• Journal of the Korean Geotechnical Society
• /
• 제37권3호
• /
• pp.43-50
• /
• 2021

On the construction of new roads, the cut slope is inevitable and thus has been widely applied in the mountainous area. Particularly, the retaining wall with the precast concrete panel is often selected for its higher stability and mostly constructed in bottom-up method. However, the bottom-up method results in steeper slope as 1:0.05 before constructiong retaining wall and thus causes poor compaction at backfill which may induce instability during or after the construction. To overcome this problem, precast concrete panel retaining wall was attached in-situ ground (so called top-down). This paper presents the evaluation of drainage capacity of top-down method which has impermeable layer between panel and mortar being used to increase the ability of attachment of the precast concrete panel.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제24권2호
• /
• pp.123-128
• /
• 2014

This paper presents the study about MGV(Magnetic guidance vehicle) with up-and-down rotating type differential drive unit. Previous MGV needs the landmarks to get the driving information and additional sensor to recognize the landmarks except for localization sensor. Previous MGV requires at least 2 drive units when common fixed differential drive unit is used because it occurs the problems with driving control and localization error from imbalance of the MGV's weight. To solve such problems, we propose the MGV using up-and-down rotating type differential drive unit. Proposed MGV recognizes the driving information from the pattern which is consisted of both pole of magnet without landmarks and additional sensors, and it control the backward movement using up-and-down rotating type differential drive unit instead of common drive units. Proposed MGV considers KF(Kalman filter) to improve the localization accuracy. To verify the performance of proposed method, we designed MGV for the experiment. As the results, we can confirm the performance of propoesed method to recognize the pattern and to control the backward movement. With respect to localization, proposed method has the less RMSE about 5.6904 mm than previous method.

• Journal of Korea Multimedia Society
• /
• 제17권5호
• /
• pp.556-565
• /
• 2014

This paper proposes a method to track object of real-time video transferred through single web-camera and to recognize risk-situation and human actions. The proposed method recognizes human basic actions that human can do in daily life and finds risk-situation such as faint and falling down to classify usual action and risk-situation. The proposed method models the background, obtains the difference image between input image and the modeled background image, extracts human object from input image, tracts object's motion and recognizes human actions. Tracking object uses the moment information of extracting object and the characteristic of object's recognition is moment's change and ratio of object's size between frames. Actions classified are four actions of walking, waling diagonally, sitting down, standing up among the most actions human do in daily life and suddenly falling down is classified into risk-situation. To test the proposed method, we applied it for eight participants from a video of a web-cam, classify human action and recognize risk-situation. The test result showed more than 97 percent recognition rate for each action and 100 percent recognition rate for risk-situation by the proposed method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.333-338
• /
• 2003

Nano-imprint lithography(NIL) is a polymer embossing technique, capable of transferring nano-scale patterns onto a thin film of thermoplastics such as polymethyl methacrylate(PMMA) using this parallel process. Feature size down 10 nm have been demonstrated. In NIL, the pattern is formed by displacing polymer material, which can be squeeze flow of a viscous liquid. Due to the size of the pattern, a thorough understood of the process through experiments may be very different. Therefore we nead to resort to numerical simulation on the embossing process. Generally, there are two ways of numerical simulation on nano-scale flow, namely top-down and bottom-up approach. Top-down approach is a way to simulate the flow assuming that polymer is a continuum. On the contrary, in the bottom-up approach, simulation is peformed using molecular dynamics(MD). However, as latter method is not feasible yet. we chose the top-down approach. For the numerical analysis, two dimensional moving grid was used since the moving grid can predict the flow front. Effects of surface tension as well as the slip at the boundary were also considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제15권2호
• /
• pp.137-146
• /
• 1990

A series of images whose sized and resolutions differ by a constant factor are called an image pyramid. Because the images at high levels are small, large object can be detected on high levels of the pyramid at low cost, But in this way, the boundaries of objects are not accurately localized. Therefore the pyramid algorithms extracte the objects by segmentation the constructed image using bottom-up method and description it in an original resolution using inverse bottom-up method. In this paper, we can project an object down to the next lower level of the pyramid and apply to the boundary adjustment algorithm at that level to localize it more precisely. We repeat the process at successively lower levels. In this paper, we present a method of boundary adjustment using an image pyramid to obtain optimal boundary. The performance of the proposed algorithm is compared to those of the conventional method in term of subjective quality of object boundary.

• Biomedical Science Letters
• /
• 제15권3호
• /
• pp.261-263
• /
• 2009

Methylprednisolone is a synthetic glucocorticoid which is usually taken intravenously for many neurosurgical diseases which cause edema including brain tumor, and trauma including spinal cord injury. Methylprednisolone reduces swelling and decreases the body's immune response. It is also used to treat many immune and allergic disorders, such as arthritis, lupus, psoriasis, asthma, ulcerative colitis, and Crohn's disease. To identify genes expressed during methylprednisolone treatment against neurons of rats (PC12 cells), DNA microarray method was used. We have isolated 2 gene groups (up- or down-regulated genes) which are methylprednisolone differentially expressed in neurons. Lipocalin 3 is the gene most significantly increased among 772 up-regulated genes (more than 2 fold over-expression) and Aristaless 3 is the gene most dramatically decreased among 959 down-regulated genes (more than 2 fold down-expression). The gene increased expression of Fgb, Thbd, Cfi, F3, Kngl, Serpinel, C3, Tnfrsf4 and Il8rb are involved stress-response gene, and Nfkbia, Casp7, Pik3rl, I11b, Unc5a, Tgfb2, Kitl and Fgf15 are strongly associated with development. Cell cycle associated genes (Mcm6, Ccnb2, Plk1, Ccnd1, E2f1, Cdc2a, Tgfa, Dusp6, Id3) and cell proliferation associated genes (Ccl2, Tnfsf13, Csf2, Kit, Pim1, Nr3c1, Chrm4, Fosl1, Spp1) are down-regulated more than 2 times by methylprednisolone treatment. Among the genes described above, 4 up-regulated genes are confirmed those expression by RT-PCR. We found that methylprednisolone is related to expression of many genes associated with stress response, development, cell cycle, and cell proliferation by DNA microarray analysis. However, We think further experimental molecular studies will be needed to figure out the exact biological function of various genes described above and the physiological change of neuronal cells by methylprednisolone. The resulting data will give the one of the good clues for understanding of methylprednisolone under molecular level in the neurons.

• IEMEK Journal of Embedded Systems and Applications
• /
• 제5권2호
• /
• pp.93-102
• /
• 2010

The FMCW(Frequency Modulation Continuous Wave) radar possesses range-velocity ambiguity to identify the correct combination of beat frequencies for each target in the multi-target situation. It can lead to ghost targets and missing targets, and it can reduce the detection probability. In this pap er, we propose an effective identification algorithm for the correct pairs of beat frequencies and the signal processing hardware architecture to effectively support the algorithm. First, using the correlation of the detected up- and down-beat frequencies and Doppler frequencies, the possible combinations are determined. Then, final pairing algorithm is completed with the power spectrum density of the correlated up- and down-beat frequencies. The proposed hardware processor has the basic architecture consisting of beat-frequency registers, pairing table memory, and decision unit. This method will be useful to improve the radar detection probability and reduce the false alarm rate.

• Journal of IKEEE
• /
• 제13권4호
• /
• pp.82-88
• /
• 2009

This paper is analyzed for a step up-down DC/DC chopper of high efficiency added electric isolation. The converters of high efficiency are generally made that the power loss of the used semiconductor switching devices is minimized. To achieve high efficiency system, the proposed chopper is constructed by using a partial resonant circuit. The control switches using in the chopper are operated with soft switching by partial resonant method. The control switches are operated without increasing their voltage and current stresses by the soft switching technology. The result is that the switching loss is very low and the efficiency of the chopper is high. The proposed chopper is also added electric isolation which is used a pulse transformer. When the power conversion system is required electric isolation, the proposed chopper is adopted with the converter system development of high efficiency. The soft switching operation and the system efficiency of the proposed chopper are verified by digital simulation and experimental results.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.638-641
• /
• 2006

In this paper, A calculating cost method of maintenance and repair for bridge which is built up by new construction technique named Up-Down Precast Concrete(UDPSC). After 2000, 109 Bridges which are using UDPSC technique have been built up, 37 bridges's construction work are processing, and 194 designs are presented for construction. Because this technology has developed recently, there are few field data for analyzing the maintenance and repair cost. Therefore, the maintenance and repair cost is computed using Construction and Transportation Ministry's guide line for computation and former research's data.

• Proceedings of the KSPS conference
• /
• 대한음성학회 2006년도 춘계 학술대회 발표논문집
• /
• pp.41-44
• /
• 2006

The purpose of state tying is to reduce the number of models and to use relatively reliable output probability distributions. There are two approaches: one is top down clustering and the other is bottom up clustering. For seen data, the performance of bottom up approach is better than that of top down approach. In this paper, we propose a new clustering technique that can enhance the undertrained triphone clustering performance. The basic idea is to tie unreliable triphones before clustering. An unreliable triphone is the one that appears in the training data too infrequently to train the model accurately. We propose to use monophone distance to preprocess these unreliable triphones. It has been shown in a pilot experiment that the proposed method reduces the error rate significantly.