• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.29-32
• /
• 2002

In previous study, the decrease and recovery of total stiffness in welded structure was discussed on the basis of experimental examination through tensile loading and unloading test of welded specimen. The recovery of structure stiffness was caused by the release of welding residual stress through mechanical loading. In this study, analysis model that is indispensable for the effective application of MSR method was established on the basis of test and measurement result. Thermal elasto-plastic analysis for welding process was performed by non- coupled analysis. Analysis results of welding process were transfer to elasto-plastic model for tensile loading & unloading by restart technique. In elasto-plastic analysis model for mechanical loading & unloading, hardening appearance of weld metal was considered by rezoning technique and tying technique was used for JIG condition of test machine.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2007년도 춘계학술발표회 논문집
• /
• pp.80-84
• /
• 2007

• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.519-529
• /
• 2021

In coal mining activities, the abutment stress of the coal has to undergo cyclic loading and unloading, affecting the strength and seepage characteristics of coal; additionally, it can cause dynamic disasters, posing a major challenge for the safety of coal mine production. To improve the understanding of the dynamic disaster mechanism of gas outburst and rock burst coupling, triaxial devices are applied to axial pressure cyclic loading-unloading tests under different axial stress peaks and different pore pressures. The existing empirical formula is use to perform a non-linear regression fitting on the relationship between stress and permeability, and the damage rate of permeability is introduced to analyze the change in permeability. The results show that the permeability curve obtained had "memory", and the peak stress was lower than the conventional loading path. The permeability curve and the volume strain curve show a clear symmetrical relationship, being the former in the form of a negative power function. Owing to the influence of irreversible deformation, the permeability difference and the damage of permeability mainly occur in the initial stage of loading-unloading, and both decrease as the number of cycles of loading-unloading increase. At the end of the first cycle and the second cycle, the permeability decreased in the range of 5.777 - 8.421 % and 4.311-8.713 %, respectively. The permeability decreases with an increase in the axial stress peak, and the damage rate shows the opposite trend. Under the same conditions, the permeability of methane is always lower than that of helium, and it shows a V-shape change trend with increasing methane pressures, and the permeability of the specimen was 3 MPa > 1 MPa > 2 MPa.

• 대한치과교정학회지
• /
• 제30권6호
• /
• pp.731-738
• /
• 2000

본 연구의 목적은 재생된 니켈-티타늄 호선의 3점 굴곡물성의 변화를 조사하여, 임상적으로 니켈-티타늄 호선을 재생하여 사용하는 것이 타당한지를 알아보는 것이다. 4종의 니켈-티타늄 호선(Align, NiTi, Optimallo, Sentalloy)을 처리전(T0: 대조군)과 인공타액에 4주간 처리한 군(T1), 그리고 인공타액 처리 후 가압증기 멸균소독한 군(T2)으로 구분하여 3점 굴곡실험을 하였다. 3mm 변형시의 loading force, unloading force, hysteresis와 1mm 변형시의 loading, unloading force, stress hysteresis의 변화를 관찰하여 다음과 같은 결과를 얻었다. 1. Align은 재생 (T2)후에 3mm 변형시의 loading force, unloding force가 통계적으로 유의성 있게 증가하였다(loading force: p,0.05, unloading force:p<0.01). NiTi, Optimmalloy, Sentalloy에서는 통계적으로 유의성 있는 차이가 보이지 않았다. 2. Align은 재생(T2)후에 hysteresis가 통계적으로 유의성 있게 감소하였다(p<0.01). NiTi, Optimmalloy, Sentalloy에서는 통계적으로 유의성있는 차이가 보이지 않았다. 3. 모든 호선에서 1mm 변형시의 loading force는 재생(T2)후에 통계적으로 유의성있는 차이를 보이지 않았다. 4. Align은 재생(T2)후에 1mm 변형시의 unloading force가 통계적으로 유의성있게 증가하였다(p<0.05). NiTi, Optimmalloy, Sentalloy에서는 통계적으로 유의성있는 차이가 보이지 않았다. 5. Align의 loading force와 unloading force는 T1과 T0는 통계적으로 유의한 차이가 없었으며, T2와 T0사이에 유의성 있는 차이가 있었다(각각 p<0.05, p<0.01). 6. Align은 T1에서 pseudoelasticity가 감소하고, T2에서는 pseudoplasticity와 pseudoelasticity가 감소하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.555-556
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.617-618
• /
• 2009

• 전기의세계
• /
• 제41권3호
• /
• pp.45-50
• /
• 1992

완전비접촉부상, 비접촉구동을 실현하는 크린룸용 자기부상반송시스템을 소개하였다. 이 시스템은 스테이션과 각 프로세스장치 사이의 loading/unloading에는 인간이 개입하지만, 스테이션과 각 프로세스장치를 직접 접속하고 loading/unloading도 자도화하면 무인의 완전 무진자동반송시스템을 실현할 수 있을 것이다. (이와같은 문제점을 개선시킨 시스템을 Sumitomo가 개발하여 발효하였고 이에 대해서는 참고문헌를 참고하기를 바란다).

• Journal of Welding and Joining
• /
• 제5권2호
• /
• pp.44-52
• /
• 1987

The fracture toughness, $J_{IC}$ of high frequency electric resistance welded steel pipe for smooth and side-grooved CT specimen was evaluated by unloading compliance method. The crack growth, .${\delta}a$ was obtained from the equation of Donald and Saxena & Hudak, and $J_{IC}$ was determined from the curve of J-${\delta}a$ relations. The crack growth on the experiment using unloading compliance method is underestimated as compared with ${\delta}a$ measured directly by the SEM, so the reliability of $J_{IC}$ from saxena & Hudak equation is large than that from Donald. The $J_{IC}$ value of side-grooved CT Specimen is estimated less than that of smooth, and this is the effect of the side-groove, the shear-lip of crack tip and the reduction of crack tunnelling phenomena.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.178-186
• /
• 1997

The purpose of this study is to evaluate the J-R curve characteristics for the 5083 aluminum alloy weldment by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agrees well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The exponential correlation of the J-R curve for the 5083 aluminum alloy base metal by the load ratio analysis is J = 93.88 ${\Delta}{\alpha}^{0.375}$. That for the weld metal and HAZ is J = 69.87 ${\Delta}{\alpha}^{0.389}$ and J = 70.59 ${\Delta}{\alpha}^{0.359}$ respectively. The J-R curve obtained by the ASTM unloading compliance method is overpredicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load displacement curve without particular crack measurement equipment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.262-267
• /
• 2004

The unloading compliance method is the most commonly used method to evaluate the fracture resistance characteristics of a material. In dynamic loading condition, the direct current potential drop(DCPD) method has been used because the unloading compliance method can not be applied due to the discontinuity of loading. However, even in the dynamic test using DCPD method, there is a problem that the voltage drops sharply on the initiation of crack. For the reason metioned above, the normalization method was suggested on ASTM E 1820 which is revised recently, as a new method to evaluate the dynamic fracture resistance characteristic. The nomalization method can be used to obtain a fracture resistance curve directly from a load-load line displacement. In this study, we obtained two fracture resistance curves from static test of welding part of nuclear piping both by unloading compliance and nomalization method. The two curves were almost same each other, so the adaptability of the nomalization method has been proved. We conducted a dynamic fracture resistance test for the same material. The fracture resistance curve from the dynamic test was obtained by normalization method and compared to that of the static test result.