• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.63-78
• /
• 1983

As a basic study on the machine tools of modular structure, a Computer Aided Design of feed driving unit and an optimization of the dynamic characteristics of a machine tool structure are carried out.. Computer-aided design technique enables designers to save time and to easily do the job in variant design by effectively documenting design techniques and data. In this study a computer program package was developed for automatic design of a proper feed driving units by utilizing building block principle of OIWA CADET.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1880-1888
• /
• 2012

This study tried to analyze traffic assignment volume by application of land use patterns and transport policies in District Unit Design. It is postulated a Toy network and various scenarios which are combined land use patterns and transport policies for analyzing change of assignment volume. As results, this study shows best District Unit Design technique is the policy that develop mid block and introduction of car free zone to inner 2 way streets. Worst design technique is the policy that introduction of joint car parking to mid block. And also worst design technique to residents who are living in inner block is the policy that just develop only one center zone.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.6
• /
• pp.45-53
• /
• 2018

The construction work to establish a safety management plan should be carried out Design for Safety(DFS) task by the designers from May 2016 according to the amendment of the Construction Technology Promotion Act. However, designers lack experience in construction work and lack of information on safety accidents, so it is not easy to predict a disaster that may occur during the construction phase. Therefore, the purpose of this study is to provide information about disasters that can occur in each construction work in order to enable designers to efficiently perform DFS task in the design phase. In this study, the construction work was classified by work unit and the disaster risk assessment was conducted using the Failure Mode and Effect Analysis technique. The disaster information by work unit analyzed in this study can be used to provide designers with an alternative to prevent disasters at the design stage. Disaster information by work unit of apartment construction can be used by designers to prepare an alternative for disaster prevention at the design stage.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.655-660
• /
• 2004

The pipes in the outdoor unit of an air conditioner are designed to reduce the vibration effect of the compressor. Three-dimensional structure of the pipe could provide various design choices and the resultant vibration characteristics of the outdoor units. A design program has been developed for an eligible parametric study of pipe design and automatic vibration analysis using commercial software, I-DEAS, and its macro. Optimal design of pipe configuration has been performed using the commercial software, iSIGHT. The optimized design shows 70 percents improvement in the vibration characteristics of the outdoor unit of an air conditioner.

• Korean Institute of Interior Design Journal
• /
• no.36
• /
• pp.44-51
• /
• 2003

The purpose of this study is to present the design guidelines of residential unit for the elderly by investigating their needs and preferences. The results of this study will be utilized to develop the alternative elderly housing which is appropriate for the Korean culture. To perform an empirical analysis, the existing data collected in 2000 for the study of silver industry In Ulsan were used. The subjects were 292 elderly aged 65 and over living in Ulsan. Statistics employed for the analysis were frequencies, percentage, and Chi-squared test with cross-tabulations. About 70% of the elderly respondents preferred more than 49.5$m^2$(15-pyung) for the size of residential unit and about 50% of them wanted to have bedroom, bathroom, kitchen, and living room In the unit. Most elderly (72%) did not prefer to select interior finishes for their units by themselves. Surprisingly, the elderly did not want to bring their own furniture when relocating to the elderly housing, which was somewhat different result from previous studies. There were significant differences between preferred unit size and level of education, income, and living with or without spouse. Also, income and health status were the characteristics of elderly which made differences in preferred space composition.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.312-319
• /
• 2015

The grinding and furbishing process as the finishing process for molds include the works such as the grinding, buffing, lapping and polishing among others. A finishing tool unit is applied to this finishing process for the burr, lapping, polishing and others of molds. A finishing tool unit can carry out the flexible machining, depending on the machining allowance for objects to be cut on the basis of the instrumental driving mechanism which enables the up, down, left and right floating, which is applied in link with the dedicated cutters and robot machining systems. This study selected the shape to increase the rotatory force of an impeller when air is discharged during the driving of a finishing tool unit, and reflected it to the impeller designing. In addition, the study analyzed each flow velocity and pressure distribution per air pressurization value and finally analyzed the rotating torque to suggest the optimal conditions in designing impellers.

• Journal of the Korean housing association
• /
• v.20 no.2
• /
• pp.101-108
• /
• 2009

The purpose of this study is to develop basic data for the design of the housing space for unit that factors in the sentiment of the residents by using aesthetic elements and expression method to search for the ways to design housing space for differentiated unit. The results are as follows: First, aesthetic elements in the aesthetic element in the unit housing space for unit can be classified into basic elements and detailed elements. Second, it is possible to classify into distortion, mixing, superposition and juxtaposition methods. Third, use of the 'material' for 'wall' is recommended when designing differentiated housing space by using basic elements. At this time, expression using the method of 'mixing' is effective for inducing differentiation. In particular, elements that can perceive the difference in time are mixed, to add on slight differentiation. Fourth, 'illumination' and 'material' are used when designing differentiated housing space by using detailed elements. Fifth, preference degree of the expression method is manifested differently depending on the selected elements. Lastly, this study conducted a study on the preference level of the aesthetic elements and expression method targeting the experts alone to differentiate the design of the residential space for unit.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.3
• /
• pp.76-90
• /
• 2004

The purpose of this study is to extract landscape design elements regulation of the District Unit Plan(DUP) in new town areas, and to find out characteristics in terms of urban design elements in comparison with the psychological and physical aspects. For this purpose, we reviewed urban design elements and design elements in terms of the landscape by DUP and analyzed the activation of landscape on the selected case-area by interviewing experts such as planners, public officials, and professors in the department of urban planning and landscape, as well as the university students. The analysis framework for the case-study consists of 4 components: the section of region, street, building, open space, etc. The new development areas in Daejeon Metropolitan City was chosen as the case study area, because they have been developed by DUP regulations. As a result of this study, we can extract characteristics of landscape. The results indicate that `skyline design',`view corridor design',`landscape design',`street furniture design' and `building design(form, height, color, and elevation)' are the key planning and design factors influencing differences in the landscape preference. This research identifies that there are no detailed planning and design guidelines adopted within the four case study areas in Daejeon for regulating the characteristics of skyline, planting and street furniture while detailed guidelines established for density, building height and site layout. Considering their significant correlation with the level of landscape preference, this study suggests that detailed planning and design guidelines for the characteristics of skyline, rooftop and streetscape should be established in future DUP.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.324-330
• /
• 2012

In this paper, we presents a robust control system design for compensating hysteresis of a piezoelectric actuator-based actuation unit. First, the dynamics between the input voltage and the output displacement of the actuation unit are unravelled via a non-parametric system identification method. From the dynamic characteristics of those experimental transfer functions, a parametric model is then derived, whose dynamics match those of the non-parametric ones under various conditions on input voltages. A robust controller is constructed on the basis of this parametric model in order not only to effectively compensate the hysteresis of the actuation unit but also to guarantee the robust stability. Extensive experiments show that the proposed robust control system successfully mitigate the effect of the hysteresis and improve the tracking capability of the actuation unit.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.844-847
• /
• 2003

This thesis suggests design considerations and solutions for cam type transfer unit in which feed, lift, and clamp motions are occurred by cams. For fast transferring and avoiding cam breakage, each designed cam must satisfy the given specifications such like velocity, acceleration, jerk, pressure angle, ram thickness, and torque. To reduce absolute torque magnitude, conjugate cam is suggested. Conjugate cam eliminates the redundant pre-load by using complementary cam and follower to avoid jumping between them. The result from the prototype shows the reductions of the absolute torque value, and it indicates that conjugate cam could enhance the working speed of cam type transfer unit and extend of the life span of cam type transfer unit.