• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.29-45
• /
• 1997

This study aims at designing sleeves which are suitable for arm shapes and arm movements. With the samples of of ordinary 24 women aged from 20 to 22, the arm shapes and movements were measured 3-dimensionally using a motion analyzer and a sonic digitizer, and then clasified into three characteristic types (A, B, and C). Our analysis leads to the following conclusion. The factors classifying arm shapes are the length from acromion to posterior armpit point, arm hole length, the cap height, difference in height between anterior and posterior armpit points, armhole circumference, upper arm circumferemce, armhole depth, and underarm circumference. The characteristics of arm type A is that the armhole depth and the length from acromion to posterior armpit point are the largest, while the circumference inbe- tween upper arm and elbow is the smallest among the three arm types. Thus, the large circumference difference between upper and lower arms is the most notable in arm type A. The factors classifying arm shapes for arm type B are the smallest except for the circumference inbetween upper arm and elbow which is larger than that for arm type A. The circumference difference betweemn upper and lower arms is small for arm type B. Arm type C has the smallest armhole depth, while other factors are similar to those for arm type B. In type C, the size of upper arm is comparatively small on the frontal plane, while it is the largest on the sagital plane.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.930-942
• /
• 1996

This study was done to provide the characteristics of body surface changes at armhole area. Experiments were carried out at upper arm and upper body inchuding 67 items, 74 segments by the stanard posture and arm movements. The subjects were 15 females of twenty aged. The major conclusions of this study are; 1. On the circumference items of upper arm, armhole circumference was decreased by all arm movement, especially high contracted on front armhole line. The most contracted segments of armhole circumference were from the shonlder point to front and back interscye breadth point. Axillary circumference was increased 5 cm to the utmost, so the function of sleeve pattern would be decided by axillary circumference. 2. The lengths of upper arm were decreased near center line, sleeve cap length was contracted 3∼4 cm. Posterior armpit point area was increased both length and breadth. According to the rates of expansion and contraction, the diagram of expansion and contraction of upper arm was suggested. 3. On upper body, back side chest breadth was increased exceedingly and shoulder length was decreased most. It was apparent that surface changes of upper body were greatly larger as far away from center front and center back line. The rates of expansion and contraction of upper body were also represented as a diagram of surface changes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.5
• /
• pp.826-841
• /
• 1995

This study is concerned with the functional utility of movement in sleeve from an ergonomic viewpoint. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are. 1. The expansion rate of upper extremity was higher in length than in circumference mesurements. The amounts of expansion were, especially high (more than 60mm) for inner arm length, axillary arm circumference, and outer arm length. Therefore, a lot of ease is necessary for these parts. On the other hand, armhole circumference, forearm circumference, and wrist circumference had low rates of expansion. The sleeve cap length was also contracted in all motions. 2. The expansion rate and the range of expansion and contraction were higher in the upper arm than in the forearm. The main points of expansion were the axillary and elbow parts. The segment of maximum expansi (rate of 44.8%) was Iii of axillary parts. As the body surface expands mainly in some segments, it is desirable to allow ease to the main segments of expansion. 3. In a basic sleeve, necessary ease was lacking in the measurements for outer arm length and axillary arm circumference, while it was too large in armhole circumference, forearm circumference, wrist circumference, and sleeve cap length. Therefore, a basic sleeve is inadequate as a functional sleeve for hard work in point of functional utility of movement. Wider application of these findings would lead to an improvement in the comfort of workers.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.1
• /
• pp.87-95
• /
• 1997

One- to three-month-old infants (n=232) were compared their upper arm cumference and skinfold thickness(triceps, subscapular) by feeding methods in cross-sectional study. There were two groups : breast-fed(BF) and formula-fed groups(FF). As reported previously, weight, length, head and chest circumferences of these infants were good, and overall growth status was not significantly different by feeding methods, but weight, weight velocity and chest circumference of formula-fed infants were higher than breast-feds at 3month, significantly. Hear, the triceps skinfold thickness of infants at 1, 2, and 3 postpartum months were 7.4, 9.5 and 10.5 mm, respectively. The triceps skinfold thickness of breast-fed infants were higher than formula-feds at 1 and 2 postpartum month, but at 3 month that of formula-fed infants was greater than breast-fed infants, insignificantly. The subscapular skinfold thickness of infants were 6.4, 9.2 and 10.6 mm at 1 to 3 postpartum months, respectively. The upper arm circumference of infants were 11.7, 13.4, 14.3cm, and the arm muscle diameter were 34.5,39.3 and 41.7cm at one to three postpartum months, respectively. The upper arm circumference of male infants was higher than females at 2, 3 postpartum months. Overall, there were no signifiant differences between feeding methods in triceps and subscapular skinfold thickness, upper arm circumference and arm muscle diameter. But 3-month-old formula-fed male infant showed bigger significantly in arm circumference than the breast-feds. From this survey, long-term survey on growth and body composition of large scales might be necessary to determine the effect of feeding methods of infants after 3 months and to set proper body composition standard for infant.

• Journal of Nutrition and Health
• /
• v.8 no.4
• /
• pp.9-14
• /
• 1975

Growth retardation and a variable degree of body disproportion are recognized features of malnutrition, and mild and moderate protein-calorie malnutrition(PCM). Among the various body measurements suggested to assess the prevalence of all grades of PCM as judged by growth retardation and by body disproportion, the 'mid-upper-arm circumference'-abbreviated to 'arm-circumference' has been suggested as a potential useful simple field index for the assessment of PCM showing that the measurement would give composite information simultaneously on three important effects on PCM-deficit in the muscle protein reservoirs, availability of calorie stores in the form of subcutaneous fat, and growth failure. And this is selected because of its easy accessibility, and less involvement with clinical edema. This study is conducted to make a comparison between the percentage of Korean weight for age standards and the percentage of mid-upper-arm circumference for age standards of 175 preschool children aged $3{\sim}72$ months who are selected among the low-income residents in Seoul. In this study, a comparison is made between the results obtained by expressing the observed weight of the child as a percentage of Korean standard, referred to as 'weight-for-age' and the observed arm-circumference expressed as a percentage of the age-specific arm standard of Jelliffe, referred to as 'arm-for-age'. All the measurements were taken following the techniques described by Jelliffe. The left mid upper arm was measured using a glass-fibre tape and the Fairbanks Morse beam balance was used for weighing. 80% level of weight for age Korean standard and 85% level of arm for are Jelliffe standard were used as an upper borderline limit for PCM. Comparing the 80% weight-for-age and the 85% arm-for-age standard as an upper limit for PCM, for children aged $3{\sim}72$ months, results in 84.6% agreement with the sensitivity of 86.4% and its specificity of 83.5%. If arm circumference alone had been measured and judgement made on this basis, then only 5.1% of the children would have been 'wrongly' classified. And there is a moderately close correlation between arm circumference and weight for age as the data in Table 4 shows. The problem therefore lies in the standard for arm circumference in normal children and in determining what is the lower limit of normal. Once this is clearly difined, one can rely more confidently on arm circumference measurements alone for the nutritional assessment of early childhood.

• Nutrition Research and Practice
• /
• v.9 no.3
• /
• pp.268-277
• /
• 2015

BACKGROUND/OBJECTIVES: Although it is crucial to identify those children likely to be treated in an appropriate nutrition rehabilitation programme and discharge them at the appropriate time, there is no golden standard for such identification. The current study examined the appropriateness of using Mid-Upper Arm Circumference for the identification, follow-up and discharge of malnourished children. We also assessed its discrepancy with the Weight-for-Height based diagnosis, the rate of recovery, and the discharge criteria of the children during nutrition rehabilitation. SUBJECTS/METHODS: The study present findings from 156 children (aged 6-59 months) attending a supplementary feeding programme at Makadara and Jericho Health Centres, Eastern District of Nairobi, Kenya. Records of age, weight, height and mid-upper arm circumference were selected at three stages of nutrition rehabilitation: admission, follow-up and discharge. The values obtained were then used to calculate z-scores as defined by WHO Anthro while estimating different diagnostic indices. RESULTS: Mid-upper arm circumference single cut-off (< 12.5 cm) was found to exhibit high values of sensitivity, specificity, positive predictive value, negative predictive value, positive likelihood ratio, negative likelihood ratio at both admission and discharge. Besides, children recorded higher rate of recovery at 86 days, an average increment of 0.98 cm at the rate of 0.14mm/day, and a weight gain of 13.49gm/day, albeit higher in female than their male counterparts. Nevertheless, children admitted on basis of low MUAC had a significantly higher MUAC gain than WH at 0.19mm/day and 0.13mm/day respectively. CONCLUSIONS: Mid-upper arm circumference can be an appropriate tool for identifying malnourished children for admission to nutrition rehabilitation programs. Our results confirm the appropriateness of this tool for monitoring recovery trends and discharging the children thereafter. In principle the tool has potential to minimize nutrition rehabilitation costs, particularly in community therapeutic centres in developing countries.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.431-442
• /
• 2008

This study was to research the characteristics of the somatotype of Korean farmers. 836 Korean farmers(Male: 361 persons, Female: 475 persons) volunteered for this study. They volunteered from 9 different area such as Kumi, Damyang, Iksan, Injae, Chungju, Choongju, Haman, Whasung, and Whasoon. The reusults were as follows: 1. The subcutaneous body fat thickness were decreased as they aged(p<.05). 2. The thicker the subcutaneous body fat thickness of Korean farmer, the wider the circumference size by the Korean famer's physical parts(p<.05-p<.001). 3. There were no significant differences in the circumference size such as upper arm, chest, bust, waist, umbilical waist, hip, and calf between Korean farmers and Korean standard size. 4. Korean women farmer showed significantly differences in the upper arm circumference(p<.01), the chest circumference(p<.01), the bust circumference(p<.01), the waist circumference(p<.01), the umbilical waist circumference(p<.01), and the calf circumference(p<.05) from Korean women standard by ages. Especially, Korean women farmer had thicker the umbilical waist circumference(the 40's: 103.2mm, the 50's 52.3mm, the 60's 22.3mm, over 70's 22.1mm) than Korean women standard. 5. The 40's women farmer had thicker the upper arm circumference, the chest circumference, the bust circumference, the waist circumference, the umbilical waist circumference, and the calf circumference than Korean women standard. The 70's women farmer had skinner circumferences except the umbilical waist circumference than Korean women standard. 6. Korean farmers showed the crooked back shape, the broad-knee length and also front-bending knee shape as they aged.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.982-996
• /
• 2010

This study classified the body shapes of Korean obese women and investigated the differences of each body shape, using 2004 Size Korea data. For selecting the obesity sample, 7 obesity judgment indices were chosen through previous clothing-related studies. A total of 636 females defined as "obese" by 5 out of 7 indices were selected as subjects and 54 body measurements and obesity judgment indices were used in this study. Firstly, mean, standard deviation, minimum, and maximum values of each measurement and item were obtained from the descriptive analysis of 53 measurements. According to the descriptive analysis, all measurements and obesity judgment indices of the subjects demonstrated a serious obesity level shown by BMI 27.11, R$\ddot{o}$hrer index 1.76, Vervaeck index 104.77, Relative weight 133.00, WHR 0.90, and waist circumference 86.71cm. In addition, the measurements and indices showed considerable differences between minimum and maximum values. Significant differences were identified in all measurements and items at a significant level, p=.001. Each distribution of body types according to age, stature, bust, and waist circumference groups was provided in this study. Secondly, factor analyses were conducted using 38 measurement items to extract the body characteristics of obese women. Factor 1 was "circumference measurements & obesity judgment indices," Factor 2 was "heights & arm-related lengths," and Factor 3 was "size and ratio of waist circumference & hip circumference." Factor 4 was "lengths in upper body," Factor 5 was "back width in upper body," Factor 6 was "side neck point to bust & bust circumference," Factor 7 was "length in lower body & arm circumferences" and Factor 8 was "neck base circumference & front width in upper body." These 8 factors explained 76.54% of the total variance. Finally, 5 body types were selected in the cluster analysis. Type 1 (with big back widths & arm circumferences) was 15.5% of the entire subjects, Type 2 (the shortest and fattest, with big upper body) was 18.8%, Type 3 (with big breast) was 27.8%, Type 4 (the tallest and longest in arm lengths, with the smallest arm circumferences and lengths in torso) was 22.5%, and Type 5 (with big hips compared to waist circumferences, smaller height and upper body) was 15.5%. Fundamental differences were identified in all measurements and items at the significant level of p=.001. In addition, each distribution of body type according to age, height, bust, and waist circumference groups was provided in this study.

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.159-179
• /
• 1993

The purpose of this study is to collect data for he improvement of the accuracy of upper garments construction of the old whose bodies have been changed due to their age. In this study the body measurements with 61 items were taken from 226 men(aged fro m 60 to 80) living in Seoul by the R. Martin's method in 1992. The data were calculate by computer and analyzed by the multivariate method, especially factor and cluster analysis. The results of the study were as follows; 1. The average stature of elderly males was 163.6cm, chest circumference 91.6cm, waist circumference 9\\85.5cm. hip circumference 92.8cm, neck circumference 37cm, arm length 55.4 cm, back length 42.6cm, shoulder breadth 42.9cm and the Roher's Index 1.39, which was a standard body shape. 2. The items of factor analysis were explained to seven, namely, the degree of fatness of the upper body, the size of the frame of body, the length of the upper body, the degree of curve of the front body, the size of shoulder, the shape of the back, and the slope of shoulder. 3. The body types of subjects were classified into four types. The majority was type 4, which was 67% of subjects and considered as balanced body type. The distinctive features of those types are as follows; Type 1. The subjects of this type had a slight skeletal structure and were the thinnest of all the subjects with thin and forward-bent arm. Type 2. The subjects of this type were the tallest of all the subjects. they had the straightest side of body and a well-developed upper arm. The thigh length of this type was longer than the length of trunk. Type. 3. The subjects of this type was only one, so ti could be excluded. Type 4. The subjects of this type had a long trunk, well-developed shoulder, and a crook in their neck and back. The arm length and thigh of this type were short and those circumferences were thick. Type 5. The subjects of this type were the shortest of all, but had the highest degree of fatness in the waist and abdominal. They had well-developed front muscles of body and projected hip.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.641-650
• /
• 2008

In this study, seven models with distinctly different body types were researched and explanatory variables were reviewed. Review was done by using body measurements and the measurements of the appropriate bodice patterns in 1D, 2D, and 3D measurement methods in order to review the pattern making system and the equations for calculating the dimensions of the sleeve caps, which are readily available. Data on human bodies, which can be the criteria for each body part required for the new system for making sleeve cap part, were selected considering conditions such as items with a significantly high contribution rate from the results of regression analysis and the easiness of measurement. As a result of research, an explanatory variable required for the system for making sleeve caps with high general use was extracted. All items with the exception of the waist circumference and upper arm circumference were about the measurement of the form of human bodies, which were newly set in this study. As a result of this study, the equations for calculating the dimensions of each part of the sleeve caps showed distinct differences in comparison to the conventional system of construction.