• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1709-1714
• /
• 2004

Pressurization system of a 50m unmanned airship was manufactured according to the detailed design. In this paper. the whole procedures including system design. simulation and fabrication were described. The fabricated part were ground tested to check compliances with design requirements. Ground tests include operational tests, leakage tests, endurace tests and low temperature environmental tests. Results shows pressurization system of a 50m unmanned airship meets design requirements. Currently. pressurization system is installed to the KARI airship, Via 50m and performance verification through the flight tests are being conducted.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.18-25
• /
• 2017

The use of unmanned combat systems is of interest for future battlefield. Advanced techniques are being actively studied to build fully autonomous unmanned systems. However, there are technical, ethical and legal limitations for the fully autonomous unmanned combat systems. In addition, a remote controlled system is necessary so far in order to prepare for situations where fully autonomous unmanned systems fail to function properly. Thus, a procedure of developing operational requirements in system level is proposed and interface requirements of unmanned combat vehicles for remote control are described in this study.

• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.8-13
• /
• 2015

In this paper, a simple algorithm is proposed to estimate wind speed and direction which can significantly improve the landing performance of an unmanned parafoil. The proposed algorithm is applied to flight test data along with other known algorithms and the results are compared and discussed. The proposed algorithm shows comparable performance while it can still be applied to the parafoil under control.

• 대한임베디드공학회논문지
• /
• 제3권4호
• /
• pp.244-250
• /
• 2008

This paper describes the design and implementation of an unmanned ground vehicle (UGV) and also estimates how well autonomous navigation and remote control of UGV can be performed through the optimized arbitration of several sensor data, which are acquired from vision, obstacle detection, positioning system, etc. For the autonomous navigation, lane detection and tracing, global positioning, and obstacle avoidance are necessarily required. In addition, for the remote control, two types of experimental environments are established. One is to use a commercial racing wheel module, and the other is to use a haptic device that is useful for a user application based on virtual reality. Experimental results show that autonomous navigation and remote control of the designed UGV can be achieved with more effectiveness and accuracy using the proper arbitration of sensor data and navigation plan.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.856-864
• /
• 2008

This paper describes a vehicle low speed driving assistant (VLDA) system that is composed of laser scanner. This vehicle is designed for following lead vehicle (LV) without driver's operation. The system is made up several component systems that are based on unmanned ground vehicle (UGV). Each component system is applied to use advanced safety vehicle developed to complete UGV system. VLDA system was divided into vehicle control system and obstacle detecting system. The obstacle detecting system calculate distance and angle of LV and transmit these data to vehicle control system using front, left and right laser scanners. Vehicle control system makes vehicle control values such as steering angle, acceleration and brake position and control vehicle's movement with steering, acceleration and brake actuators. In this research, we designed VLDA system like as low speed cruise control system and test it on real road environments.

• 항공우주시스템공학회지
• /
• 제3권4호
• /
• pp.35-40
• /
• 2009

The first purpose of this study is to develop a GCS(Ground Control System) by using RF(Radio Frequency) wireless communication equipments for UAV(Unmanned Aerial Vehicle). The second goal is to develop an antenna tracking system operating automatically. UAV receives flight data from a RF wireless system. So the role of antenna tracking system is very important to keep good communication state between UAV and GCS. GCS can check flight data and display a aviation state of UAV in real-time. The flight data displayed in real-time by GCS include the latitude, longitude, altitude, speed and so on. Experiments that measure a communication range and reliability are needed to develop a RF wireless communication system.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제7권5호
• /
• pp.189-194
• /
• 2018

무인화 기술은 전기, 전자, 기계, 인공지능 기술과 ICT 기술 등 다양한 기술들을 융 복합하는 대표적인 기술이다. 특히 지상 무인화 기술은 군사 분야에서 많은 연구 개발과 발전을 이루고 있으며 활용 영역을 확장하고 있다. 본 연구에서는 특허정보 분석을 위해 새로운 특허정보 분석 방법론을 제시하고, 지상 무인화 기술 관련 특허정보를 본 연구에서 제시한 특허정보 분석 방법을 이용하여 분석하였다. 핵심특허 및 기술을 추출하기 위한 특허정보 분석 프로세스는 6단계로 분석 대상 기술선정, 세부 기술 분류, 특허정보 수집, 특허정보 분석 방법 선정, 특허정보 분석, 마지막으로 핵심특허 및 핵심 기술 추출로 이루어 진다. 세부적으로 지상무인화 기술에 대한 기술 분류를 실시하고, 특허지수인 CPP와 IPC 코드 연결성 분석을 통해 지상 무인화 기술의 핵심기술과 핵심특허를 추출하였다. 제시된 특허정보 분석 방법을 이용한 특허정보 분석 결과는 다양한 분야의 기술에 적용하여 분석이 가능하고, 향후 연구개발 방향을 전망하는 자료로 활용할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.75-75
• /
• 2000

Recently, number of navigation system using GPS and other complementary sensors has been developed to offer high-position accuracy. In this paper, an integration of GPS and Dead-Reckoning, which consists of a fiber optical gyroscope and two high-precision wheel-motor encoders for a unmanned navigation system, is presented. The main objective of this integrated GPS/DR unmanned navigation system is to provide accurate position and heading navigation data continuously for autonomous mobile robot. We propose a method for increasing the accuracy of the estimated position of the mobile robot by its DR sensors, high-precision wheel-motor encoders and a fiber optical gyroscope. We used Kalman filter theory to combine GPS and DR measurements. The performance of GPS/DR navigation system is evaluated.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.498-509
• /
• 2010

In this paper, a waypoint guidance law Line Tracking algorithm is designed for testing an Unmanned Airship. In order to verify, we develop an autonomous flight control and test system of unmanned airship. The flight test system is composed FCC (Flight Control Computer), GCS (Ground Control System), Autopilot & Guidance program, GUI (Graphic User Interface) based analysis program, and Test Log Sheet for the management of flight test data. It contains flight test results of single-path & multi-path following, one point continuation turn, LOS guidance, and safe mode for emergency.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.395-405
• /
• 2024

This study provides a thorough examination of Unmanned Ground Vehicles(UGVs), focusing on crucial technologies and trends across major global markets. It includes an in-depth patent analysis revealing the dominant positions of the United States and the European Union in this field. Additionally, it underscores substantial advancements made by China, Japan, and Korea since 2010. Using Latent Dirichlet Allocation(LDA)-based patent text mining, the study identified key technology areas in UGV development, such as advanced control systems, navigation technologies, power supply mechanisms, and sensing and communication tools. Through linear regression analysis, the study predicted the future paths of these technology areas, offering important insights into the evolving world of UGV technology. The findings can provide strategic guidance for stakeholders in the defense, commercial, and academic sectors, pointing out the future directions in UGV advancements.