• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.20-28
• /
• 2008

Missile operating at supersonic conditions experiences considerable high temperature environments that is caused by aerodynamic heating as a result of the temperature gradient through boundary layer that surrounds it. This is one of important problems to the designer due to temperature limitation of structural materials. Because prediction of aerodynamic heating on missile needs unsteady calculation according to a flight trajectory, approximate method approach is efficient at design stage. In this paper, improved aerodynamic heating analysis scheme is introduced, which calculates heat flow and temperature by simple pressure field prediction on a missile body and fin. The prediction results are compared with measured data and MINIVER codes results.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.397-404
• /
• 2001

The behavior of unsteady wake vortices for the two-dimensional flat plate is simulated by a discrete vortex method. The flat plates and their wakes are represented by vortex sheets. The vortex sheets are replaced with discrete vortices. The freely deforming wake sheets are computed as a part of solution and the ground effect is included by a image method. In order to predict wake shapes accurately and to model closely coupled aerodynamic interference, a vortex core model and a vortex core addition scheme are used. The simulated wake shapes convecting behind the plates in unsteady motion are compared to a flow visualization result and other numerical results. The present results agree well with them. The present method is also applied to the aerodynamic analysis of flat plates in tandem configuration in ground effect.

• Wind and Structures
• /
• 제38권1호
• /
• pp.59-74
• /
• 2024

Large Eddy Simulation (LES) is used to explore the influence of vibration frequency and amplitude on the aerodynamic performance of a rectangular cylinder with an aspect ratio of B/D=5 (B: breadth; D: depth of cylinder) at a Reynolds number of 22,000 near resonance frequency. In smooth flow conditions, the research employs a sequence of three-dimensional simulations under forced vibration with diverse frequency ratios f_e / f_o = 0.8-1.2 (f_e : oscillation frequency; f_o : Strouhal frequency when the rectangular cylinder is stationary ) and oscillation amplitudes A_h/D = 0.05 - 0.3. The individual influences of f_e / f_o and A_h/D on the characteristics of integrated and distributed aerodynamic forces are the focal points of discussion. For the integrated aerodynamic force, particular emphasis is placed on the analysis of the dependence of velocity-proportional component C₁ and displacement-proportional component C₂ of unsteady aerodynamic force on amplitude and frequency ratio. Near the resonance frequency, the dependencies of C₁ and C₂ on amplitude are stronger than that of frequency ratio. For the distributed aerodynamic force, the increase in frequency and amplitude promotes the position of the main vortex core and reattachment to the leading edge in the streamwise direction. In the spanwise direction, vibration enhances the spanwise correlation of aerodynamic force to weaken the three-dimensional effect of the flow field, and a lower frequency ratio and larger amplitude amplify this effect.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1750-1756
• /
• 2001

Three-dimensional and unsteady flow analysis is a practical target of high performance computation. As recently advances of computers, a numerical prediction by the large eddy simulation (LES) are introduced and evaluated for various engineering problems. Its advanced methods for the complex turbulent flows are discussed by several examples applied for aerodynamic designs, analysis of fluid flow mechanisms and their interaction to complex phenomena. These results of time-dependent and three-dimensional phenomena are visualized by interactive graphics and animations.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2006년도 춘계학술대회 논문집
• /
• pp.79-84
• /
• 2006

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.281-286
• /
• 2004

The vacuum cleaner motor runs on very high speed for the suction power. Specially, the motive power is provided by the impeller being rotate on very high speed. And centrifugal fan consists of the impeller, the diffuser, and the circular casing. Due to the high rotating speed or the impeller and small gap distance between the impeller and diffuser, the centrifugal fan makes very high noise level at BPF and harmonic frequencies. In order to calculate the sound pressure of centrifugal fan, the unsteady flow data is needed. And Noise cause is dividing to fluid noise by exhaust flow of fan and vibration noise by rotational vibration of vacuum cleaner fan motor. Until now, measuring method has been used to measure vibration by the accelerometer; this method has been not measured for the vibration in some parts of brush and commutator because of motor construction and 3-D vibrating mode. This paper was purposed on the accurate analysis, using laser vibration analyzer,. By using this measured data of noise cause against the difficult part in old times, we would like to use for the design of silent fan motor.

• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.1-8
• /
• 2020

구조적 특성 및 공력의 상호작용과 조종면 작동기의 제어 시스템의 영향을 고려한 서보공력탄성 해석을 수행하였다. 공탄성 안정성 해석을 위해서 선행되어야 하는 구조모델의 자유진동 해석은 유한요소 해석 프로그램 MSC Nastran을 사용하였다. 비정상 공기력 계산에 ZAERO를 사용하였다. 비정상 공기력 검증에 Doublet Hybrid Method를 사용하였다. Karpel의 최소상태근사법을 이용하여 주파수 영역의 공기력을 라플라스 영역으로 근사하였다. 공탄성 상태방정식을 구동기의 동역학 상태방정식과 결합하여 서보 공탄성 모델의 상태공간방정식을 구성하였다. 고세장비 모델의 승강타 입력에 따른 안정성 해석을 수행하였다. 근궤적법과 시간적분법을 사용하여 주파수영역과 시간영역에서의 서보공탄성 안정성 해석을 수행하였다.

• 한국항공우주학회지
• /
• 제36권8호
• /
• pp.728-733
• /
• 2008

경계요소법을 이용하여 비평면 지면 위를 움직이는 공압부양 고속 지상운송체의 비정상 공력해석을 수행하였다. 비정상 공력해석을 위하여 시간전진법과 이에 연계한 자유후류를 도입하였다. 공압부양 고속 지상운송체가 채널 내를 움직일 때, 채널에 갇힌 공기에 의해 지면효과가 증가하여 운송체의 양력계수와 피칭모멘트 계수가 더욱 증가한다. 즉, 채널과 같은 비평면 지면은 운송체의 종방향 불안정성을 증가시킨다. 반면, 채널과 같은 비평면 지면에 의한 양력상승이 운송체 탠덤날개의 왼쪽과 오른쪽에 동일하게 발생하기 때문에 채널과 같은 비평면 지면효과가 운송체의 횡방향 안정성에 미치는 영향은 크지 않다.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.21-29
• /
• 2004

Numerical analysis of aerodynamic heating for KPSAM is performed using aerodynamic heating model suitable to KPSAM, which has complex flow field resulting from the spike attached to the dome, such as large separation area and the strong shock/boundary layer interaction region around reattachment point on the dome. The aerodynamic heating model is validated and modified through the comparison between the flight test measurement and the thermal analysis results. TFD temperature sensors are installed on the dome to measure surface temperature during the flight. Computation results, obtained from the heat transfer analysis on the sensors, agree well with flight test data. The aerodynamic heating model provides heat transfer rate into surface as a boundary condition of unsteady 1D/axisymmetric thermal analysis on the missile structure. The axisymmetric thermal analysis using FLUENT is more versatile than the 1D analysis and can be applied to the heating problem related with complex structures and multi-dimensional heat transfer problems such as prediction of temperature rise at contact surface of different materials.

• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.369-374
• /
• 2007

비평면 지면 위를 비행하는 플래퍼론이 있는 날개의 비정상 공력특성을 경계요소법을 사용하여 연구하였다. 시간 전진법을 사용하여 채널과 지면 위를 비행하는 날개 및 플래퍼론의 움직임에 따른 후류의 형상을 모사하였다. 지면 위 또는 채널 내를 비행하는 날개의 공력계수는 플래퍼론의 주기운동에 따라 일정한 루프로 나타난다. 플래퍼론 변화에 따른 롤링모멘트는 지면 위를 비행하는 날개와 채널 내를 비행하는 날개가 동일한 결과를 나타내었다. 피칭모멘트는 지면에서 보다 채널 내를 비행할 때 플래퍼론의 움직임에 따라 더 큰 변화폭을 나타내었다. 본 연구를 통해 비평면 지면 위를 비행하는 운송체의 안정성 해석에 필요한 다양한 공력계수 확보가 가능하다.