• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.235-245
• /
• 2014

This paper presents an envelope tracking power amplifier using a standard CMOS process for the 3GPP long-term evolution transmitters. An efficiency of the CMOS power amplifier for the modulated signals can be improved using a highly efficient and wideband CMOS bias modulator. The CMOS PA is based on a two-stage differential common-source structure for high gain and large voltage swing. The bias modulator is based on a hybrid buck converter which consists of a linear stage and a switching stage. The dynamic load condition according to the envelope signal level is taken into account for the bias modulator design. By applying the bias modulator to the power amplifier, an overall efficiency of 41.7 % was achieved at an output power of 24 dBm using the 16-QAM uplink LTE signal. It is 5.3 % points higher than that of the power amplifier alone at the same output power and linearity.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.326-335
• /
• 2017

In the uplink transmission of massive (or large-scale) multi-input multi-output (MIMO) systems, large dimensional signal detection and its hardware design are challenging issues owing to the high computational complexity. In this paper, we propose low-complexity hardware architectures of Richardson iterative method-based massive MIMO detectors. We present two types of massive MIMO detectors, directly mapped (type1) and reformulated (type2) Richardson iterative methods. In the proposed Richardson method (type2), the matrix-by-matrix multiplications are reformulated to matrix-vector multiplications, thus reducing the computational complexity from $O(U^2)$ to O(U). Both massive MIMO detectors are implemented using a 65 nm CMOS process and compared in terms of detection performance under different channel conditions (high-mobility and flat fading channels). The hardware implementation results confirm that the proposed type1 Richardson method-based detector demonstrates up to 50% power savings over the proposed type2 detector under a flat fading channel. The type2 detector indicates a 37% power savings compared to the type1 under a high-mobility channel.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5513-5529
• /
• 2016

Doppler Effect is a prominent obstacle in vehicular networks, which dramatically increase the Bit-Error-Rate (BER). This problem is accompanied with the presence of the Orthogonal Frequency Division Multiplexing (OFDM) systems in which the Doppler shift interrupts the subcarriers orthogonality. Additionally, Inter-Symbol Interference (ISI) and high Peak-to-Average Power Ratio (PAPR) are likely to occur which corrupt the received signal. In this paper, the single-carrier combined with the frequency domain equalizer (SC-FDE) is utilized as an alternative to the OFDM over the IEEE 802.11p uplink vehicular channels. The Minimum Mean Squared Error (MMSE) and Zero-Forcing (ZF) are employed in order to study the impact of these equalization techniques along with the SC-FDE on the propagation medium. In addition, we aim to enhance the BER, improve the transmitted signal quality and achieve ISI and PAPR mitigation. The proposed schemes are investigated and we found that the MMSE outperforms the ZF equalization under different Doppler shift effects and modulations.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.5-8
• /
• 2001

Wideband code division multiple access (WCDMA) is the most widely adopted third generation air interface. The physical layer of the air interrace is the main discussion topic during standardization processes. This paper aims to investigate the performance of uplink WCDMA over many conceivable transmission scenarios in realistic operating conditions. The focus of the study is placed on the performance under frequency selective fading channel conditions with multiple access interference (MAI) in mixed services environments. For the investigation, a simulator has been developed and it encompasses a variety of WCDMA air interface features. The results show that the performance is greatly affected by MAI and is further aggravated with the presence of frequency selective fading, thereby necessitating a suitable compensation measure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.52-57
• /
• 2016

We introduce a hybrid scheduling in a multi-path poor scattering full-duplex (FD) system, which consists of one multi-antenna FD base station and a large number of single-antenna half-duplex mobile stations. Our hybrid scheduling utilizes partial channel state information at the transmitter. In particular, unlike the conventional scheduling method using opportunistic transmission for both uplink and downlink, the proposed scheme combines a random transmit beamforming for downlink and a zero forcing beamforming for uplink. As our main result, via computer simulations, it is shown that the proposed scheme has a superior sum-rate performance than that of the conventional scheduling method beyond a certain signal-to-noise ratio regime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.537-542
• /
• 2017

In this paper, we propose a new scheduling scheme to reduce the complexity and overhead in TDD uplink cellular networks. In a TDD network, users can estimate the interference causing to neighboring BSs by measuring the signals transmitted from them. In the existing max SGIR scheduling scheme, each user calculates SGIR and feeds back to BS. Then, the BS selects a user having the largest SGIR value to transmit data. This scheme has a problem that as the number of BSs increases, the number of interference channels to be measured by the users increases, and thus the hardware and algorithm complexity of the user increases. We propose a max SmGIR (Signal-to-max generating interference ratio) scheduling scheme that can reduce the user complexity by predicting the SGIR value based on only the largest interference information. According to computer simulations, the proposed scheme has similar performance to the existing max SGIR scheme despite this low complexity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.37-39
• /
• 2015

In this paper, we propose a distributed user scheduling with interference-aware power control (IAPC) to maximize signal to generating interference plus noise ratio (SGINR) in multi-cell uplink network. Assuming that the channel reciprocity time-division duplexing (TDD) system is used, the interference channel from users to other cell BSs is obtained at each user. In the proposed scheduling, each user reduces the transmit power if its generating interference to other BSs is larger than a predetermined threshold. Each BS selects the user with the largest SGINR among users. Simulation results show that the proposed technique significantly outperform the existing user scheduling algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.603-610
• /
• 2005

Beam-forming method based on the estimated channel information at the base station degrade the performance mismatching directional vector in case of systems which Frequency Division Duplex (FDD) center frequency of uplink and downlink are different. Also blind estimation technique which is to obtain directional vector of reverse link through received signal has disadvantage of hardware complexity increase. To solve these problems, in present paper, a smart antenna algorithm which is to improve the beam-forming complexity increase due to user number by appling the spatial fourier transform to be able to beam- forming toward a wanted direction through adjusting a obtained uplink weight function by estimating Angle-of-Arrival (AoA) to the competable form at the downlink is proposed. The proposed algorithm is integrated to the CDMA downlink transmitter and simulations are performed to confirm the performance as frame error rate at the receiver. As a result, the beam forming effect is confirmed and the performance gain with the proposed algorithm is comparable to ordinary smart antenna system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10A
• /
• pp.952-959
• /
• 2006

In this paper, 2-D RAKE receiver simulator is made which beamforming technique is applied to in WCI)MA uplink basestation, and the performance is compared with that of 1-D RAKE receiver with varying the number of array elements, RAKE fingers and users. To model angular component of received signal and interfering signals due to multiple access, it is assumed that multiple users are located in the arbitrary direction of the same distance far from the basestation within a sector of the cell, and the channel simulator is made by using Geometry Based Single Bounce Elliptical Model(GBSBEM) suggested by Rappaport. BER performance is compared and analyzed with the various choise of the number of array elements, the number of RAKE fingers, the number of users and Eb/No. These results indicate that increasing the number of array elements eliminates efficiently multiple access interfering signals and improves dramatically BER performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1696-1703
• /
• 2010

Increased demand for military satellite communications system and due to the depletion of resources of existing satellite communications frequencies, Ka-band and EHF-band satellite communication systems is growing demand for development. As a result, the study of rain attenuation mitigation for Ka/EHF-band frequencies has been achieved. The method to compensate rain attenuation on Ka-band(20/30) using the signal power measurement function in Digital Transponder of Next Military Satellite has been proposed in this paper. This method is more effective than generally used method by Beacon and UPC(uplink power control) in giving the precise rain attenuation measurement and correction.