• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.64-70
• /
• 2021

Nowadays, there are significant interests in real-time remote control using wireless networks. In implementing real-time remote control, one important factor is delay performance of real-time control message. Especially, the technique to reduce jitter of delay is necessary in transmitting periodically real-time control message. In this paper, we proposed synchronized transmission to reduce jitter of delay, when real-time control message was transmitted through wireless networks. The proposed transmission kept synchronization between source node and wireless transmitter and controlled transmission instance to transmit real-tie control message with fixed delay in wireless networks. According to results of experiment in military unmanned vehicle system, the proposed transmission reduced jitter of delay as 32% as that of a non-employing case.

• Journal of Platform Technology
• /
• v.8 no.2
• /
• pp.32-43
• /
• 2020

The Unmanned Aerial Vehicle(UAV) system has been mainly used for military domains, but it also widely applied to used in the civilian domains. In civilian domains, low-cost and small-sized UAV systems are mainly applied in various industries. The software that operates UAV systems has a lot of common functions. However, even though there are many common functionalities of the software, changing the devices may cause a problem requiring software modification. These problems degrade interoperability, modularity and portability in UAV systems. In order to solve the problems, an Open System Architecture(OSA) has been proposed. In this paper, we propose a UAV system software architecture based on Future Airborne Capability Environment(FACE) standard. Our system can support UAV systems of various platforms in the civilian domains, which is supplied in small quantity batch production. And it has the advantages of software consolidation and portability. Finally, We describe the development and conformant methodology of the software based on the FACE standard using open development tools.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.295-299
• /
• 2023

In Korea, the birth rate is rapidly decreasing in the 21st century. Accordingly, if the current military service and personnel system are maintained, it will be difficult to maintain even the number of the Army reduced to 365,000. Nevertheless, the Army has a mission to protect the country from external aggression as the last bastion of national defense. To fulfill this mission, there are ways to improve the military service and personnel system, but there are ways to maximize individual combat power to create one warrior that is worth a hundred and overcome the insufficient number of troops through superior mobility to the enemy. This study studied how to solve the shortage of troops as well as strengthen combat power through a combined combat system that can maximize individual combat power and mobility by applying the latter concept, and further analyzed the future battle environment and suggested the developmental direction of the army's combined combat system.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.982-996
• /
• 2016

In this paper, new tethered aerial robots including roaming tethered aerial robots (RTARs) for radioactive material sampling and stationary tethered aerial robots (STARs) for environment monitoring are proposed to meet extremely-long-endurance missions of nuclear power plants. The flight of the proposed tethered aerial robots may last for a few days or even a few months as long as the tethered cable provides continuous power. A high voltage AC or DC power system was newly adopted to reduce the mass of the tethered cable. The RTAR uses a tethered cable spooled from the aerial robot and an aerial tension control system. The aerial tension control system provides the appropriate tension to the tethered cable, which is accordingly laid down on the ground as the RTAR roams. The STAR includes a tethered cable spooled from the ground and a ground tension control system, which enables the STAR to reach high altitudes. Prototypes of the RTAR and STAR were designed and successfully demonstrated in outdoor environments, where the load power, power type, operating frequency, and flight attitude of the RTAR and STAR were: 180 W, AC 100 kHz, and 20 m; and 300 W, AC or DC 100 kHz, and 80 m, respectively.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.675-678
• /
• 2016

최근 무인항공기 (Unmanned Aerial Vehicel, UAV)는 장점인 빠른 이동속도와 장착된 카메라를 이용하여 넓은 지역을 감시하기 위해서 활용되고 있다. 하지만, 조종사가 UAV를 직접 조종하여 넓은 지역을 비행하기에는 많은 비용이 발생한다. UAV가 자율적으로 넓은 지역을 비행하는 방법이 요구된다. 이 논문은 웨이포인트를 기반으로 UAV를 비행시키기 위한 Ground Control Station (GCS)의 구조를 제안한다. 비행할 웨이포인트는 위성항법시스템(Global Positioning System, GPS) 기반으로 설정하고 제안한 구조를 기반으로 다양한 임무 수행을 위해 다수의 비행 알고리즘을 정의하여 UAV를 비행시킨다. 부가적으로, 웨이포인트 기반으로 UAV를 비행시키기 위한 사용자 인터페이스도 소개한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.123-125
• /
• 2015

Wireless ad hoc network which is comprised of wireless nodes that have the limited communication range is utilized to monitoring disaster area, tracing object, and tactical system. But in the case of wireless node on the ground, a network performance decrease because wireless channel is affected from obstacle or the node deployment is restricted. In this paper, we consider wireless network based on UAV(Unmanned Aerial Vehicle) which has little spatial constraint and quickly deploy a position. We implement test-bed included ground nodes and UAV, and measure throughput and PDR(Packet Delivery Ratio) according to the usage of UAV. We show that network performance is improved by relaying data on UAV.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.35-41
• /
• 2009

A waypoint tracking algorithm(WTA) is designed for Unmanned Surface Vehicle(USV) in which water-jet system is installed for propulsion To control the heading of USV for waypoint tracking, the steering nozzle of water-jet need, to be controlled. Firstly, target heading is calculated by using the position information of waypoints input from the land control center. Secondly, the command for the steering nozzle of water-jet is calculated in real time by using the heading and the rate-of-turn( ROT) from magnetic compass, In this study, in order to consider the drift angle due to external disturbance such as wind and wave, the course of ground( COG) can be used instead of heading at higher speed than a certain value, To test the performance of newly-designed WTA, the tests were carried out in actual sea area near Gwang-an bridge of Busan. In this paper, the sea trial test results from WTA are analyzed and compared with those from manual control and those from commercial controller.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.109-119
• /
• 2013

An unmanned ground vehicle(UGV) today plays a significant role in both civilian and military areas. Predominantly these systems are used to replace humans in hazardous situations. To take unmanned ground vehicles systems to the next level and increase their capabilities and the range of missions they are able to perform in the combat field, new technologies are needed in the area of command and control. For this reason, we present war field simulator based on information fusion technology to efficiently control UGV. In this paper, we present the war field simulator which is made of critical components, that is, simulation controller, virtual image viewer, and remote control device to efficiently control UGV in the future combat fields. In our information fusion technology, improved methods of target detection, recognition, and location are proposed. In addition, time reduction method of target detection is also proposed. In the consequence of the operation test, we expect that our war field simulator based on information fusion technology plays an important role in the future military operation significantly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.291-297
• /
• 2019

The world's leading industrialized nations are improving their national science and technology capacity through the continuous expansion of national R&D investment and the improvement of performance in accordance with the trend of the fourth industrial revolution. As rapid technological development following technological convergence necessitates a preemptive response to a new paradigm, the importance of securing high technology that affects the national competitiveness is increasing day by day. Core technologies and future new technologies that affect national competitiveness can be seen as a measure to upgrade the nation's innovative capabilities. In particular, the core technologies and future new technologies to prepare for changes in a security environment and future battlefields are very important in the defense sector that develops weapons systems. In the defense sector, the core technologies based on the military weapons systems are identified, and future new technologies that use the best technologies of the private sector for national defense, not on the needs of develops weapons systems, are derived. This study examined the characteristics of core technology and future new technology of defense ground unmanned systems, conducted a comparative study through empirical analysis, and concluded that strategic technology planning and research and development are needed according to the core technology and future new technology characteristics.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.123-127
• /
• 2020

In order to obtain the overall fire line information of medium and large forest fires at night, the ground control system was developed to determine whether forest fires occurred through real-time video clips and to calculate the location of the forest fires determined using the location of drones, angle information of video cameras, and altitude information on the map to reduce the time required for regular video matches obtained after the completion of the mission. To verify the reliability of the developed function, the error distance of the aiming position information of the flight altitude star and the image camera was measured, and the location information within the reliable range was displayed on the map. As the function developed in this paper allows real-time identification of multiple locations of forest fires, it is expected that overall fire line information for the establishment of forest fire extinguishing measures will be obtained more quickly.