• 제목/요약/키워드: Universal Mechanism

검색결과 128건 처리시간 0.027초

보편적서비스 지원제도 비교연구 (An International Comparison Study of Universal Service Support Mechanisms and Duplications)

  • 변재호
    • 한국통신학회논문지
    • /
    • 제33권5B호
    • /
    • pp.356-363
    • /
    • 2008
  • 1983년 미국에서 보편적서비스 지원을 위한 기금제도(USF: Universal Service Fund)가 도입된 이래 각국 정부는 저렴한 요금으로 모든 국민들이 기본적인 통신서비스를 제공받을 수 있도록 보편적서비스 지원제도를 운영하고 있다. 국내에서도 2000년 이래 보편적서비스 지원제도가 도입되었고, 최근에 제도개선논의가 활발히 전개되고 있다. 본고에서는 주요국의 보편적서비스 손실금 지원제도를 비교분석하고 국내 제도 개선시 시사점을 찾아보고자 한다.

주요선진국의 보편적 서비스 정책분석과 우리나라의 개선방향 (An Analysis on the Universal Services Policy of Major Developed countries and Improvement Direction in Korea)

  • 권오성
    • 기술혁신학회지
    • /
    • 제3권3호
    • /
    • pp.18-35
    • /
    • 2000
  • Universal service policy is the core of telecommunications policy and, therefore, in many countries, governments have been accomplished universal service as the critical goal of telecommunications policy. In the past when the market was under monopoly, the monopolist had the responsibility of supplying for universal service, whereas supply cost complemented through internal assistance. From 1998 when WTO basic telecommunications negotiation took effect, however, telecommunications markets fully opened, it was impossible to supply of universal service under the past system. Therefore, governments of major countries are trying to renew laws and institutions for policies compatible with competition environments. In this paper, I analyse and compare major countries' policies for the universal services and try to find out policy implication for Korea.

  • PDF

Design of a Novel Polishing Tool Mechanism with 3-axis Compliance

  • Gi-Seong Kim;Han Sung Kim
    • 한국산업융합학회 논문집
    • /
    • 제26권6_1호
    • /
    • pp.993-999
    • /
    • 2023
  • In this paper, a novel polishing tool mechanism with 3-axis compliance is presented, which consists of 2-axis rotational and 1-axis linear compliances in series. The 2-axis rotational compliance mechanism is made up of four cantilever beams for adjusting rotational stiffness and one flexure universal joint at the center for constraining the z-axis deflection. The 2-axis rotational compliance can mechanically adjust the polishing tool to machined surfaces. The polishing press force can be simply controlled by using a linear spring along the z-axis. The 2-axis rotational and 1-axis linear compliance design is decoupled. The stiffness analysis of the 2-axis compliance mechanism was performed based on link compliance matrix and rigid body transformation. A 3-axis polishing tool was designed by configuring the 2-axis compliance mechanism and one linear spring.

홈 네트워크 미들웨어 운영 프론토콜 메커니즘에 관한 연구 (Middleware Operating Mechanism of a Universal Home Network Bridge)

  • 전세호;최은미
    • 한국IT서비스학회:학술대회논문집
    • /
    • 한국IT서비스학회 2006년도 추계학술대회
    • /
    • pp.346-351
    • /
    • 2006
  • 유비쿼터스 환경에서의 일반 사용자를 위한 흠 네트워크의 실현은 다양한 가전 제품군의 홈 네트워크 미들웨어들이 표준화되고 상용 장비에도 장착이 되어 실용화된다. 흠 네트워크 환경에서 UpnP (Universal Plug and P1ay) HAVI (Home audio/video interoperability) HNCP(Home Network Control Protocol)등과 같은 개별 단체 표준 미들웨어들을 탑재하고 있는 이종 정보가전기기들 간의 상호연동성을 제공하고,홈 네트워크 미들웨어들을 쉽게 수용하기 위해서 Universal Middleware Bridge 시스템 규격을 ITA 표준안에서 정의하였다. TTA의 Universal Middleware Bridge(UMB)를 표준화로 제안되고 있는 범용 미들웨어 브릿지(UMB)는,SOAP/HTTP 기반의 UMB 메시지 전송/수신 기능을 가지고 있는 Universal Middleware Bridge Core(UMB-C)와 접속 설정 기능과 UMB 메시지를 수신,해석,생성,전송하는 기능을 가지고 있는 Universal Middleware Bridge Adaptor(UMB-A)로 구성 된다. UMB 메시지는 3가지 범주로 분류된 메커니즘이 있다. 첫 번째는 미들혜어의 접속과 해제에 관련된 메커니즘이고,두 번째는 장치 접속/해제에 관한 메커니즘이며,세 번째는 장치에 대한 제어/감시/이벤트에 관한 메커니즘이 있다. 본 논문에서는 미들웨어 운영 메커니즘에 서비스 품질 패키지,경고 메시지에 대한 메커니즘을 추가 설계하였다.

  • PDF

만능형 머시닝센터의 진동실험 및 절삭안정성 예측 (Vibration Experiment and Stability Prediction of a Universal Machining Center)

  • 이신영;김종원
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2004년도 추계학술대회 논문집
    • /
    • pp.219-224
    • /
    • 2004
  • There have been many researches on machine tool vibration and chatter to obtain assessment procedure and more productivity. In this paper chatter limit is predicted on a universal machining center which used a parallel mechanism. The prediction method uses the combination of structural dynamic characteristics and cutting dynamics. So the dynamic characieristics were obtained by vibration experiments. We showed the unstable cutting conditions, and from them we could plot the unstable borderlines.

  • PDF

병렬 운동 기구의 미끄럼 볼 조인트 개발에 관한 연구 (A Study on the Sliding Ball Joint of Parallel Kinematic Mechanism)

  • 유대원;이재학
    • 대한기계학회논문집A
    • /
    • 제33권9호
    • /
    • pp.982-989
    • /
    • 2009
  • Parallel Kinematic Mechanism (PKM) is a device to perform the various motion in three-dimensional space and it calls for six degree of freedom. For example, Parallel Kinematic Mechanism is applied to machine tools, medical equipments, MEMS, virtual reality devices and flight motion simulators. Recently, many companies have tried to develop new Parallel Kinematic Mechanism in order to improve the cycle time and the precisional tolerance. Parallel Kinematic Mechanism uses general universal joint and spherical joint, but such joints have accumulated tolerance problems. Therefore, it causes position control problem and dramatically life time reduction. This paper focused on the rolling element to improve sliding precision in new sliding ball joint development. Before the final design and production, it was confirmed that new sliding ball joint held a higher load and a good geometrical structure. FEM analysis showed a favorable agreement with tensile and compressive testing results by universal testing machine. In conclusions, a new sliding ball joint has been developed to solve a problem of accumulated tolerance and verified using tensile and compressive testing as well as FEM analysis.

인간형 로봇관절의 개발 (Development of Anthropomorphic Robotic Joint)

  • 류성무;백상훈;최혁렬
    • 대한기계학회논문집A
    • /
    • 제25권1호
    • /
    • pp.89-97
    • /
    • 2001
  • In this paper, we present a new two-dof anthropomorphic joint mechanism that enables to mimic the humanlike motion. The proposed mechanism, called Double Active Universal Joint(DAUJ), generates a two-dof swivel motion without rolling by the coupled motion of two independent motor. In addition, we perform basic experiments to confirm the effectiveness of the proposed mechanism and the results are reported.

Chatter Analysis of a Parallel Mechanism-based Universal Machining Center

  • Lee, Sin-Young;Kim, Jong-Won;Lee, Jang-Moo;Kim, Gyoo-Beom
    • Journal of Mechanical Science and Technology
    • /
    • 제17권5호
    • /
    • pp.691-697
    • /
    • 2003
  • Extensive researches have been carried out on machine tool chatter to obtain assessment procedure and improvement measures. In this study, chatter limit is predicted on a newly fabricated universal machining center by the combination of structural dynamic characteristics and cutting mechanics. We showed the unstable cutting conditions, and from them we could plot the unstable borderlines. From the chatter simulations we could say that the newly built universal machining center can be well used in the finishing machining of steel as other common machine tools.

피로시험용 프로그램 개발에 관한 연구 (A Study on the Program Development of Fatigue Test)

  • 이종선
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
    • /
    • pp.275-280
    • /
    • 1999
  • This study is object to program development of fatigue test for universal testing machine. Fatigue program is consist of test simulation, data analysis and print report by control fatigue testing program which expansively applies tension-compression tests with using oil pressure mechanism by Visual Basic software running under windows 98.

  • PDF