• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1851-1859
• /
• 2022

Experimental research on flow characteristics of open natural circulation system was performed, to figure out the mechanism of the open natural circulation behaviors. The influence factors, such as the heating power, the inlet subcooled and the level of cooling tank on the flow characteristics of the system were examined. It was shown that within the scope of the experimental conditions, there are five flow types: single-phase stable flow, flash and geyser coexisting unstable flow, flash stable flow, flash unstable flow, and flash and boiling coexisting unstable flow. The geyser flow in flash and geyser coexisting unstable flow is different from classic geysers flow. The flow oscillation period and amplitude of the former are more regular, is a newly discovered flow pattern. By drawing the flow instability boundary diagram and sorting out the flow types, it is found that the two-phase unstable flow is mainly characterized by boiling and flash, which determine the behavior of open natural circulation respectively or jointly. Moreover, compared with full liquid level system, non-full liquid level system is more prone to boiling phenomenon, and the range of heat flux density and undercooling degree corresponding to unstable flow is larger.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.79-83
• /
• 2000

Although it is well known that fuzzy learning controller is powerful for nonlinear systems, it is very difficult to apply a learning method if they are unstable. An unstable system diverges for impulse input. This divergence makes it difficult to learn the rules unless we can find the initial rules to make the system table prior to learning. Therefore, we introduced LQR(Linear Quadratic Regulator) technique to stabilize the system. It is a state feedback control to move unstable poles of a linear system to stable ones. But, if the system is nonlinear or complicated to get a liner model, we cannot expect good results with only LQR. In this paper, we propose that the LQR law is derived from a roughly approximated linear model, and next the fuzzy controller is tuned by the adaptive on-line learning with the real nonlinear plant. This hybrid controller of LQR and fuzzy learning was superior to the LQR of a linearized model in unstable nonlinear systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.808-813
• /
• 1999

A fuzzy learning method to control an unstable and multivariable system is presented in this paper, Because the multivariable system has generally a coupling effect between the inputs and outputs, it is difficult to find its modeling equation or parameters. If the system is unstable, initial condition rules are needed to make it stable because learning is nearly impossible. Therefore, this learning method uses the initial rules and introduces a cost function composed of the actual error and error-rate of each output without the modeling equation. To minimize the cost function, we experimentally got the Jacobian matrix in the operating point of the system. From the Jacobian matrix, we can find the direction of the convergence in the learning, and the optimal control rules are finally acquired when the fuzzy rules are updated by changing the portion of the errors and error rates.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.936-942
• /
• 1999

Unstable torsional vibration on the marine ship's propulsion shafting system with diesel engine occurred due to a slippage of multi-friction clutch which was installed between increasing gear and shaft generator. In this paper, the mechanism of this vibration was verified via torsional, whirling, axial and structural vibration measurements of shafting system and noise measurement of gear box. And it was also identified by the theoretical analysis method.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.192-198
• /
• 2005

In this paper, we propose a new training system for the improvement of equilibrium sense using unstable platform. The equilibrium sense, which provides orientation with respect to gravity, is important to integrate the vision, somatosensory and vestibular function to maintain the equilibrium sense of the human body. In order to improve the equilibrium sense, we developed the software program such as a block game, pingpong game using Visual C++. These training system for the equilibrium sense consists of unstable platform, computer interface and software program. The unstable platform was a simple structure of elliptical-type which included tilt sensor, wireless RF module and the device of power supply. To evaluate the effect of balance training, we measured and evaluated the parameters as the moving time to the target, duration to maintain cursor in the target of screen and the error between sine curve and acquired data. As a results, the moving time to the target and duration to maintain cursor in the target was improved through the repeating training of equilibrium sense. It was concluded that this system was reliable in the evaluation of equilibrium sense. This system might be applied to clinical use as an effective balance training system.

• Journal of the Korean Ceramic Society
• /
• v.22 no.3
• /
• pp.60-66
• /
• 1985

The formation mechanism of unstable alkali and its existing states in the clinker were studied. The relation of unstable alkali content vs. other water-soluble components porosity and the distributionof potassium were investigated. The results are as follows :1) Two states of unstable alkali seem to exist in clinker ie compounds of $K_2O-Al_2O_3$ system and free $K_2O$ 2) The content of water-soluble $Al_2O_3$ tends to increase with increase of unstable alkali content, 3) Most of alkalies in clinker are concentrated in liquid phase at high temperature. Therefore it is possible to make various $K_2O-Al_2O_3$ system compounds according to the content of $K_2O$ in the liquid phase of clinker. In this experiment we found out a $K_2O-Al_2O_3$ compound of high $Al_2O_3$ content (34%) and high $K_2O$ content (33%) in clinker with 1.09% unstable alkali. 4) The porosity of clinker tends to increase with increase of unstable alkali content. 5) The amount of trapped alkali vapor may increase in closed pore in the clinker with high alkali and low $SO_3$ condecent. Therefore free $K_2O$ is the condensed alkali on the wall of closed pore in the clinker.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.119-128
• /
• 2002

This study discusses the issues related to the accuracy of deflection measurement and unstable energy in the testing of FRC. Some deflection methods may include large extraneous deformations. A faulty load-deflection curve will be obtained if an unstable deflection measuring system is used, and inaccurate toughness evaluation can result from this faulty curve. Some load-deflection curve of FRC may be attributed to unstable region of the load-deflection curve. If the unstable region is not correctly evaluated toughness indices from the curve would inappropriately represent true indices. In this paper, the discussion will focus on the effects of the deflection measuring system both on the measurement of the load-deflection response of FRC and the evaluation of FRC toughness and the effects of the unstable region and the management method of unstable region on toughness evaluation of FRC. It is observed that ASTM toughness indices which is based on measured deflection at first cracking is influenced significantly by extraneous deformation of deflection measurement. Extraneous deformation in deflection measurement, however result in negligible errors in toughness evaluation if JSCE and JCI definitions are used.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.104-109
• /
• 1996

In passive sonar system, frequency lines generated by underwater target are very important for detection, tracking and classification. In this paper, the extraction method of unstable frequency line from the time samples of the radiated noise of underwater target is studied. As unstable frequency line is time varying, an extended Kalman filter algorithm which is desirable for nonlinear system is applied to extract unstable frequency line. The proposed method shows good extraction of unstable frequency line by application of simulated signal and real target.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.1 s.11
• /
• pp.39-48
• /
• 2004

Generally, a structural system with large inextensional deformations, or in other words, non-strained deformation is called as 'Unstable Structure', Truss-linked structures, cable structures, membrane structures and movable structures as foldable space structures etc, are included in this category. In this paper, a dynamic analysis method for unstable structural systems is presented. Governing equations for dynamic analysis of unstable truss structures with inextensional displacements are derived. Because of singularity of inverse matrixin in practical analysis of unstable structure, the generalized inverse matrix is Introduced to resolve the singular problem. Also, the RREF technique is used to get the inextensional displacement mode. Two unstable truss structures are analyzed by using presented method. Damping is not considered. From the given results, it is known that proposed method is useful to figure out the dynamic behavior of unstable truss structures.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.05a
• /
• pp.215-221
• /
• 2005

In this paper, we propose a method to a synchronization of chaotic UAVs that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. The proposed methods are assumed that if one of two chaotic UAVs receives the synchronization command, the other UAV also follows the same trajectory during chaotic UAVs search on the arbitrary surface.