• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.58-67
• /
• 1994

In this paper, It was designed the 2.8GHz local oscillator which convert 14.5 14.8GHz uplink frequency to 11.7 12.0GHz downlink frequency by the receiving mixer on the communication satellite transponder according to the rating of domestic satellite. Mukunghwa 1. To prevent the variation of the communication channel bandwidth, it needs a high stability and low phase noise characteristics. So we designed to get the target frequencey by multipling the output signal from the crystal oscillator. We got the simplicity of the circuit by manufacturing the X4 multiplier with transistor which is ordinarily used as a device of a below X3 multiplier for the efficiency.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.44-48
• /
• 2000

In this study was modify the PRMA for supporting various types of traffic classes such as CBR, VBR, ABR and UBR. For uplink, we use reservation slots and so the performance will not degrade in case of over load conditions. For downlink broadcasting slots for informing the status of slot reservations are used so the high priority priority terminal can preempt. And we use almost same size buffer as the frame size. So we can dynamically deal with, the traffic changes of VBR terminals. It makes easy for the terminals to reserve supplementary slots. Each terminal is reallocated by the priority of traffic classes and so we can easily select the dropping packets in case of overload conditions. As a result, using our scheme, we can get high channel efficiency and get low packet dropping ratio and delay.

• 센서학회지
• /
• 제25권3호
• /
• pp.189-195
• /
• 2016

In this paper, we newly introduce a visible light communication (VLC) repeater using the LED array in an LED lamp. The LED array is used for a light source in the repeater, which radiates light both for illumination and data transmission. A VLC repeater is made by adding some electronic circuits to the LED array including a photodetector, a demodulator, and a modulator. The repeater is installed on the ceiling of a room like a conventional LED lamp, receives the VLC signal from an arbitrary transmitter, recovers data, and radiates the signal to wide area in the room. We used a carrier frequency of 100 kHz for the uplink from a transmitter to the repeater, and 500 kHz for the downlink from the repeater to a receiver. The repeater is useful for increasing the transmission path to wide area over the obstacles that may exist between VLC transmitters and receivers.

• 한국전자파학회지:전자파기술
• /
• 제5권3호
• /
• pp.36-47
• /
• 1994

업링크와 다운링크 경로상에 각각 가산성 백색 가우스잡음이 존재하는 이동 위성 통신로에서 $\pi$1VTA의 비선 형성에 의한 BPSK신호와 QPSK선호의 오율성능을 조사하였다. 다운렁크 정로상의 페이딩은 Rician 분포를 한다고 가정하였다. 또한 선택적 다이버시티에 대한 효과를 분석하였다. 선택적 다이버시티의 확률빌도함수에 관한 N차 모멘트를 구하였으며, 선택적 다이버시타의 확률밀도함수에 대한 근사 이산 확률분포를 고전적인 모 멘트 기법 (CMT)을 이용하여 유도하였다. 오율은 Gauss Quadrature Formula와 근사 이산 확률 분포를 이용 하여 계산하였다.

• 전기학회논문지P
• /
• 제60권1호
• /
• pp.37-44
• /
• 2011

HSPA(High Speed Packet Access)/HSPA+ is a combined 3GPP(Third Generation Partnership Project) standard of HSDPA(High Speed Downlink Packet Access) and HSUPA(High Speed Uplink Packet Access). The standard can provide the high speed multimedia service against the 3GPP release 99 standard. In order to test the 3GPP HSPA/HSPA+ terminal performance, the measurement hardware is required for the evaluate the transmitted signal of HSPA/HSPA+ terminals. Agilent Technologies and Innowireless produce the measurement equipments for HSPA/HSPA+ terminals. Generally speaking, the receiving algorithms in normal modems cannot be used directly to the measurement system due to the lack of the algorithm accuracy. In this paper, we propose the new receiver algorithm for precise measurement of 3GPP HSPA/HSPA+ terminal signal, and implement measurement functionality for performance measurement of the 3GPP HSPA/HSPA+ terminal by using software. The proposed 3GPP HSPA/HSPA+ signal measurement algorithm can be used for the commercial system through code execution speed optimization.

• 항공우주기술
• /
• 제8권2호
• /
• pp.41-53
• /
• 2009

본 연구는 차세대 항공 데이터 통신시스템(VDL Mode 2) 개발관련 탑재/지상 운용시험장비 및 VME 와 AOA네트워크 간의 인터페이스 (이하 KARI-Wrapper) 설계 부분을 기술하고 있다. 탑재/지상용 KARI-Wrapper 설계사양은 ARINC 618, 620, 622 문서를 바탕으로 분석하였고, 시스템 구성도를 작성하여 각 구성품간의 입출력 인터페이스를 설계하였다. 이러한 시스템 구성도 근거로 상/하향 데이터 송수신에 대한 시험을 수행하여 요구조건을 만족하는지 확인하였다.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.504-509
• /
• 2005

MC-DS-CDMA 시스템의 상$\cdot$하향링크에서 비선형 전력 증폭기와 반송파 주파수 편차의 영향을 고려하여 데이터가 주파수 선택적 Rayleigh 페이딩 채널을 통하여 전송될 때 비트 오류율을 분석한다. 분석 결과, 여러 명 사용자 경우에 상향링크가 하향링크 경우에 비하여 비트 오류율 특성이 우수하다. 본 논문에서는 우수한 비트 오류율 특성을 위하여 상$\cdot$하향링크에서 사용자 수에 따라 요구되는 비선형 증폭기의 최대 출력 전력 대 평균 출력 전력 비(OBO)와 반송파 주파수 편차의 크기를 구한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권1호
• /
• pp.6-18
• /
• 2004

This paper addresses the development and design of the HAUSAT-l (Hankuk Aviation University SA'Tellite-D communication subsystem, which is a next generation picosatellite, developed by SSRL (Space System Research Lab.) of Hankuk Aviation University. The communication subsystem generally consumes the majority of power and volume for picosatellites, and thus its design is critical to the overall satellite and mission plans. The HAUSAT-l designs are implemented by using the 145.84 MHz for uplink and 435.84 MHz for downlink frequency bands. The simulation and test results of the homemade radio and the TNC (Terminal Node Controller) integrated on the HAUSAT - I , a picosatellite scheduled to launch on September 2004 by Russian launch vehicle "Dnepr", are presented for EM, QM and FM, respectively.

• 한국컴퓨터정보학회논문지
• /
• 제11권5호
• /
• pp.203-209
• /
• 2006

본 논문에서는 페이딩을 감소시키는 다이버시티 기법 알고리즘을 제안하였다. 무선채널에서 다중경로 때문에 페이딩이 발생하면 시스템 성능이 현저하게 감소한다. 본 연구에서 수신기는 탭 지연 수신기를 사용하였다. 변조방식은 QPSK와 OQPSK를 사용하였고, 부호율이 1/2, 1/3과 구속장이 11인 길쌈부호와 구속장이 6인 터보 코드를 사용하였다. 본 논문에서 제안된 다이버시티기법으로 순방향과 역방향 채널에서 페이딩지수를 변화시키면서 변조방식에 대한 평균에러확률을 비교분석하였다.

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.84-91
• /
• 1996

Input filter for satellite communication transponder is the interface between the antenna and the receiver. It is used to provide the selection of the uplink signals with minimum insertion loss and to prevent downlink signals form reaching the LNA. This paper is intended to provide a description of the input filter for KOREASAT communication transponder. Included are description for the electrical and mechanical design and the requirments of environmental test. In expecting the electrical performine the optimum electrical configuration ot meet all requirements are performed. Mechanical requirements are charactersed by several constraints for weight, size of the filter and its type of input output interface. The standardized environmental tests are performed to confirm satisfactory performance of the filter with respect to the requirements of vibration and thermal vacuum shocks.