• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.303-315
• /
• 1999

The aim of this study was to evaluate the morphology of the mandibular symphysis and anterior alveolar and skeletal relationship under the influence of the rotational growth pattern of mandible in skeletal Class III malocclusion. A total of U untreated adult subjects were divided into two groups-forward rotational growth pattern group, backward rotational growth pattern group-according to the suggestion of Skieller et al.. The antero-posterior position, vertical relationship, mandibular symphysis and anterior alveolar and skeletal relationship were assessed on lateral cephalometric radiographs. Mandibular symphysis and anterior alveolar and skeletal relationship in each subject were studied and the following conclusions were drawn : 1. Concerning the antero-posterior position, forward rotational growth pattern group showed significantly larger SNA, SNB. Conceming the vertical relationship, all measurements showed statistically significant differences. 2. Forward rotatioal growth pattern group showed significantly larger IMPA, MnAD, backward rotational growth pattern group showed significantly larger MxABH. 3. There was no statistically significant difference in symphysis ratio to mandibular plane between forward and backward rotational growth pattern group. 4. In the correlative analysis of rotational growth pattern of mandible and mandibular symphysis, anterior alveolar and skeletal relationship, statistically significant correlations in overbite, IMPA, MnAD, symphysis width were showed.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.217-227
• /
• 1993

Preadjusted appliance, following the original concept of the Andrews Straight-Wire appliance, became increasingly common in the 1980s. In six phases of treatment, anchorage control, leveling and aligning, overbite control, overjet reduction, space closure, and finishing are very effective with using the preadjusted appliances. Space closure is the phase of treatment in which the difference between standard edgewise and preadjusted mechanics is most noticeable. Orthodontists have been able to reduce the use of closing loops and, because of the level slot lineup, enjoy the advantages of sliding mechanics. In 1990, Dr. John C. Bennett and Richard P. McLaughlin introduced the new space closure system, namely, elastic 'tiebacks'. They found an $.019'\times.025'$ working archwire most effective in an .022'-slot system. Hooks of .024' stainless steel or .028' brass wire are soldered to the upper and lower archwires. The force required for space closure is delivered by elastic 'tiebacks'. An elastic modulo stretched by 2-3mm(to twice its normal length) usually delivers 0.5-1.5mm of space closure per month. Group movement and sliding mechanics are combined for gentle, controlled space closure, so that about 0.5mm of incisor retraction and 0.5mm of mesial molar movement can be seen each month. The tiebacks are replaced every four to six weeks. By using the elastic 'tiebacks', the next two cases were treated during space closure. Even though we found some clinical problems of this mechanics, long treatment time, hard to control of vertical dimension and anchorage, the application method of this system is so simple that orthodontists can manage many patients during short chair time. But we must apply this mechanics after perfect understanding of the biomechanics in tooth movement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.674-696
• /
• 1997

There're many cases that should be reconstructed with post and core when clinical crown is destructed. But this post and core restoration may cause damaging stress on the teeth. Previous finite element study was restricted to normal bone model relatively close to cemen-toenamel junction. Moreover, the test of a model with diminished bone support was rare. The purpose of this study is to test the effects of alveolar bone loss on the magnitude, stress distribution and displacement of post reconstructed teeth. In this study, it was assumed that the coronal portion of upper incisor was severely destructed. After conventional endodontic treatment, it was restored with post and core. The PFM restoration was made on it. This crown was cemented with ZPC. Alveolar bone was classified by 4 types of bone, such as normal, 2 mm, 4 mm, 6 mm bone, according to the bone loss. Meanwhile, the material of post are divided into 2 types of materials, such as gold, co-cr. Force was applied to two directions. One was fuctional maximum bite force (300 N) applied to the spot just lingual to the incisal edge with the angle of 45 degree to the long axis of the tooth, and the other one was horizontal force (300 N) applied to the labial surface. The results analyzed with three dimensional finite element method were as follows : 1. Stress was concentrated on the adjacent dentin of the post apex, one third portion of the post apex and the labial & lingual mid-portion of the root in all case. The stress of middle third of the root was apparently concentrated on the labial aspect. 2. The stress on adjacent dentin of the post apex and one third of the post apex increased as alveolar bone height moved apically. This increase was dramatic beyond 4 mm bone loss model. 3. The stress of the post apex was spreaded to the middle third of the post and greater than gold post in the case of metal post. 4. The displacement of the neck of post was the greatest in one of the post-cement interface and this increased as alveolar bone height moved apically. Besides the displacement of the metal post is slightly lower than one of the gold post.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.13-18
• /
• 1995

Craniofacial asymmetry was analyzed in 39 patients with complete unilateral cleft lip and palate(UCLP). The samples are devided into three groups nine below 9 years, twenty three from 9 years 1 month to 14 years and seven over 14 years group. Seventeen measurements were obtained from the tracing of PA X-ray cephalometric headfilms to evaluate the asymmetric characteristics and changes accdording to aging in UCLP. The obtained results were as follows. 1. Facial asymmetry in UCLP is variable(1.22-3.47 $mm/^{\circ}$) and the length from midsagitta1 reference line to maxillary 1st molar, to upper central incisor and the length of mandibular ramus showed significant asymmetry 2. Nasal septum and anterior nasal spine were deviated In the cleft side and the lower border of nasal cavity was 1ower in cleft side. 3. The deviation of nasal septum was continued significantly till after 14 years old.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.419-435
• /
• 2003

The purpose of this study was to evaluate growth changes and skeletal characteristics of Korean children with Class III malocclusions from 10 to 14 years of skeletal age. Radiographs of 60 children with Class III malocclusion and 60 normal controls were assessed. Both groups were subdivided into 6 samples according to sex and skeletal age. Skeletal age was assessed using handwrist X-rays using the Greulich and Pyle norms. The Krogman-Walker plane (occipitale-maxillon) through Sella was used as a reference plane in this study with x-axis perpendicular to the x-axis. Sir Student t-tests were conducted to compare the control group with the Class III group according to each gender a:nd age. The characteristics of Class III malocclusion group compared to the control group included shorter anterior and posterior cranial base, shorter and retrusive maxilla, forger mandible, increased molar-incisor distance, retroclined lower incisors, labially proclined upper incisors, and anteriorly located mandibular molar, smaller upper and middle facial depth, and larger lower facial depth. Landmarks representing facial depth, size of maxilla and mandible, and their AP relationship including anterior facial height indicate that growth characteristic was determined early in life. But growth Pattern of cranial base and some of the dental landmarks showed progressive divergence between Control and Class III groups with age. The position of the posterior border of the mandible was found to be significantly forward in both females and males by the age of 14 and at the anterior border in males and females at all ages. Hyperdivergent mandibular plane, changes in anterior segment of mandible, small anterior cranial base, and decrease in cranial base flexure was also noted.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.1-9
• /
• 2003

The purpose of this study was to find out and evaluate discrepancies between preorthodontic prediction values and actual postorthodontic values and factors contributing to it in 45 patients(17 male, 28 female) who were diagnosed as skeletal Class III ma)occlusion and received presurgical orthodontic treatment and orthognathic surgery at Yonsei university dental hospital. Lateral cephalograms were analysed at pretreatment(T1), orthodontic Prediction(T2), immediately before surgery(T3) and designated the landmark as coordinates or X and Y axes. The samples were divided according to ALD, upper and lower incisor inclination(Ul to SN, IMPA), COS, extraction, the position of extracted teeth and the statistical significance was tested to find out the factors contributing to the prediction. The results were as follows: 1. Differences between preorthodontic prediction values and actual postorthodontic values(T2-T3) were statistically significant(p<0.05) in the x coordinates of U6mbc, L1x and in y coordinates of U1i, U1x, U6me, U6mbc, L6mbc 2. The accuracy of prediction is relatively higher in horizontal changes compared to vortical changes. 3. The statistical significance(p<0.05) between prediction and actual values is observed more in the landmarks of the maxilla than the mandible. 4. Differences between prediction and actual values of incisor and first molar were statistically significant(p<0.05) according to extraction vs non-extraction, extraction type, ALD in the maxilla and according to ALD, IMPA in the mandible. Discrepancies between preorthodontic prediction values and actual postorthodontic values and factors contributing to the prediction must be considered in treatment planning of Cl III surgical patients to increase the accuracy of prediction. Furthermore future investigations are needed on the prediction of vortical changes.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.825-838
• /
• 1998

The purpose of this study was to evaluate the differences of soft tissue profile changes between the growing patients and the adult who had passed the growth peak, in orthodontic treatment with four premolar extractions. The results which was taken by correlating the soft tissue changes with hard tissue changes, lip thickness, molar relationship and arch length discrepancy in both groups was like the followings. 1. Significant hard tissue changes were decrease of VIs, VIi, UlPP, LlMP, HIi and increase of HPog'in adults and decrease of VIs, VIi and increase of VA, VPog'and all the vertical measurements in adolescents. 2. Significant soft tissue changes were decrease of VLs, VLi, and VILS in adults and increase of VSn, VSLS, VLs, VPog' and almost all vertical measurements in adolescents, and ${\Delta}LsE,\;{\Denta}LiE$ in adults and ${\Delta}LsE,\;{\Denta}LiE,\;{\Delta}LiSP\;and\;{\Delta}Mang$ was also significant 3. Correlation coefficient between ${\Delta}VIs\;and\;{\Delta}VLs$ was the greatest in adults and the next was ${\Delta}Ii/{\Delta}Li,\;{\Delta}Ii/{\Delta}ILS,\;{\Delta}ID/{\Delta}Li\;and\;{\Delta}ID/{\Delta}ILS$. In contrast all the vertical and horizontal measurements of hard and soft tissue in adolescents showed statistically significant corerrlation. 4. There were differences in correlation between soft tissue changes and incisor inclination and retraction at both groups, but the lower lip, nasolabial angle and mentolabial angle were commonly less influenced by the hard tissue changes in both groups. 5. The thinner the upper lip was, the more the ${\Delta}LsSP$ was in both groups, and the thinner the lower lip was, the more the ${\Delta}LiE\;and\;{\Denta}LiSP$ was in adolescents. 6. Molar relationship didn't influence the soft tissue profile changes. 7. Arch length discrepancy didn't influence the soft tissue profile changes.

• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.673-688
• /
• 1999

This study was conducted in order to analyze the mechanical characteristics of multiloop edgewise archwire (MEAW). The purposes were 1) to compare load deflection rate (LDR) of MEAW with that of various other arch wires in the individual interbracket span, 2) to compare the wire stiffness in the interbracket span with that in the multi-L-loop region (the span from distal border of the bracket of the lateral incisor to the mesial border of the buccal tube of the second molar), and 3) to verify the experimental results with theoretically derived formula. The single L-loops of five different horizontal lengths and multi-L-loops for the upper and lower arches were made out of .$016\times.022$ permachrome stainless steel wire. Straight segment of plain stainless steel, TMA and NiTi wire of the same dimension were prepared. The LDR was measured using Instron model 4466 with the load cell of 50N capacity at cross head speed of 1.0mm/min, and maximum deflection of 1.0mm. Five specimens were tested under each experimental condition. The wire stiffness number for each interbracket region and multi-L-loop region was calculated from the LDR and the interbracket spans. By dividing the theoretical model of multi-L-loop into 35 linear segments, the energy stored in each segment was obtained. Then the LDR and wire stiffness of single L-loop and multi-L-loop were calculated and compared. The findings were as follows : 1) The average LDR of MEAW in the individual interbracket region was 1/1.53 of that of the NiTi,1/2.47 of TMA and 1/5.16 of the plain stainless steel wire. 2) The wire stiffness of MEAW in the multi-L-loop region was 1.53 times larger than that in the interbracket region, and the LDR was almost twice as large as that of NiTi in that region. 3) According to the theoretically derived equation, the wire stiffness of the single L-loop was lower than that of multi-L-loop. The results of this study suggest that MEAW has the unique mechanical Property which could allow individual tooth movement and transmit elastic force effectively through the entire arch wire.

• The korean journal of orthodontics
• /
• v.32 no.3 s.92
• /
• pp.195-207
• /
• 2002

Numerous studies have revealed the similarities and discrepancies in two divisions of class II malocclusion, since these malocclusion groups have been postulated to be disparate criterion, much as classified under one diagnostic umbrella. This study was undertaken to describe the craniofacial configurations of class II division 1 and 2, and consequently to discriminate the morphologic differences between the two malocclusion groups in Korean sample. Lateral headfilms of 34 class H division 1 and 29 division 2 were employed, while those of 142 adults of normal occlusion served as a control. The landmarks were digitized and 26 variables were statistically analyzed for one way ANOVA. 1. There manifested no statistically significant difference in maxillary position anteroposteriorly. Normal occlusion group exhibited most anteriorly positioned mandible, whereas class II division 1 showed the most retroposition. Class II division 1 disclosed clockwise rotation tendency of mandible, which resulted in position of the chin Posteriorly. 2. Class II division 1 showed greater in SN to MP, SN to PP significantly than other groups. 3. Class II division 2 showed smaller genial angle and larger mandibular body length than other groups. 4. Class II division 1 revealed greater anterior lower face height than other groups, whereas division 2 dictated significantly greater posterior face height. 5. Class II division 2 expressed the most retroclined lower incisor, while division 1 manifested the most proclination. The largest interincisal angle resided in Class II division 2 group. There were no significant differences in upper molar position anteroposteriorly.