• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1424-1430
• /
• 2007

Corrugated structural plate is ductile structural member which has high sectional properties compared with same thickness of plate. Corrugated plate resists the external forces by the combined action of retained soils and structures. Since it is easy to transport and assemblage of in-situ, the duration and cost of construction can be reduced. Corrugated plate structures, therefore, are widely used in culverts, hydro passages and simple bridges. RC culvert with supported by unstable soil layersin railway construction project of pohang${\sim}$samchuk has been replaced by corrugated plate culvert due to the reduction of construction duration and cost, especially the performance of behavior of settlement of ground. The structural analysis, design processes, and the economic advantages of the corrugated plate culvert are studied in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.900-905
• /
• 2004

Development of color printer, postal classification machine, ATM and so on requires higher moving performance of the flat belt. Skew of the flat belt running over misaligned roller has a bad effect on performances of media transport. The vibration of loose side of belt causes the escape of the belt from roller and the drop of velocity of driven roller after the start of driving roller revolution. The skew of flat belt is investigated by FEM and dynamic simulation. FEM results show parameters which affect the skew of belt and match with dynamic results qualitatively. The shape of loose side of belt can be found by dynamic simulation. Increase of the acceleration time and initial tension have diminished the unstable movement of the loose side of belt.

• Journal of the Korean Society of Visualization
• /
• v.9 no.1
• /
• pp.17-19
• /
• 2011

The bubble oscillations play an important role in ultrasonic cleaning processes. In the ultrasonic cleaning of semiconductor wafers, the cleaning process often damages micro/nano scale patterns while removing contaminant particles. However, the understanding of how patterns in semiconductor wafers are damaged during ultrasonic cleaning is far from complete yet. Here, we report the observations of the motion of bubbles that induce solid wall damage under 26 kHz continuous ultrasonic waves. We classified the motions into the four types, i.e. volume motion, shape motion, splitting or jetting motion and chaotic motion. Our experimental results show that bubble oscillations get unstable and nonlinear as the ultrasonic amplitude increases, which may exert a large stress on a solid surface raising the possibility of damaging microstructures.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.9-18
• /
• 1997

This paper is a study on the dynamic characteristics of truncated cone type squeeze film damper(SFD) bearing and rotor system. This model can alter the radial oil film gap which Is Important to the performance of rotor-bearing system and manufactured easily to change the shape concept of traditional circular type SFD bearing. In theoretical analysis, the oil film pressure distribution, the oil film force, the film damping coefficient and the eccentricity ratio, etc. were induced with regard to the film inertia effect. The film damping coefficients and optimum design parameters are calculated. When unbalance parameter U is greater than 0.2, the nonlinear vibration such as "Jump" phenomena appears in the vicinity of rotor critical speed. At this time, the increases of bearing parameter U, journal distance S, Reynolds number Re can control this unstable vibration. The experimental results show that SFD hearing and rotor system which are designed according to the design parameters in the stable region are operated stably in rotational speed 9,600rpm without nonsynchronous behavior.

• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.45-52
• /
• 1991

The purpose of a fatigue crack arrest desing is to prvent a fatigue fracture of machine and structure resulted from unstable crack growth. In all cases of load transfer to second elements such as stringers, doublers or flangers, crack arrest is possible; arrest occuring when the fatigue crack reaches the second element. In the present work, the possibility of crack arrest and the design criterion of fatigue crack arrest in the variable thickness plates are examined numericaiiy by using fatigue crack arrest thresthod $\Delta$K$_{th}$of SA-508 reactor vessel steel and stress intensity factor which was obtained in the previous work as a result of 3-dimensional finite element analysis for CT type variable thickness plates having discontinuous interface.e.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1198-1205
• /
• 2003

Most domestic fossil power plant have exceeded 100,000 hours of operation with the severe operating condition. Among the critical components of fossil power plant, high temperature steam pipe system have had a many problems and damage from unstable displacement behavior because of frequent start up and shut down. In order to prevent the serious damage and failure of the critical pipe system in fossil power plant, 3-dimensional displacement measurement system were developed for the on-line monitoring system. 3-D Measurement system was developed with using the LVDT type sensor and rotary encoder type sensor, this system was installed and operated on the real power plant successfully. In the future time, network system of on-line diagnosis for critical pipe will be designed.

• Journal of the military operations research society of Korea
• /
• v.32 no.1
• /
• pp.176-187
• /
• 2006

It is difficult to estimate missile flight trajectory since a ballistic missile velocity is highly fast and has inherent behavior such as corkscrew due to unstable descending. This paper describes a comprehensive analysis of the flight trajectory characteristics of ballistic missiles. Various missile flight ranges based the comprehensive flight trajectory characteristics are derived by an analytical approach. It is shown analytically that threat due to the flight characteristics is significantly increased with reducing maximum missile ranges. This work is basic research of the establishment of operational concept for the lower tier missile defense system implementation.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.7-10
• /
• 1990

In this paper the instability analysis of Inverter fed Induction motor drive system is performed by calculate the eigen value of the linearised equation which describe the behavior of the Induction motor. Inverter fed Induction motor drive system may become unstable at low speeds(frequencies) even though balanced, sinusoidal voltage are applied. Effect for the change of machine parameter and Inverter delay time are simulated by digital computer.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.991-997
• /
• 2000

The objective of this study is to examine the onset condition and the frequency characteristics of the low-frequency combustion oscillation in a surface burner. For this purpose, extensive parametric studies have been performed experimentally and the effects of size of each section, the equivalence ratio, and the entrance velocity on oscillatory behavior explored. The experimental results were discussed in comparison with the other combustors associated tilth the low-frequency combustion oscillation. The combustion mode is driven at high combustion rate by the lift of unstable flame near the lower limit of the combustible equivalence ratio. The oscillation frequency is dependent not on the burner geometry but on the equivalence ratio and the combustion load. Low-frequency combustion mode was formed to be divided into two different modes, named C1 and C2 respectively. Two modes occurred individually, simultaneously or transitionally according to the equivalence ratio and combustion load. The characteristics of low-frequency oscillation is different from each other depending on the type of combustors. The surface burner has also its own characteristics of low -frequency oscillation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.167-174
• /
• 2001

A shape resistant shell structure is an extremely efficient mechanical creation because it transmits forces mainly by in-plane forces, but at a certain load level it changes from a stable condition to an unstable condition or vise versa. The instability phenomenon of Geiger-type cable dome structure is generated due to the in-plane twisting near critical load level. Therefore the effect of bracing reinforcement is investigated for the Geiger-type model reinforced by bracing. The effect of initial imperfection is also studied since the structural instability behavior characteristic of shell-like structure is significantly sensitive according to the initial condition.