirect type 3, whose combination represented the physical characteristics of the representative body types.

• 한국생활과학회지
• /
• 제12권5호
• /
• pp.787-795
• /
• 2003

This research studied several somatotypes for children's upper bodies in order to suggest the basic data of bodice patterns of children's clothing. By extracting the component factors from the children's bodices, they were classified into several somatotypes to recognize an individual body type. Three hundred and fifty eight children's wears were estimated as research objects to analyze their somatotypes for the 44 items representing upper bodies through anthropometric measurement and photometric measurement. The results are as follows : 1. Seven factors were extracted as a result of factor analysis. 2. Data were classified into three types as a result of cluster analysis : Type 1 was characterized as low fat body, small skeleton size, and forward belly ; type 2 as high fat body, normal hight, backward shoulder, and the lowered shoulders ; type 3 as medium fat body, tall height, somewhat crouching back, and the rising shoulders. 3. As a results of the discrimination analysis for the three types, the highly discriminated items were height, width of bosom, front center length. weight, width of waist or the length of waist. One could discriminate one's own body type by obtaining the classification function from these five items.

• International Journal of Costume and Fashion
• /
• 제3권
• /
• pp.13-24
• /
• 2003

The purpose of this study was to examine the changes brought by the upper body form using a three-dimensional human body measurement the gypsum method. The developed plane figure was constructed using paper replica to analyze the dimensional shape of the upper torso and to be able to design clothes suitable for elderly women's physical characteristics. The characteristics are analyzed and compared with existing patterns in order to extract the components for the pattern design. The examination was carried out based on the developed plane figures of upper body surface replicas. Type 1, the bent-forward body form, has a wide gap on the shoulder. In Type 2, the gap of waist line was wide at angulus scapulae point. Type 3 was the thin body form, and the girth of the chest, front interscye breadth and back interscye breadth were more level with one another, compared to the other types. In Type 4, the bent-backward body form, there was a wide gap on front shoulder. Comparison with the developed plane figure and existed pattern, items revealed differences in significance included the front and back interscye width between the measured values of the existed patterns and the developed plane figure. Therefore, the basic components of basic bodice pattern for old women were determined in the up-bust circumference and length of the back.

• 대한가정학회지
• /
• 제41권5호
• /
• pp.89-97
• /
• 2003

Fitness of clothes becomes a major concern in apparel industry. But high-school boys had difficulties to buy ready-made clothes of good fit. To solve this problem, it is necessary to classify boys' upper body into several kinds of somatotypes. The purpose of this study was to classify upper body types of high school boys based on the analysis of their upper body types. The subjects for anthropometric measurement were 99 high school boys of 16 to 18 year-old. The result of factor analysis indicated that 5 factors were extracted from anthropometric measurements through analysis and those factors comprise 68.44% of total variance. 3 clusters were categorized using 5 factor scores by cluster analysis. Type 1 was taller than other types and was bending somatotype. Type 2 was straight somatotype and had average size. Type 3 was characterized by short and small figure and had bending somatotype.

• 패션비즈니스
• /
• 제25권4호
• /
• pp.36-60
• /
• 2021

This study aimed to provide basic data for establishing a sizing system for menswear by investigating body size changes and body shapes in adult men in their 30s to 50s. Data on 52 different upper body categories collected from 4,314 people during the 5-7th Size Korea surveys were analyzed. The waist height, hip height, torso and arm lengths, and torso and upper limb circumferences increased while the arm joint sizes decreased. According to factor analysis, factors 1 and 2 referred to 'the horizontal size of the upper body and limbs' and the 'torso height and upper limb length', respectively, while factors 3 and 4 represented 'shoulder size' and 'upper body length' respectively. In clustering analysis, types 1 and 2 were 'short and fat' and 'tall and thin,' respectively, while types 3 and 4 represented 'tallest and chubby' and 'shortest and small' respectively. Torso length increased in the 30 to 40s in type 1 while torso circumference increased in the 30s and late 40s in type 2. In type 3, shoulders got bigger in the 30s. In type 4, torso circumference increased in the early 30s, and torso length increased in the late 40s. 'Thin' was a typical body shape in the early 30s. Among early 40s men, distribution evolved from 'small' to 'thin.' In the late 40s, while the percentage of 'small' decreased, the ratio of 'obese' increased. In the 50s, 'small' was the most common.