• Journal of fish pathology
• /
• v.26 no.2
• /
• pp.65-75
• /
• 2013

Population growth equation of scuticociliate Miamiensis avidus was obtained from the experimental results of in vitro culture condition to estimate the growth rate and carrying capacity from the growth equation. In addition, intraperitoneal infections into olive flounder Paralichthys olivaceus were carried out into 2 different conditions: different concentrations of M. avidus in same water temperature and same concentration of M. avidus in different water temperatures. Olive flounder mortality was threshold dependent with both the temperature and M. avidus density parameters. In this paper, we propose a mathematical model to study M. avidus growth in olive flounder based upon the interactions between parasite and host. The mathematical model was logistic growth differential equation (1.2). The parameters were found with Matlab program through the Levenberge-Marquardt method. In theorem, equilibrium values between the infected fish population and dead population could found. Our equilibrium points were a stable equilibrium and an unstable equilibrium. From the equation (1.6), it was possible to predict the amount of cumulative mortality of olive flounder along with the time after M. avidus infection.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.25-45
• /
• 1996

Soyfoods have potential roles in the prevention and treatment of chronic diseases, most notably cancer, osteoporosis, and heart disease. There is evidence that carcinogenesis are supressed by isolated soybean derived products in vivo such as a protease inhibitor, phytic acid, saponins and isoflavones. It is believed that supplementation of human diets with soybean products markedly reduces human cancer mortality rates. Especially, recent papers recognize the potential benefit of soybean isoflavone components for reducing the risk of various cancers. Isoflavones exhibit a multitude of medicinal effects that influence cell growth and regulation, which may have potential value in the prevention and treatment of cancer. In addition to potential biological effects, soybean isoflavones have the important physiological functions such as the induction of Bradyrizobium japonicum nod genes and the responses of soybean tissues to infection by Phytophthora megasperma as well as biochemical activities such as antifungal and antibacterial actions. Genistin, daidzin, glycitin and their aglycone (genistein, daidzein, glycitein) are the principal isoflavones found in soybean. Malonyl and acetyl forms have also been detected but they are thermally unstable and are usually transformed during the processing in glucoside form. Most soy products, with the exception of soy sauce, alcohol-extracted soy protein concentrate, and soy protein isolate, have total isoflavone concentrations similar to those in the whole soybean. Soybean-containing diets inhibit mammary tumorigenesis in animal models of breast cancer, therefore, it is possible that dietary isoflavones are an important factor accounting for the lower incidence and mortality from breast cancer. Of the total soybean seed isoflavones, $80\~90\%$ were located in cotyledons, with the remainder in the hypocotyls. The hypocotyls had a higher concentrations of isoflavones on a weight basis compared with cotyledons. Isoflavone contents were influenced by genetics, crop years, and growth locations. The effect of crop year had a greater impact on the isoflavone contents than that of location. The climate condition might be the attribution factor to variation in isoflavone contents. Also, while the isoflavone content of cotyledons exhibited large variations in response to high temperature during seed development, hypocotyls showed high concentration in isoflavone content. So, it is concluded that one of the factors affecting isoflavone content in soybean seeds is temperature during seed development. High temperature, especially in maturity stage, causes lower isoflavone content in soybean seed. It is also suggested that there may exist a different mechanism to maintain isoflavone contents between cotyledon and seed hypocotyls. In a conclusion, soy foods may be able to have a significant beneficial impact on public health.

• Journal of The Korean Association of Information Education
• /
• v.9 no.3
• /
• pp.417-438
• /
• 2005

The purpose of this study was to find out the relations between elementary children's game addition, aggression, and personality, by making a survey with 360 children of 5th and 6th grade in the Metropolitan are. The results were made as follows: First, as it examined the real condition of computer addition, it presented a low level of addiction. There was a meaningful difference according to their gender, however no meaningful differences were found between the grades. It found that the more they had game experience, game frequency, game concentration, the more they were addicted. Second, there were significant differences when investigated the relations of game addiction and aggression, students who were in severe addicted group showed more aggressive attitudes. Aggression in general, seemed less related to the gender, but related to the level of addiction, showing higher level of physical, linguistic, negative, indirect aggression in the more addicted group. Third, when it compared the difference between the general personality by the level of game addiction, there was a meaningful difference statistically in the addicted level of p<0.01. In detail, more addicted children showed low level of sociality, achievement, mobility, stability, and they showed lower figures in comparison with normal user group. It is interpreted that they dislike to get along with friends, and unstable emotionally.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.4
• /
• pp.384-391
• /
• 1997

In the cultivation of Bupleurum falcatum, one of the problems to surmount is long-term germination period and unstable germination. This experiment was done to examine the effect of $GA_3$ concentration [0(water), 0.01, 0.lmM], chilling, their treatment period [2, 4, 8 days ($GA_3$) : 0, 2, 4 weeks (chilling)] and light quality (red, white, dark) given during the period as pretreatment before sowing on the seed germination of its two cultivars (cv. Jaerae, cv. Jangsu). Light treatment was given during all the periods of $GA_3$ treatment or for 0, 2, 4 days at the end of the chilling treatment. There was no difference in the mean germination rate between the levels of all the treatments except the $GA_3$ concentration meaning that water imbibition and $GA_3$ treatment had the same effect. As light quality treatment during the water imbibition was forced, the mean germination rate of Jaerae, 2 to 4 days imbibition period or red light was more increased or accelerated compared to the other levels of the same treatment, respectively. The rate of Jaerae not affected by the light quality was the greatest in the 2 days water imbibition while the rate of Jangsu was the greatest when water-imbibed for 4 days or treated by red light. No chilling before sowing showed the highest rate due to the light quality and white light forced after sowing had greater rate than the dark treatment. Although there was no difference between the rates of light quality treatment levels in the condition of no chilling before sowing and white light treatment after sowing, the rate of Jangsu was enhanced or accelerated only under illumination during 2 days water imbibition before sowing.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.107-114
• /
• 1998

The solubilities of $CO_2$ in 20wt% and 30wt% aqueous AMP solution were obtained from experiments at 40, 50, 60, 70, $80^{\circ}C$. Using the modified Kent-Eisenberg model, equilibrium constants and correlations were determined from the regression of experimental results of 30wt% aqueous AMP solution. There were good agreements between the predicted $CO_2$ solubilities in 20wt% aqueous AMP solution and experimented values. The prediction was conducted at the condition in the literature and the predicted values calculated from the model and correlations which were obtained from this work agree well with the prediction from Deshmukh-Mather model. Thus, the modified Kent-Eisenberg model and correlated equations suggested by this work, resonably well represent vapor-liquid equilibrium of $CO_2$ with aqueous AMP solution. The calculation of chemical species concentration in the liquid phase was performed uslng equilibrium model and from this calculation, we confirm that good absorption capacity is due to the formation of unstable carbamate. Heat of solution(${\Delta}Hs$) was calculated from the solubility data using the Gibbs-Helmholtz equation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.157-165
• /
• 2000

A small hydraulic winch system with an automatic tension control unit was designed to improve the work efficiency of coastal small vessels and the dynamic response characteristics of the winch system operated in the open loop condition was investigated. The inlet and the outlet pressures in hydraulic motor, the torque and the rotating speed of winch drum were measured as a function of time, and the behaviour in autotension mode for stepped load changes was analyzed. The results obtained are summarized as follows : 1. The developed winch system for coastal small vessels will result in better fishing with improved efficiency and lower manpower consumption by remote control of winch system. 2. The rotating delay times of winch drum for on/off operations of solenoid valve were 0.09 see at CW mode and 0.04 sec at CCW mode, respectively. After the solenoid valve was controlled, response characteristics were unstable slightly but showed good tracking behaviour over short time. 3. The driving torque of winch system in autotension mode was kept almost constant of 55.9 kgf·m, and 11.1 then the rotating speed of winch drum was kept almost constant of 5.1 rpm in the larger torque than 55.9 kgf·m and 11.1 rpm in the lower torque than that. 4. The 5% settling times in the transient response characteristics of autotension mode under rapid increasing and decreasing conditions of load were 0.12 sec and 0.2 sec, respectively, and then the rotating speeds were 11 rpm and 5.3 rpm, respectively. 5. The tracking behaviour of torque and rotating speed by remote control operation were stable within 0.23 sec at CW mode and 0.37 sec at CCW mode, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.177-186
• /
• 2017

This study is intended to provide navigator with specific information necessary to assist in the avoidance of collision and in operation of ships to evaluate the maneuverability of research vessel Jera. Authors carried out full-scale sea trials for turning test, zig-zag test, and spiral test at actual sea-going condition, which were performed on starboard and port sides with 10-20 rudder angle at service speed of 10 knots. The turning circle was much different at both of the turning of port and starboard which was longer at the starboard than at the port. In the zig-zag test results, the port and starboard was $10^{\circ}$ the first and second overshoot angles were $6.0^{\circ}$, $5.8^{\circ}$ and $6.3^{\circ}$, $7.1^{\circ}$ respectively and the first overshoot angles were $16.4^{\circ}$, $17.6^{\circ}$ when using $20^{\circ}$. Her maneuverability index T and N can be easily determined by using an analogue computer with the data obtained from the zig-zag tests where K is a constant representing the turning ability and T is a constant representing her quick response. In the zig-zag tests under $10^{\circ}$ or $20^{\circ}$ at rudder angle, the value K is 0.149. 0.123 sec- and T is 11.853 and 6.193 sec and angular velocity is $0.937^{\circ}/sec$ and $1.636^{\circ}/sec$. In the spiral test, the loop width was unstable at $+0.51^{\circ}$ and $-1.19^{\circ}$ around the midship of rudder, but the tangent line at $0^{\circ}$ was close to vertical. From the sea trial results, we found that she did comply with the present criterion in the standards of maneuverability of IMO.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.2
• /
• pp.201-230
• /
• 2010

With starting the industry of automobiles, railroads and mining, the legal principle of "erlaubtes Risiko" that began as a means of maintaining the revitalized world for the cause of social utility has interpreted as a system of negligence theory in the precedent while it has gained academic recognition. Yet in aircraft operation, which is one area of high technology, CAT which can be the cause of some accidents or events or thunderstorm with turbulence is an abnormal meteorological phenomenon with frequent change that cannot be monitored perfectly just as some patient with unstable condition and that cannot be ascertained about not only the possibility of its happening but also the degree of how big the accident is. Yet the use of jet current which has the possibility of CAT can be an act of high social utility where we not only drastically cut down on time fuel also guarantee the arrival and departure on schedule when landing in airports that have thunderstorm which does not appear as fatal risk. Although we could take some measures where we can predict and avoid the potential risk, easing the regular duty of care is necessary by applying the legal principles of permitted risk concerning the incidents and accidents caused by operating in areas with the risk of turbulence or CAT with the low probability by the reason of social utility.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2012

Recently, the government has been working feverously to save energy and reduce greenhouse gas emission by enacting Basic Act on Low Carbon Green Growth at the national level. Improving the insulation performance of building exterior and insulator can reduce the energy in the building sector. This study is about developing light-weight foamed concrete insulation panel that can be applied to buildings to save energy and to find the optimal condition for the development of insulation materials that can save energy by enhancing its physical, kinetic and thermal characteristics. Various experimental factors and conditions were considered in the study such as foam agent types (AES=Alcohol Ethoxy Sulfate, AOS=Alpha-Olefin Sulfonate, VS=Vegetable Soap, FP=Fe-Protein), foam agent dilution concentration (1, 3, 5%), and foam percentage (30, 50, 70%). Experiment results indicated that the surface tension of aqueous solution including foam agent, was lower when AOS was used over other foam agents. FP produced relatively stable foams in 3% or more, which produced unstable foams containing high water content and low surface tension when diluted at low concentration. Depending on foam agent types, compressive strength and thermal conductivity were similar at low density range but showed some differences at high concentration range. In addition, when concentrations of foam agent and foaming ratio increased, pore size increased and open pores are formed. In all types of foam agent, thermal conductivity were excellent, satisfying KS standards. The most outstanding performance for insulation panel was obtained when FP 3% was used.

• Journal of the Korean Institute of Gas
• /
• v.18 no.1
• /
• pp.46-51
• /
• 2014

The purpose of this paper is to study of the vehicle lamp manufacturing system composing ultrasonic waves connection process. Making lamp assembly plant, it was produced in the separate process as the injection molding, ultrasonic waves bonding, annealing in the constant temperature, lamp assembling and packing. But the improvement method producing the lamp was added with one-step process by one automation technique. As a result, welding with ultrasonic waves process, the method decreased the energy consumption and noise during ultrasonic waves welding. Therefore, this method used the mathematics modeling for checking validity, it selected the stability and suitable controller using transfer function of plant and bode chart. In this study, the $180^{\circ}$ revolution control system to turn injection part upside down was $M_{eq}\;lcos{\theta}(t)$ because of gravity influence. It effected to unstable condition a system. For solving this problem, it aimed the linearization and stabilization of system by elimination $M_{eq}\;lcos{\theta}(t)$ as applying Free-forward control technique.