• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.311-317
• /
• 2003

일정변형속도 압밀시험(CRS)을 이용하여 점성토의 팽창지수 산정 특성을 조사하였다. CRS압밀시험에서 재하단계의 변형률은 0.05%/min와 0.03%/min을 적용하였으며, 재하단계에서는 재하단계의 변형속도의 1/1, l/5, 1/10, 1/15에 해당하는 변형속도를 적용하였다. 표준압밀시험과 비교하여 팽창지수를 산정한 결과 1/5∼1/10정도의 변형속도를 적용했을 때 서로 유사한 팽창지수가 산정되었다. 또한, 유효응력과 과잉간극수압비의 관계에서 교차점이 존재함을 알았으며 이 교차점을 기준으로 변형속도에 의존적인 부분과 비의존적인 부분이 존재함을 알 수 있었다.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.781-789
• /
• 1988

본 연구에서는 용접성이 좋고 강도도 적당하며 부식에 대한 저항성이 좋아 해 양구조물 및 용접구조용재로서 널리 사용되고 있는 5083-H113 Al 합금을 준비하고 이 재료의 균열형태에 따른 피로균열진전거동을 밝히기 위하여 관통균열과 포면균열의 진 전거동에 미치는 응력비의 영향을 균열닫힘과 함께 검토하였다.

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.461-468
• /
• 2002

Computer simulation is essential to design the suspension elements of railway vehicle. By computer simulation, engineers can assess the feasibility of the given design factors and change them to get a better design. But if one wishes to perform complex analysis on the simulation, such as railway vehicle dynamic, the computational time can become overwhelming. Therefore, many researchers have used a surrogate model that has a regression model performed on a data sampling of the simulation. In general, metamodels(surrogate model) take the form y($\chi$)＝f($\chi$)＋$\varepsilon$, where y($\chi$) is the true output, f($\chi$) is the metamodel output, and is the error. In this paper, a second order polynomial equation is used as the RSM(response surface model) for high speed train that have twenty-nine design variables and forty-six responses. After the RSM is constructed, multi-objective optimal solutions are achieved by using a nonlinear programming method called VMM(variable matric method) This paper shows that the RSM is a very efficient model to solve the complex optimization problem.

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.839-856
• /
• 2013

Metallic annular discs with their outer boundary fully constrained are studied with newly derived semi-analytical solutions for the effects of thickness variations under thermal loading and unloading. The plane stress and axisymmetric assumptions were adopted, and the thickness of the disk depends on the radius hyperbolically with an exponent n. Furthermore, it is assumed that the stress state is two dimensional and temperature is uniform in the domain. The solutions include the elastic, elastic-plastic and plastic-collapse behavior, depending on the values of temperature. The von Mises type yield criterion is adopted in this work. The material properties, Young's modulus, yield stress and thermal expansion coefficient, are assumed temperature dependent, while the Poisson's ratio is assumed to be temperature independent. It is found that for any n values, if the normalized hole radius a greater than 0.6, the normalized temperature difference between the elastically reversible temperature and plastic collapse temperature is a monotonically decreasing function of inner radius. For small holes, the n values have strong effects on the normalized temperature difference. Furthermore, it is shown that thickness variations may have stronger effects on the strain distributions when temperature-dependent material properties are considered.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1086-1092
• /
• 2002

Computer simulation is essential to design the suspension elements of railway vehicle. By computer simulation, engineers can assess the feasibility of a given design factors and change them to get a better design. But if one wishes to perform complex analysis on the simulation, such as railway vehicle dynamic, the computational time can become overwhelming. Therefore, many researchers have used a mega model that has a regression model made by sampling data through simulation. In this paper, the neural network is used a mega model that have twenty-nine design variables and forty-six responses. After this mega model is constructed, multi-objective optimal solutions are achieved by using the differential evolution. This paper shows that this optimization method using the neural network and the differential evolution is a very efficient tool to solve the complex optimization problem.

• Steel and Composite Structures
• /
• 제19권3호
• /
• pp.735-757
• /
• 2015

Composite bonding steel plate (CBSP) is a newly developed type of structure strengthened technique applicable to the existing RC beam. This composite structure is applicable to strengthening the existing beam bearing high load. The strengthened beam consists of two layers of epoxy bonding prestressed steel plates and the RC beam sandwiched in between. The bonding enclosed and prestressed U-shaped steel jackets are applied at the beam sides. This technique is adopted in case of structures with high longitudinal reinforcing bar ratio and impracticable unloading. The prestress can be generated on the strengthening steel plates and jackets by using the CBSP technique before loading. The test results of full-scale CBSP strengthened beams show that the strength and stiffness are enhanced without reduction of their ductility. It is demonstrated that the strain hysteresis effect can be effectively overcome after prestressing on the steel plates by using such technique. The applied plates and jackets can jointly behave together with the existing beam under the action of epoxy bonding and the mechanical anchorage of the steel jackets. The simplified formulas are proposed to calculate the prestress and the ultimate capacities of strengthened beams. The accuracy of formulas was verified with the experimental results.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 추계학술대회
• /
• pp.227-232
• /
• 2002

Enormous flocks by the reduced life cycle of products caused by the technological innovation if later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• 대한안전경영과학회지
• /
• 제5권1호
• /
• pp.33-43
• /
• 2003

Enormous stocks by the reduced life cycle of products caused by the technological innovation in later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.103-106
• /
• 2006

This study investigates spalling properties of 60MPa class, high performance concrete, made with the various influential parameters, such as, blaine of cement, mineral admixture and polypropylene(PP) fiber contents. Totally 21 parameters of ${\phi}100{\times}200mm$ in size was fabricated; three specimens for variance in blaine of cement, 4 specimens for combination of mineral admixture type, along with 0.05, 0.1, 0.15% of fiber adding ratio. After that, one hour unloading fire test was conducted, and then spalling appearance and spalling degree of specimens was examined. Test showed that a specimen made with high blaine of cement(H) improved early strength but exhibited similar value to a specimen made with low blaine(L) at the age of 28 days, thus indicating comparable spalling appearance. In conclusion, spalling easily occur in higher strength and smaller particle shape of cement and mineral admixture.

• Smart Structures and Systems
• /
• 제20권6호
• /
• pp.739-757
• /
• 2017

The main goal of this study is to investigate the hysteretic behavior of polyurethane rubber springs in compression with and without precompression. The precompression is introduced to provide rigid force in the behavior, and thereby a precompressed rubber spring can be used for a restoring element. For the goal, this study prepares nine rubber springs for three suites which are all cylindrical in shape with a hole at the center. The rubber springs in each suite have different dimensions of diameter and length but have similar shape factors; thus, they are designed to have a similar compressive stiffness. Three rubber springs from the nine are tested with increasing compressive strain up to 30% strain to investigate the behavior of the rubber springs without precompression as well as the effect of the loading strain. The nine springs are compressed up to 30% strain with increasing precompressive strain from 0 to 20% at increments of 5%. The study analyzes the effective stiffness and damping ratio of the rubber springs with and without precompression, and the rigid force of the precompressed rubber springs is discussed. Finally, this study suggests a regression method to determine the minimum required precompression to eliminate residual strain after unloading.