• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.323-324
• /
• 2007

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.28-36
• /
• 2002

The continuously variable transmission (CVT) mechanism considered here is the output coupled type which combines the functions of a 2K-H I type differential gear unit and a V-belt type continuously variable unit (CVU). One shaft of the CVU is connected directly to the output shaft and another shaft of it is linked to the differential gear unit. It is shown that some fundamental relations (speed ratios, power flows and efficiencies) for twelve mechanisms previously described are valid by various experimental studies, six of them produce a power circulation and the others produce a power split. Parametric analysis is carried out in relation to the efficiency, speed ratio and power ratios in order to assist in the design of an optimum configuration. Some useful properties associated with power flow modes also are discussed in the output coupled type continuously variable transmission.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.739-746
• /
• 1994

This paper present an efficient methodology to solve the unit commitment problem for large scaled power system which involves various type of generation. We introduce the global optimization approach to coordinate the thermal type, hydro type and pumped storage type generation. To overcome the shortcomings in dynamic programming for thermal unit commitment, an improved heurisitic method using lambda(λ) was proposed, Hydro and pumped type allocation was Solved by analytical approach using λ which exculde undisirable iteration for satisfying the energy usage constraints. The case studies for proposed algorithm are proven by sample system and KEPCO practical system, which produced very resonable both computing requirements and convergency.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.92-96
• /
• 2006

With the change of family type and diversify of life style, residents need various unit plan in Quality. A rate of economically productive women has increased, and generally double-income households will continuously increase in the future. So a research is requested to consider the double-income households's satisfaction for a unit plan based on their life characteristics. The purpose of this study is to find out double-income households's lifestyles, and to search and analyze users' needs for spatial composition according to their lifestyles, and then, embody spatial composition of Apartment Unit plans. The findings are as follows. (1) Housing lifestyles of users living in apartment are categorized into 5 types: seeking the way to make housework easy and comfortable, making the best use spatial composition, pursing the universalism, housework oriented, pursing the leisure. (2) The type of seeking the way to make housework easy and comfortable requests facility with home appliances and a shower bath, the type of making the best use spatial composition requests storage space and trial about new plan, the type of pursing the universalism is concerned about the protection of environment and a memorial service, the type of housework oriented wants a talk with their family and discuss some problem, and the type of pursing the leisure requests division of household with their family and likes traveling and sports.

• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.19-29
• /
• 2009

The purpose of this study is to evaluate the air diffusion performance of a range of indoor units for room airconditioners; the wall-mounted type, floor-standing type, and ceiling-mounted type. These types of units, which have been widely used in housing spaces, will be studied with respect to thermal comfort and the energy performance using CFD analysis. In this study, current air conditioning status and related problems in housing spaces are examined, and a CFD analysis is performed in order to compare and analyze the thermal comfort and energy efficiency across each type of indoor-unit using the PMV, ADPI, EUC and FCEI indexes. The analysis results collectively considering thermal comfort and energy performance indicated that the ceiling-mounted type 4-way indoor unit showed the best diffusion performance in terms of thermal comfort, and had the second best diffusion performance in terms of energy performance after the wall-mounted type under certain conditions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.200-201
• /
• 2015

The unit modular method is one in which unit modules are prefabricated at a factory and then constructed at a construction site. That is why an important process, transporting unit module, is added in this method. The purpose of this study is to analyse the load for transporting unit module. The results of the analysis of the driving experimental runs revealed that a maximum load of 15 kN was applied on adapter block type A and a maximum load of 25 kN on adapter block type B. These loads were recorded at the points in the road test when the low-bed trailer was driving through unstable sections of the test such as stopping, restarting, passing over a speed bump or taking a left turn at speed.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.51-57
• /
• 1999

This thesis is written about the Wired Logic Type Unit in developing equipment that the load is driven, that the interface unit connect with 1 Scan time to PO30 of operated PLC output contact with that a sensing signal of Temperature Sensor RSD Pt $100\Omega$ let generate the relay output of temperature controller and input the PLC. The PLC Test Kit in country that the PLC to be programmed at the PLC education place is able to drive the load, is done to do a education of PLC on status that interface process between PLC and load are disregarded. As Developing Kit for supplement this point, when the relay output of temperature controller to use Pt 100 of temperature sensor as mentioned on the former among every kinds of sensor feed back to the input of the PLC, as the equipment to act with real time system that the output contact of PLC operated to insert the WLTIJ among PC, PLC and the load, it can understand and see very easy the main principle of PLC use. The structure of WLTU to be a interface unit of load separated as to the point of contact and noncontact, sensor, indicating lamp and A contact and B contact that is belong to driving part, and a motor is belong to loading part.

• Journal of the Korean housing association
• /
• v.17 no.5
• /
• pp.147-157
• /
• 2006

A study on Composing Unit Spaces of Apartment Houses according to the Differentiation in Lifestyle by survey on preferences. The purpose of this study is to propose composition models of unit spaces for 85m2 net area apartment houses by lifestyle types. This study set up a hypothesis that there is a critical divergence of preferences in composition types of unit spaces according to lifestyle. To prove the hypothesis, investigation on variable floor plans of apartments to extract spatial composition types of units and questionnaire survey on lifestyleand preferences for composition types were implemented. To extract several factors regarding, characteristics of lifestyle, factor analysis, was implemented for each variable. Cluster analysis was conducted to cluster interviewees by similarity of lifestyle. To identify and define how each factor reacts, ANOVA and cross tabulation analysis between factors and clusters were used. The type of spatial composition was analyzed by plane characteristic, spatial relation and spatial usability on the basis of apartment plate type. As a result, lifestyle was divided into three types: reasonable lifestyle, trend-seeking lifestyle and conservative lifestyle. As, the result of investigating characteristics for the type of spatial composition according to the type of lifestyle, preferred types and main districts were different. Therefore, the hypothesis was proved.

• Journal of the Korean housing association
• /
• v.19 no.5
• /
• pp.1-10
• /
• 2008

This study attempts to analyze the characteristics of the space composition of the apartments and the general principles of apartments unit plans in Gyeongnam. Literature review and content analysis method were used in his research. The data of 108 unit plans were collected from e-catalogue and model houses of housing construction firms. The results of this study were as follows; 1) The general principle of Gyeongnam apartment unit plans, the tendency of 4LDk+2BATH type, 4bay, central type living room were showed. 2) In the point LDK and couple's bed room, LDK area become large and open type and couple's bed room were showed bed room+dress+powder+bath type as Maser's zone. 3) The entrance has a intermediate space as a balcony or a former space and the privacy of LDK space was protected from the entrance. 4) In the case of support space, generally support kitchen and laundry space were offered and several balconies were utilized. In fact, he differences of apartment plan composition between central cities and Gyeongnam were no showed. Therefore, these tendencies on plan composition of apartment in Gyeongnam were followed the general principles of Korean unit plans.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.277-280
• /
• 1991

We have developed 154kV OF cable accessories from 1987. 4 to 1990. 10 by doing assembly design, investing equipment, manufacturing inspecting parts, type testing in labortary, in our company, in KEPCO. The one of those accessories. Oil Stop Joint, has been developed by using Shield Metal Embeded Type Epoxy Unit. This is More reliable than old type.