• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.447-448
• /
• 2008

The goal of this study is to find flame dynamic behavior using a transverse fuel injection in a model combustor, and is to investigate main causes of unstable combustion in a liquid-fueled combustor. For transverse fuel injection into air cross flow, spray result shows similar tendency with Wu et al.[1998] until spray arrives at flame-holder. However, passing through flame-holder, fuel inflow into recirculation region of flameholder is not sufficient so it makes large difference between shear flame and recirculation flame behind flameholder. In combustion tests, the stable flame shows a kind of shear flames and low peaks of dynamic pressure frequencies. On the other hand, unstable flame shows periodic detached flame in recirculation zone and a strong peak of dynamic pressure frequency. The instability frequency is highly affected by influx air velocity, air temperature, equivalence ratio and wake or vortex shedding frequency behind the flameholder.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.53-68
• /
• 2014

The purpose of this study is to verify the relationships among innovative behavior, turnover intention, and job security. An additional purpose was to examine partial mediating effects on psychological ownership. The baseline of analyzing those relationships in this study is that the role of psychological ownership will be a mediator between job security and turnover intention as well as innovative behavior in the organization. To accomplish these purposes, a model was built among job security as predictor variable, the psychological ownership as mediating variable and turnover intention, and innovative behavior as criteria variables based on the studies conducted in the various areas. The 248 questionnaires surveyed from the area of DaeGu and Kyungbuk were used in the statistical analyses. The detail statistical techniques are such as descriptive analysis, reliability analysis, factor analysis, correlation analysis, and multi regression analysis. The results of the study show that job security had positively significant effect on turnover intention and innovative behavior. In addition, only the psychological ownership of organization-level thinking have partial mediating effects between job security and innovative behavior also job security and turnover intention. The results may indicate that the psychological ownership of organization-level thinking be a key factor to alleviate the turnover intention of employees and to encourage the innovative behavior during their works for the small-medium size companies showing the unstable job security.

• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.13-18
• /
• 2006

Ti-8Ta-3Nb, as a new biomaterial, was prepared by cast and swaging process. Their deformation behavior of Ti-8Ta-3Nb alloy has been characterized on the basis of its flow stress variation obtained from the true strain rate compression testing in the temperature of $700-900^{\circ}C$ and strain rate of $0.001-10\;s^{-1}$. At the strain rates lower than $0.1\;s^{-1}$ and the all temperature ranges which consist of two phase ${\alpha}+{\beta}$ as well as single ${\beta}$ phase fields, the flow curves show a small degree of flow softening behavior. In contrast, the shapes of the flow curves at other strain rates indicate unstable behavior. The shapes of the flow curves were similar in both as-cast and swaged specimen as well as in both ${\alpha}+{\beta}$ phase and ${\beta}$ phase. The flow stress data did not obey the kinetic rate equation over the entire regime of testing but a good fit has been obtained in the intermediate range of temperatures ($750-850^{\circ}C$). In this range, a stress exponent value of about 7.7 in as-cast specimens and about 6.2 in swaged specimens with an apparent activation energy of about 300 kJ/mol and about 206 kJ/mol respectively have been evaluated.

• Structural Engineering and Mechanics
• /
• v.34 no.3
• /
• pp.335-350
• /
• 2010

Out of plane behaviors of walls and infills are investigated in this paper, using rigid block concepts. Walls and infills are sometimes separated from top beams because of in plane movement of the walls and crumbling mortar layers under the top beams. Therefore, sufficient strength should be supplied to hold them against out of plane forces. Such walls are studied here under some real and scaled earthquakes, regarding their out of plane behavior. Influences of some reinforcements, connecting the walls to frames or perpendicular walls, are also studied. It is shown that unreinforced walls of regular sizes (3 m high and 4.5 m long) are normally unstable in the earthquakes. However, performing some reinforced bars that connect them to adjacent elements- frames or perpendicular walls - stabilizes them. Eventually, it is concluded that supplying 3 reinforced bars at 1/4, 2/4 and 3/4 of the panel's height stabilizes the walls in the assumed earthquakes. In this regard, for 20 cm and 35 cm thick walls ${\Phi}$18mm and ${\Phi}$20mm bars are to be used, respectively. For walls with other configurations, the forces and required areas of the reinforcements can be determined by the developed method of this paper.

• Journal of the Korean Society of Combustion
• /
• v.19 no.1
• /
• pp.29-38
• /
• 2014

This paper described an experimental investigations of combustion instability mode in a lean premixed dual swirl combustor for micro-gasturbine system. When such the instability occurs, a strong coupling between pressure oscillations and unsteady heat release excites a self-sustained acoustic wave which results in a loud, annoyed sound and may also lead a structural damage to the combustion chamber. The detailed period of flame behavior and heat release in combustion instability mode have been examined with high speed OH and CH-PLIF system and $CH^*$ chemiluminescence measurement, flame tomography with operated at 10 kHz and 6 kHz each. Experiment results suggest that unstable flame behavior has a specific frequency with 200 Hz and this frequency is accords with about 1/2 sub-harmonic of combustor resonance frequency, not fundamental frequency. This is very interesting phenomenon that have not reported yet from other previous works. Therefore, when a thermo-acoustic instability with Rayleigh criterion occurs, the fact that the period of heat release and flame behavior are different each other was proposed for the first time through this work.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.260-270
• /
• 1998

The field tests were performed to suggest the rational method for stability evaluation of soft clay. The behavior of settlement-displacement obtained by field monitoring system was to compare and analyze the results of the observationed method, and to investigate the complex behavior of soft clay with filling height. The results of this study are summarized as follows. 1. The horizontal displacement was suddenly increased when physical properties of soft clay showed maximum values and the part of the turning point. The values of these properties were available to the fundamental data for stability evaluation. The shear deformation appeared that difference of the horizontal displacement was maximum values. 2. Although the stability of embankment by step filling showed the unstable part over the failure standard line, the embankment was confirmed stable. So the evaluation of the stability of embankment is reasonable to use the inclination of curve than failure standard line. 3. The horizontal displacement and relative settlement were increased as same ratio at improvement ground. Estimation of shear deformation using Terzaghi's modified bearing capacity should consider the relations of embankment load and undrained shear strength at nonimprovement ground, and minimum safety factor is recommended to use larger than 1.2. 4. Excess pore water pressure was increased with increasing of filling height and decreased with maintain the filling height. The embankment was unstable when filling height was exceed the evaluation standard line, and the behavior of excess pore water pressure and horizontal displacement could use as a standard of judgement of the filling velocity control because their behavior were agree with each other.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.229-240
• /
• 2023

Instruments are installed in soft ground improvement projects to manage economic and safe construction. When analyzing data, the amount of settlement data over time can be used to understand the overall ground settlement behavior, but it is difficult to analyze the interrelatedness between measurement points. Therefore, to analyze the relative compressive settlement behavior between measurement points, the settlement amount and velocity were processed and defined as the mean settlement difference index (AS_i,j) and the slope difference index (SDI_i,j). Plotted in the mean settlement difference index - slope difference index (AS_i,j-SDI_i,j) coordinate system. As a result of the analysis of the relative compaction subsidence behavior between the measuring points, the relationship between the measuring points in the average subsidence difference index - slope difference index coordinate system moved to area 1 as the compaction was completed. By continuously plotting the movement path of the observation point in the corresponding coordinate system, the relative settlement behavior between the measurement points was analyzed, and it was possible to check whether the settlement behavior of the two measurement points was stable or unstable depending on the direction of the path.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2473-2481
• /
• 2013

The two characteristics of two-lane-and-two-way traffic flow are platoon and overtaking triggered by low-speed vehicle. It is crucial to develop a robust model which simultaneously generates the behaviors of platoon by low-speed vehicle and overtaking using opposite lane. Hence, a microscopic two-lane and two-way vehicle model was introduced (B. Yoon, 2011), which is based on CA (Cellular Automata) which is one of discrete time-space models, in Korea. While the model very reasonably explains the behaviour of overtaking low-speed vehicle in stable traffic flow below critical density, it has shortcomings to the overtaking process in unstable traffic flow above the critical density. Therefore, the objective of this study is to develope a vehicle model to more realistically explain overtaking process in unstable traffic flow state based on the model developed in the previous study. The experimental results revealed that the car-following model robustly generates the various macroscopic relationships of traffic flow generating stop-and-go traffic flow and the overtaking model reasonably explains the behaviors of overtaking under the conditions of both opposite traffic flow and stochastic parameter to consider overtaking in unstable traffic flow state. The vehicle model presented in this study can be expected to be utilized for the analysis of two-lane-and-two-way traffic flows more realistically than before.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.320-327
• /
• 2015

Although service robots in various fields are being commercialized, most of them have problems that depend on explicit commands by users and have difficulty to generate robust reactions of the robot in the unstable condition using insufficient sensor data. To solve these problems, we modeled mirror neuron and theory of mind systems, and applied them to a robot agent to show the usefulness. In order to implement quick and intuitive response of the mirror neuron, the proposed intention-response model utilized behavior selection networks considering external stimuli and a goal, and in order to perform reactions based on the long-term action plan of theory of mind system, we planned behaviors of the sub-goal unit using a hierarchical task network planning, and controled behavior selection network modules. Experiments with various scenarios revealed that appropriate reactions were generated according to external stimuli.

• Journal of Korean Academy of Nursing
• /
• v.30 no.1
• /
• pp.148-159
• /
• 2000

The purpose of this study was to test the theoretical model designed to explain juvenile delinquency by media violence. Data were collected through questionnaire survey over a period of 3 months. Subjects served for this study consisted of 537 adolescents including 217 delinquent adolescents and 320 student adolescents in Korea, sampled from Korean student population and delinquent adolescent population confined in juvenile correctional institutions, using proportional stratified random sampling method. In this study, exogeneous variable was family dynamic environment and endogeneous variables were character of adolescent including need satisfaction/ frustration, sociability, antisocial personality tendency, complaints of psychosomatic symptoms and depressive trend, juvenile delinquent behavior and media violence themes including the extent of interest in and exposure and modelling impulsiveness and modelling to media violence themes. A total of 18 instruments were used to operationalized concepts in this model. A validation study indicated that internal consistencies for the 18 instruments which the researcher used were reliable. The one month test-retest correlation for these instruments ranged from 0.54 to 0.88. Statistical methods employed were descriptive statistics and covariance structural modelling. In summarized conclusion, it was found that media violence served as the most contributor to juvenile delinquency by direct effect of 0.64(t=10.18). That is, as the adolescents have to be the higher extent of interest in and exposure and modelling impulsiveness and modelling to media violence themes, they will show the more frequency of delinquent behavior. The single most powerful contributor by total effect of 0.73(t=7.90) (direct effect=0.19, indirect effect=0.54) to the development of delinquent behavior identified in this study was a construct defining family dynamic environment. That is, as the adolescents had to be more unstable family dynamic environment, they became more frustrated to their psychological need, and revealed the more maladaptive personality pattern, consequently they behaved the higher misconducts such as juvenile delinquency through media violence.