• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 2008

Fuel cells have the potential of providing several times higher energy storage densities than those possible using current state-of-the-art lithium-ion batteries, but current energy density of fuel cell system is not better than that of lithium-ion batteries. To achieve the high energy density, volume and weight of fuel cell system need to be reduced by miniaturizing system components such as stack, fuel tank, and balance-of-plant. In this paper, the thin flexible PCB (Printed circuit board) is used as a current collector to reduce the stack volume. Two end plates are made from light weight aluminum alloy plate. The plate surface is wholly oxidized through the anodizing treatment for electrical insulation. The opening rate of cathode plate hole is optimized through unit cell performance measurement of various opening rates. The performances are measured at room temperature and ambient pressure condition without any repulsive air supply. The active area of MEA is 10.08 $cm^2$ and active area per a unit cell is 1.68 $cm^2$. The peak power density is about 210 mW/$cm^2$ and the air-breathing planar stack of 2 Wis achieved as a small volume of 18 cc.

• Composites Research
• /
• 제17권2호
• /
• pp.34-39
• /
• 2004

본 연구에서는 폐쇄형 발포금속의 인장 특성을 이해하기 위하여 수정된 단위모델을 제시하였다. 또한 발포금속의 밀도는 가우스 분포에 의거하여 확률적으로 분포한다고 가정하고 본 연구에서 제시된 수정 단위 모델을 조합하여 유한요소 모델을 제안하였다. 이 모델은 실제 인장 시험과 유사한 변형거동을 보이는 것을 확인하였고, 적절한 밀도 분포와 내부 기공을 고려하게 되면, 해석에서 구해진 최대 인장 강도가 근사적으로 실험결과와 일치하는 것을 볼 수 있었다. 또한, 발포 알루미늄의 최대 인장 강도는 밀도 분포의 표준편차보다는 내부 기공 부피분율에 더 민감하게 변하는 것으로 밝혀졌다.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.791-794
• /
• 2010

축전식 전기탈이온(Capacitive deionization: CDI) 시스템을 실제공정에 적용하기 위하여 대용량 제작이 가능하며 높은 처리 효율을 갖는 셀 구조 연구가 필요하다. 본 연구에서는 대용량 제작을 위하여 낮은 수압으로 운전할 수 있는 병렬형 구조와 처리효율을 증가시키기 위하여 집중형 유로를 동시에 적용하여 설계하고 성능 평가하였다. 설계한 유로 구조의 유입수 흐름을 확인하기 위하여 유체역학적 모델링이 가능한 COMSOL프로그램을 사용하여 집중형 유로가 형성되는 것을 확인하였고, 염 제거 효율을 확인하기 위하여 단위 셀과 20층으로 용량 증축된 스택을 사용하여 CDI운전을 통한 제거효율을 확인하였다. 그 결과 $210cm^2$ 면적의 단위 셀에서는 18 ml/min의 유량조건에서 1.1 psi의 수압으로 70.8%의 제거효율을 보였으며, 20층으로 용량 증축된 셀에서는 유량을 20배로 늘린 360 ml/min의 유량조건에서 1.3~1.5 psi의 수압으로 75.6%의 제거효율을 확인할 수 있었다. 연구된 유로 설계는 대용량 시스템을 제작하는데 있어서 적합한 병렬형 구조이며 효율적인 탈염을 할 수 있는 집중형 유로로 설계되어 실제공정에 적용할 수 있는 구조임을 확인할 수 있었다.

• Applied Biological Chemistry
• /
• 제41권8호
• /
• pp.608-610
• /
• 1998

To investigate the inhibitory activity of 2-hydroxy-3-amino-4-phenylbutyrate-harboring aminopeptidase N inhibitors, p-nitro-AHPA-peptide derivatives (1 and 2) and an AHPA-peptide derivative (3) were synthesized by chain elongation from C-terminal end using DCC/HOBt as a coupling reagent. The peptides $1{\sim}3$ exerted strong inhibitory activities against aminopeptidase N with $IC_{50}$ values of 1.8, 7.3 and $24.0\;{\mu}g/ml$, respectively, and cytotoxicity on cancer cell lines in vitro.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.4-6
• /
• 2003

We have developed the active matrix OLED displays with a high efficiency red emission material which uses an emitting assist (EA) dopant system. The EA dopant (rubrene) did not itself emit but assisted the energy transfer from the host ($Alq_s$) to the red emitting dopant(DCM2). A stable red emission (chromaticity coordinates: x=0.64, y=0.36) was obtained in this cell within the luminance range of 100 - 4000 $cd/m^2$ By using EA dopant system, we can realize the reduction of the power consumption of the OLED display..

• Clinical and Experimental Vaccine Research
• /
• 제12권2호
• /
• pp.176-178
• /
• 2023

We report the case of a toddler, with a history of mild atopic dermatitis (AD) since early infancy, presented to the Giannina Gaslini, a pediatric polyclinic hospital, 14 days after measles-mumps-rubella (MMR) vaccination, for the occurrence of a disseminated vesico-pustular rash, accompanied by general malaise, fever, restlessness, and anorexia. Eczema herpeticum (EH) was diagnosed clinically and confirmed by laboratory examinations. The exact pathogenesis of EH in AD is still debated and possibly involves an inter-play between altered cell-mediated and humoral immunity, failure to up-regulate antiviral proteins, and exposure of viral binding sites through the dermatitis and an epidermal barrier failure. We hypothesize that in this particular case, MMR vaccination might have played an additional important role in the alteration of innate immune response, facilitating the manifestation of herpes simplex virus type 1 in the form of EH.

• KSBB Journal
• /
• 제11권5호
• /
• pp.565-571
• /
• 1996

Aspergillus oryzae A Tee 2114를 사용하여 $\beta$-mannanase의 생산에 영향을 주는 배지성분의 최적 화를 수행하였다. 탄소원인 locust bean gum의 농 도를 달리하여 발효를 수행하였다. Locust bean gum의 농도가 20 g/L 이상일 때는 초기의 점도가 높아 혼합이 거의 되지 않아 초기에 $\beta$-mannanase 의 생산이 지 연되는 현상이 나타났고. Locust bean g gum의 농도가 증가할수록 $\beta$-mannanase의 역가와 균체농도가 비례척으로 증가하였다. Locust bean gum 10 g/L 배지에서 여러 가지 질소원이 $\beta$-mann anase의 생산에 미치는 영향을 살펴 본 결과,B-man n nanase의 역가는 무기질소원 중에서는 $(NH-4)_2SO_4$가 좋았으며 유기질소원 중에서는 malt extract가 가장 좋았다. 여러 가지 무기엽의 최적화를 수행한 결과 KH,PO.가 $\beta$-mannanase의 생산에 중요한 인자임을 알 수 있었다. 배지최적화 결과 최적배지 로 locust bean gum 10 giLt malt extract 3 g/L, $(NH-4)_2SO_4 2 g/L, KH_2PO_4$ 10 g/L이 결정되었으며 이때 $\beta$mannanase의 역가는 거의 6 unit/mL에 접 근하였다. 최적배지를 사용하여 발효조에서 배양을 수행하였다. 발효조의 흔합효과로 배양초기에 나타 나는 $\beta$-mannanase 생산 지 연현상을 감소시 킬 수 있었고 배양시간도 단축할 수 있었다. 27시간 배양 한 후 $\beta$mannanase의 역가 9.7 unit/mL와 비 $\beta$-mannanase의 역가 1.9 unit/mg-cell-을- 얻었다. 이 때, 생산성은 0.36 unit/mL. h이었다.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.1023-1029
• /
• 2001

The positions of Kr atoms encapsulated in the molecular-dimensioned cavities of fully dehydrated zeolite A of unit-cell composition Cs3Na8HSi12Al12O48 (Cs3-A) have been determined. Cs3-A was exposed to 1025 atm of krypton gas at 400 $^{\circ}C$ for four days, followed by cooling at pressure to encapsulate Kr atoms. The resulting crystal structure of Cs3-A(6Kr) (a = $12.247(2)\AA$, R1 = 0.078, and R2 = 0.085) has been determined by single-crystal X-ray diffraction techniques in the cubic space group Pm3m at $21(1)^{\circ}C$ and 1 atm. In the crystal structure of Cs3-A(6Kr), six Kr atoms per unit cell are distributed over three crystallographically distinct positions: each unit cell contains one Kr atom at Kr(1) on a threefold axis in the sodalite unit, three at Kr(2) opposite four-rings in the large cavity, and two at Kr(3) on threefold axes in the large cavity. Relatively strong interactions of Kr atoms at Kr(1) and Kr(3) with Na+ ions of six-rings are observed: Na-Kr(1) = 3.6(1) $\AA$ and Na-Kr(3) = $3.08(5)\AA.$ In each sodalite unit, one Kr atom at Kr(1) was displaced $0.74\AA$ from the center of the sodalite unit toward a Na+ ion, where it can be polarized by the electrostatic field of the zeolite, avoiding the center of the sodalite unit which by symmetry has no electrostatic field. In each large cavity, five Kr atoms were found, forming a trigonal-bipyramid arrangement with three Kr(2) atoms at equatorial positions and two Kr(3) atoms at axial positions. With various reasonable distances and angles, the existence of Kr5 cluster was proposed (Kr(2)-Kr(3) = $4.78(6)\AA$ and Kr(2)-Kr(2) = $5.94(7)\AA$, Kr(2)-Kr(3)-Kr(2) = 76.9(3), Kr(3)-Kr(2)-Kr(3) = 88(1), and Kr(2)-Kr(2)-Kr(2) = $60^{\circ}).$ These arrangements of the encapsulated Kr atoms in the large cavity are stabilized by alternating dipoles induced on Kr(2) by four-ring oxygens and Kr(3) by six-ring Na+ ions, respectively.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.520-524
• /
• 2011

The properties of manufactured SOFC unit cell using decalcomania method were investigated. The decalcomania method that used in ceramics, dish, vessel and etc. was the very simple process. The SOFC unit cell manufacturer using decalcomania method is very simple process. Especially, the decalcomania method was the most suitable manufacturing method for the segmented type SOFC. The cathode, prevent diffusion layer (PDL), anode functional layer (AFL) and electrolyte were manufactured using decalcomania method on porous anode support. The sintered electrolyte at 1450$^{\circ}C$ for 2 h using decalcomania method was very dense, and the thickness was about 10 ${\mu}m$. The cathode, the PDL and the AFL were manufactured using decalcomania method and was sintered at 1250$^{\circ}C$ for 2 h, and the sintered electrodes were the porous. As a result, with humidified hydrogen used as fuel, the cell with an 15 ${\mu}m$-thick AFL exhibited maximum power densities of 0.246, 0.364, 0.504W/$cm^2$ at 700, 750, 800$^{\circ}C$, respectively.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권3호
• /
• pp.206-215
• /
• 2005

In this paper, we propose a new design method of Genetic Algorithm Processor(GAP) and Evolvable Hardware(EHW). All sorts of creature evolve its structure or shape in order to adapt itself to environments. Evolutionary Computation based on the process of natural selection not only searches the quasi-optimal solution through the evolution process, but also changes the structure to get best results. On the other hand, Genetic Algorithm(GA) is good fur finding solutions of complex optimization problems. However, it has a major drawback, which is its slow execution speed when is implemented in software of a conventional computer. Parallel processing has been one approach to overcome the speed problem of GA. In a point of view of GA, long bit string length caused the system of GA to spend much time that clear up the problem. Evolvable Hardware refers to the automation of electronic circuit design through artificial evolution, and is currently increased with the interested topic in a research domain and an engineering methodology. The studies of EHW generally use the XC6200 of Xilinx. The structure of XC6200 can configure with gate unit. Each unit has connected up, down, right and left cell. But the products can't use because had sterilized. So this paper uses Vertex-E (XCV2000E). The cell of FPGA is made up of Configuration Logic Block (CLB) and can't reconfigure with gate unit. This paper uses Vertex-E is composed of the component as cell of XC6200 cell in VertexE