• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.167-173
• /
• 1999

This paper presents results of monitoring grinding processes with on-the-machine measurement of surface roughness by using nux ratios of scattered lights. A compact, on-the-machine surface roughness sensor. which consists of a diodelaser and several optic units. is developed. The control unit is also developed. The developed sensor together with the controller is applied for monitoring grinding processes of two different grinding machines. Experimental results show that the nux ratios and their standard deviations measured by the developed sensor over the entire ground surface are useful for monitoring grinding conditions. In particular, the sensor and the control unit are proved to be useful for monitoring grinding processes in order to detect abnormal grinding conditions and dressing time.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.15-33
• /
• 1992

Synthetic membrane processes are being increasingly integrated into existing reaction, isolation, and recovery schemes for the production of valuable biological molecules. In many cases they are replacing traditional unit processes. The properties of membrane systems which are most often exploited for both upstream and downstream processing are their permselectivity, high surface area per unit volume, and their potential for controlling the level of contact and/or mixing between two separate phases. Advances in both membrane materials and module design and operation have led to better control of concentration polarization and membrane fouling. After presenting some recent advances in membrane materials and fluid mechanics, we demonstrate how membranes have been integrated into cellular and enzymatic reaction schemes. This is followed by a review of established and emerging membrane separation processes. Several examples are used to emphasize the synergism between biological processes and synthetic membranes.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.367-377
• /
• 2019

In this study, the fate and removal of 15 pharmaceuticals (including stimulants, non-steroidal anti-inflammatory drugs, antibiotics, etc.) in unit processes of a sewage treatment plant (STP) were investigated. Mass loads of pharmaceuticals were 2,598 g/d in the influent, 2,745 g/d in the primary effluent, 143 g/d in the secondary effluent, and 134 g/d in the effluent. The mass loads were reduced by 95% in the biological treatment process, but total phosphorous treatment did not show a significant effect on the removal of most pharmaceuticals. Also, mass balance analysis was performed to evaluate removal characteristics of pharmaceuticals in the biological treatment process. Acetaminophen, caffeine, acetylsalicylic acid, cefradine, and naproxen were efficiently removed in the biological treatment process mainly due to biodegradation. Removal efficiencies of gemfibrozil, ofloxacin, and ciprofloxacin were not high, but their removal was related to sorption onto sludge. This study provides useful information on understanding removal characteristics of pharmaceuticals in unit processes in the STP.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2828-2839
• /
• 2022

This study developed a safety assessment tool for geological disposal systems called APro, a systemically integrated modeling system based on modularizing and coupling the processes which need to be considered in a geological disposal system. Thermal, hydraulic, chemical, canister failure, radionuclide release and transport processes were considered in the current version of APro. Each of the unit processes in APro consists of a single Default Module, and several Alternative Modules which can increase the flexibility of the model. As an initial stage of developing the modularization concept and modeling interface, the Default Modules of each unit process were described, with one Alternative Module of chemical process. The computation part of APro is mainly a MATLAB workspace controlling COMSOL and PHREEQC, which are coupled by an operator splitting scheme. The APro model domain is a stylized geological disposal system employing the Swedish disposal concept (KBS-3 type), but the repository layout can be freely adjusted. In order to show the applicability of APro to the total system performance assessment of geological disposal system, some sample simulations were conducted. From the results, it was confirmed that coupling of the thermal and hydraulic processes and coupling of the canister failure and the radionuclide release processes were well reflected in APro. In addition, the technical connectivity between COMSOL and PHREEQC was also confirmed.

• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.849-858
• /
• 2015

This study set the pyroprocess facility at an engineering scale as a cost object, and presented the cost consumed during the unit processes of the pyroprocess. For the cost calculation, the activity based costing (ABC) method was used instead of the engineering cost estimation method, which calculates the cost based on the conceptual design of the pyroprocess facility. The calculation results demonstrate that the pyroprocess facility's unit process cost is $194/kgHM for pretreatment, $298/kgHM for electrochemical reduction, $226/kgHM for electrorefining, and $299/kgHM for electrowinning. An analysis demonstrated that the share of each unit process cost among the total pyroprocess cost is as follows: 19% for pretreatment, 29% for electrochemical reduction, 22% for electrorefining, and 30% for electrowinning. The total unit cost of the pyroprocess was calculated at $1,017/kgHM. In the end, electrochemical reduction and the electrowinning process took up most of the cost, and the individual costs for these two processes was found to be similar. This is because significant raw material cost is required for the electrochemical reduction process, which uses platinum as an anode electrode. In addition, significant raw material costs are required, such as for $Li_3PO_4$, which is used a lot during the salt purification process.

• Korean Journal of Adult Nursing
• /
• v.26 no.6
• /
• pp.603-613
• /
• 2014

Purpose: The purpose of this study was to explore and identify the role adaptation processes of family caregivers with patients transferred from intensive care unit to general ward. Methods: Using a grounded theory methodology, in-depth individual interviews were conducted. Data were collected from 11 participants. The participants were asked about their experiences of role adaptation considering situational contexts and interactional strategies. Transcribed data and field notes were analyzed using constant comparative analysis. Results: The core category was 'becoming almost a nurse with hope and fear'. The identified phenomena by the participants were the joy of being alive, having hope for a full recovery, anxiety and fear of uncertain future, feeling burdensome on a given role. The results included both role adaptation and mal-adaptation of caregivers. Conclusion: The role adaptation processes of family caregiver with patients transferred from intensive care unit to general ward can be explained as becoming almost a nurse with hope and fear. The findings of the study provided fundamental information for developing programs to support the given family caregivers for successful role adaptation.

• Journal of the Korea Society for Simulation
• /
• v.6 no.1
• /
• pp.25-40
• /
• 1997

This study deals with an autonomous generation of simulation codes for the design of processes of c CIM system based on the concept of model transformation. We assume we have a functional model of an organization which is developed using the well-known IDEF0 methodology. Then, a modeling methodology, called PROWD(PRocess flOW Description), is suggested to develop the flow processes of the organization. To Derive simulation specifications for the transformed PROWD model, we define a module of a "unit system" for each activity of PROWD model. Then specifications for system entities and resources are derived from input/control/mechanism/output and entity flows of PROWD model. Entitiy queues are defined from the sates and events of unit systems. Finally, SIMAN model frame is generated from those specifications through a suggested algorithm. The implementability and validity of the proposed approach is tested by developing a prototype of a computer-assisted design system on the operation processes of FMS installed at SNU-ASRI (Seoul National University-Automation and Systems Research Institute).nstitute).

• Membrane Journal
• /
• v.2 no.2
• /
• pp.91-103
• /
• 1992

Synthetic membrane processes are being increasingly integrated into existing reaction, isolation, and recovery schemes for the production of valuable biological molecules. In many cases they are replacing traditional unit processes. The properties of membrane systems which are most often exploited for both upstream and downstream processing and their permselectivity, high surface area per unit volume, are their potential for controlling the level of contact and/or mixing between two separate phases. Advances in both membrane materials and module design and operation have led to better control of concentration polarization and membrane fouling. After presenting some recent advances in membrane materials and fluid mechanics, we demonstrate how membranes have been integrated into cellular and enzymatic reaction schemes. This is followed by a review of established and emerging synergism between biological processes and synthetic membranes.

• Journal of the korean society of oceanography
• /
• v.32 no.3
• /
• pp.138-144
• /
• 1997

The tidal deposits in the Haenam Bay, southwest coast of Korea, are stratigraphically divided at least into two units (Unit I of Holocene and Unit II of late Pleistocene) based on the obtained vibracoring sediments. In Unit I, clay minerals of illite, chlorite, kaolinite and smectite are observed as similar to those of the other modern tidal deposits. Of note, however, is the absence of smectite and chlorite in the upper part of Unit II compared with the clay mineral compositions of Unit I. It is concluded that the subaerial weathering and diagenetic effects rather than depositional processes are responsible for the positive and characteristic differences in clay mineral compositions between two units, that is, the upper part of Unit II was exposed subaerially and weathered diagenetically prior to the late Holocene transgression. Therefore, the bounding relationship between Unit I and Unit II is unconformable.

• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.381-391
• /
• 2022

Two-photon-polymerization additive-manufacturing systems feature high resolution and precision. However, there are few reports on specific methods and possible problems concerning the use of small lasers to independently build such platforms. In this paper, a femtosecond-laser two-photon-polymerization additive-manufacturing system containing an optical unit, control unit, monitoring unit, and testing unit is built using a miniature femtosecond laser, with a detailed building process and corresponding control software that is developed independently. This system has integrated functions of light-spot detection, interface searching, micro-/nanomanufacturing, and performance testing. In addition, possible problems in the processes of platform establishment, resin preparation, and actual polymerization for two-photon-polymerization additive manufacturing are explained specifically, and the causes of these problems analyzed. Moreover, the impacts of different power levels and scanning speeds on the degree of polymerization are compared, and the influence of the magnification of the object lens on the linewidth is analyzed in detail. A qualitative analysis model is established, and the concepts of the threshold broadening and focus narrowing effects are proposed, with their influences and cooperative relation discussed. Besides, a linear structure with micrometer accuracy is manufactured at the millimeter scale.