• Journal of Crop Science and Biotechnology
• /
• v.10 no.1
• /
• pp.33-38
• /
• 2007

Nitrogen management at the panicle initiation stage(PI) should be fine-tuned for securing a concurrent high yield and high quality rice production. For calibration and testing of the recommendation models of N topdressing rates at PI for target grain yield and protein content of rice, three split-split-plot design experiments including five rice cultivars and various N rates were conducted at the experimental farm of Seoul National University, Korea from 2003 to 2005. Data from the first two years of experiments were used to calibrate models to predict grain yield and milled-rice protein content using shoot fresh weight(FW), chlorophyll meter value(SPAD), and the N topdressing rate(Npi) at PI by stepwise multiple regression. The calibrated models explained 85 and 87% of the variation in grain yield and protein content, respectively. The calibrated models were used to recommend Npi for the target protein content of 6.8%, with FW and SPAD measured for each plot in 2005. The recommended N rate treatment was characterized by an average protein content of 6.74%(similar to the target protein content), reduced the coefficient of variation in protein content to 2.5%(compared to 4.6% of the fixed rate treatment), and increased grain yield. In the recommended N rate treatments for the target protein content of 6.8%, grain yield was highly dependent on FW and SPAD at PI. In conclusion, the models for N topdressing rate recommendation at PI were successful under present experimental conditions. However, additional testing under more variable environmental conditions should be performed before universal application of such models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.283-295
• /
• 2016

The purpose of this study is to analyze the conditions of disability facilities in universities and to improve disability facilities for disabled students. First, we selected six universities in Jeollabukdo and categorized their accommodations into exterior connection facilities, interior facilities, sanitation facilities, guidance facilities, and other facilities. We evaluated their fidelity to guidelines on accommodations under the convenience enhancement act for students with disabilities. The physical environment of the universities generally did not fit the guidelines, and they did not provide an appropriate environment for students because of inconvenient utilization and lack of management, even though they were equipped. Universities should make a greater effort to improve and expand the accommodations to establish a consumer-centered higher-education environment. This can be done by universal design and enhancing the fidelity for an advanced higher-education environment and students with disabilities.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1057-1067
• /
• 2005

In the modem society, people try to represent and protect their traditional arts in aesthetic way along with the global society. The proposal of this thesis is about the fashion illustration that has adopted the folklike formative arts. 1 prefer the formative character rather then the universal character and I would like to use of folk paintings far the fashion illustration. Because the formative character of folk paintings is very expressional, we are able to draw a fashion illustration in easy, new, creative and less difficult way. The fashion illustration has to be a specialized field from the formative arts, and we need to study in a new way as well. We draw fashion illustration through the understanding of folk paintings and the study of analysis in formative. As a result of this study, we could draw a fashion illustration which is very abstract, exaggerative and simple. We also could expect the free hand drawing lines on this illustration. In these fashion illustrations, the human bodies let us fret the artists' tense, speed, and power. According to the important character of folk painting, which is the beauty of color, these fashion illustrations have expressed more color intensive. In the falk paintings there is a kind of rules to make color order, so the fashion illustrations that we drew have the bright and clear color combination. Because the folk paintings shouldn't be the artistic but should be the realistic, the fashion illustrations concentrate on the real subject. It is very natural looking that use the natural dyes in the fashion illustrations. According to this kind of art task, fashion illustration will be a certain part of the illustration in the modem society.

• Journal of Information Management
• /
• v.36 no.2
• /
• pp.125-151
• /
• 2005

The eight types of Korean bibliographic information of biology and life science are included in PubMed that serves universal medical bibliographic information. Other domestic bibliographic information are served on its own format at different organizations. To fulfill the CCBB homepage user's request that it is necessary that integration of bibliographic service for quick acquisition of research information, we intends to construct metadata registry and service about bibliographic information of biology and life science. This paper describes the design and implementation of bibliographic information network prototype for biology and life science that can be used to share latest research result, seminar presentation data, research note, and research paper etc as well as to exchange information between researchers through Open Archiving Community.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.19-27
• /
• 2012

RUSLE(Revised Universal Soil Loss Equation) has been widely used to estimate the soil loss amount of watersheds from rainfall erosivity, soil erodibility, topographic features and cropping management condition. Rainfall erosivity is the most dominant and sensitive factor among these so that the determination of reliable rainfall erosivity is essential to estimate the soil loss of watershed. Since there has been no criterion to determine the rainfall erosivity in Korea, the empirical values, determined from the relation between the annual average rainfall and erosivity or suggested by TBR(Transport Research Board), have been used for designing the erosion control structure and controlling the soil erosion for watersheds. In this study, the procedure for estimating the rainfall erosivity using frequency analysis is proposed. The most fitted distribution function, with calculated rainfall erosivities with various frequencies and durations, has been also selected. The suggested procedure can be used to estimate the optimal value of rainfall erosivity for RUSLE in order to design soil erosion structures and control the soil erosion in watersheds effectively.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.3
• /
• pp.158-161
• /
• 2012

PURPOSE. The aim of the present study was to evaluate if a smaller morse taper abutment has a negative effect on the fracture resistance of implant-abutment connections under oblique compressive loads compared to a conventional abutment. MATERIALS AND METHODS. Twenty morse taper conventional abutments (4.8 mm diameter) and smaller abutments (3.8 mm diameter) were tightened (20 Ncm) to their respective implants ($3.5{\times}11$ mm) and after a 10 minute interval, implant/abutment assemblies were subjected to static compressive test, performed in a universal test machine with 1 mm/min displacement, at $45^{\circ}$ inclination. The maximum deformation force was determined. Data were statistically analyzed by student t test. RESULTS. Maximum deformation force of 4.8 mm and 3.8 mm abutments was approximately 95.33 kgf and 95.25 kgf, respectively, but no fractures were noted after mechanical test. Statistical analysis demonstrated that the evaluated abutments were statistically similar (P=.230). CONCLUSION. Abutment measuring 3.8 mm in diameter (reduced) presented mechanical properties similar to 4.8 mm (conventional) abutments, enabling its clinical use as indicated.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.218-224
• /
• 2020

PURPOSE. The objectives of this study were to evaluate the fracture strength and fracture patterns of provisional crowns fabricated from different materials and techniques after receiving stress from a simulated oral condition. MATERIALS AND METHODS. A monomethacrylate-based resin (Unifast Trad) and a bis-acryl-based (Protemp 4) resin were used to fabricate provisional crowns using conventional direct technique. A milled monomethacrylate resin (Brylic Solid) and a 3D-printed bis-acrylate resin (Freeprint Temp) were chosen to fabricate provisional crowns using the CAD/CAM process. All cemented provisional crowns (n=10/group) were subjected to thermal cycling (5,000 cycles at 5°-55℃) and cyclic occlusal load (100 N at 4 Hz for 100,000 cycles). Maximum force at fracture was tested using a universal testing machine. RESULTS. Maximum force at fracture (mean ± SD, N) of each group was 657.87 ± 82.84 for Unifast Trad, 1125.94 ± 168.07 for Protemp4, 953.60 ± 58.88 for Brylic Solid, and 1004.19 ± 122.18 for Freeprint Temp. One-way ANOVA with Tamhane post hoc test showed that the fracture strength of Unifast Trad was statistically significantly lower than others (P<.01). No statistically significant difference was noted among other groups. For failure pattern analysis, Unifast Trad and Brylic Solid showed less damage than Protemp 4 and Freeprint Temp groups. CONCLUSION. Provisional crowns fabricated using the CAD/CAM process and the conventionally fabricated bis-acryl resins exhibited significant higher fracture strength compared to conventionally fabricated monomethacrylate resins after the aging regimen. Therefore, CAD/CAM milling and 3D printing of provisional restorations may be good alternatives for long term provisionalization.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.107-115
• /
• 2011

The line-telemetry data processing system is necessary for monitoring the status of each onboard systems of KSLV-I upper stage during the ground tests and launch preparation. The mission of line-telemetry system is to provide reference telemetry data and to monitor the status of upper stage. The line-telemetry data processing system consists of a PCM acquisition/processing server, a system management server, and 9 monitoring consoles. In this paper, we will describe the overview of onboard remote measurement system, the design of the line-telemetry data processing system, anomaly setup information for indicating alarm signal in case of abnormal occurrence, and the result of the ground test and flight test.

• Journal of Distribution Science
• /
• v.15 no.3
• /
• pp.49-60
• /
• 2017

Purpose - The aims of this study are follows. We investigated to find out how country image and brand image affect the consumer perceived value, consumer attitude, and purchase intention of foreign infant foods in China. Especially, we focused on investigate for the moderating role of consumer knowledge between national image, brand image and consumer perceived value of foreign infant foods in China. Research design, data, and methodology - This study analyzed the effect of national image and brand image on purchase intention through consumer perceived value and consumer attitude. This study collected data for empirical analysis of Chinese consumers who have been purchase experience infant foods in China. 256 copies of questionnaire data were used for substantial analysis. Before testing the hypothesis, factor analysis was conducted to test the construct validity of measurement items. Hypotheses about effects between variables were verified using structural equation modeling analysis and hierarchical regression analysis. Results - First, the country image had a positive effect on consumer perceived value of foreign infant foods. Second, the brand image had a positive effect on consumer perceived value of foreign infant foods. Third, the consumer perceived value had a positive effect on consumer attitude. Fourth, the consumer attitude had a positive effect on purchase intention. Fifth, the consumer knowledge was moderating roles between brand image and consumer perceived value of foreign infant foods. However, the consumer knowledge did not effect of moderating between country image and perceived value of consumers. Conclusions - First, the impact of country image and brand image on consumer perceived value of foreign infant foods in China can be seen as a universal psychology of consumers who trust pure foreign products such as high quality, technology, etc. Second, consumer perceived value of foreign infant foods has a positive effect on consumer attitude, and this attitude is leading to purchase intention. Third, the consumer knowledge between brand image and perceived value acts as a moderating variable. It means that the consumer's knowledge can shape the perception of the brand image more strongly.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.45-49
• /
• 2010

This paper presents the study on multi-beam large aperture antenna systems for a satellite payload. Multi-beam large antenna provides the universal communication and broadcasting services to personal portable terminals. The hybrid antenna composed of a large reflector and a feed array forms multi-beams. The feed cluster consists of a group of feed elements and each element should be optimized for the appropriate amplitude and phase. The optimization progress for amplitude and phase was performed by GO (Geometrical Optics) and PO (Physical Optics) method. The number of feed elements as well as the power level per element were also optimized to meet the required EIRP (Effective Isotropically Radiated Power). In conclusion, 30m-class reflector and twenty five elements for fifteen beams over Korean Peninsula were designed through the optimization process.