• KSBB Journal
• /
• v.8 no.5
• /
• pp.457-464
• /
• 1993

In this study, an attempt was made to investigate optimum cell growth and products by Bacillus amyloliquefaciens 23350 in batch culture by varing carbon soures. Maximum dry cell density increased with the increase of initial glucose concentration. Maximum dry cell density was obtained with the highest value of 5.2g/l at 30g/l of initial glucose concentration. By adding acetic acid at 20g/l of initial glucose concentration, the cell growth rate decreased with the increase of initial acetic acid concentration. Among the various carbon sources, maximum $\alpha$-amylase production was obtained with 225unit/ml at 10g/1 of initial glucose concentration. Optimum production of $\alpha$-amylase was obtained with 376unit/ml at 2g/l of initial acetic acid concentration and 20g/l of initial glucose concentration. By 10g/1 of initial glucose concentration, both good maximum specific cell growth rate and maximum $\alpha$-amylase production rate were obtained. In view of the results studied optimum production and specific production rate of $\alpha$-amylase, acetic acid was initially added 2~4g/l with 20g/1 of initial glucose concentration in batch culture.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.37-44
• /
• 2006

The homoepitaxy of Si(5 5 12) at $495^{\circ}C$ has been studied by Scanning Tunneling Microscopy under ultrahigh vacuum. A Si-dimer is the basic building-block and preferentially adsorbs on a unique site, that is, the Si-dimer/adatom site at the (337) and the (225) subsections within the Si(5 5 12) unit cell. The Si(5 5 12) unit cell is faceted to $3\times(337)$ subsections filled with Si-addimers and $1\times(113)$ subsection. In this step the tetramer at the other (337) section within the unit cell is transformed to a dimer/adatom site which can accept Si-dimers. Each (337) section is faceted to $1\times(112)\;and\;1\times(113)$, and then finally the unit cell of Si(5 5 12) is faceted to $3\tiems(112)\;and\;4\times(113)$ and forms the facet of effective height, $2.34{\AA}$. In this step, mutual transformation between the honeycomb chain and the dimer/adatom occurs. Finally, the valley between (112) and (113) facets is filled. If once the last step is completed, the uniform and planar Si(5 5 12) terrace is recovered. From the present study, therefore, it can be concluded that the homoepitaxy on Si(5 5 12) is periodically achieved and such growth mode is quite unique since faceting of the substrate-unit-cell plays a critical role for controlling uniformity of the overlayer.

• Animal cells and systems
• /
• v.6 no.2
• /
• pp.171-180
• /
• 2002

Nitric oxide has high affinity for iron, and thus it can cause intracellular iron loss. We tested the idea that intracellular iron can be the primary target of NO toxicity by comparing the signaling mechanisms involved in cell death caused by iron depletion and that caused by NO. Treatment of HL-60 cells with a NO donor, S-nitroso-N-acetyl-DL-penicillamine (SNAP), decreased the intracellular iron level rapidly as that observed with the iron chelator deferoxamine (DFO). Iron chelators such as DFO and mimosine could induce death of human leukemic HL-60 cells by a mechanism requiring activation of p38 kinase, c-Jun N-terminal kinase, caspase-3 and caspase-8. DFO and SNAP also caused release of cytochrome c from mitochondria. Inhibition of p38 kinase by a selective inhibitor, SB203580, abolished the NO and DFO-induced cell death, release of cytochrome c, and activation of caspase-3 and caspase-8, thus indicating that p38 kinase lies upstream in the cell death processes. In a parallel situation, the cells that are sensitive to NO showed similar sensitivity to DFO. Moreover, simultaneous addition of ferric citrate, an iron-containing compound, inhibited the SNAP and DFO-induced activation of caspases and also blocked the NO-mediated cell cycle arrest at $G_1$ phase. Collectively, our data implicate that the NO-induced cell death of tumor cells including HL-60 cells is mediated by depletion of iron and further suggest that activation of p38 kinase lies upstream of cytochrome c release and caspase activation involved in this apoptotic process.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.349-352
• /
• 2000

In this paper, a SIMD 64bit MAC (Multiply -Accumulate) unit is designed. It is composed of two 32bit MAC unit which supports SIMD 16bit operations. As a result, It can process two 32bit MAC operations or four 16bit operations in one cycle. Proposed MAC unit is described in Verilog HDL. After functional verification is performed, MAC unit is synthesized and optimized with 0.35$\mu\textrm{m}$ standard cell library. The synthesis result shows that this MAC unit can operate at 80㎒ of clock frequency in 85$^{\circ}C$, 3.0V, worst case process and 125㎒ of clock frequency at 25$^{\circ}C$, 3.3V, typical case process. It achieves 320Mops of performance, and is suitable for embedded DSP processors.

• CDE review
• /
• v.21 no.2
• /
• pp.50-60
• /
• 2015

Corresponding to the high consumption rate of the selfie stick for cell phone camera, the design of the product is becoming diverse. However, relatively low cost selfie stick models are not strong enough to stand the weight of the cell phone. This results into a bending of the stick or the accidental fall of the cell phone by the failure of the holding unit. As a solution to the problem, design of selfie stick that is structurally strong enough to stand the weight of the cell phone with the minimum weight for the portability is proposed in this paper.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.161-166
• /
• 2014

In this study, effects of pyrite ($FeS_2$) particle sizes on the electrochemical characteristics of thermal batteries are investigated using unit cells made of pulverized pyrite by ball-milling. At $450^{\circ}C$ unit cell discharge test, the electrochemical capacity of $1.46{\mu}m$ pyrite-cell largely increases compared to $98.4{\mu}m$ pyrite-cell, and their internal resistances also decrease. These results are attributed to the increase in the active reaction area of pyrite by ball milling. However, at $500^{\circ}C$ unit cell discharge test, a $1.46{\mu}m$ pyrite cell shows lower internal resistance than that of $98.4{\mu}m$ pyrite cell only at Z-phase region ($FeS_2{\rightarrow}Li_3Fe_2S_4$). After that, a $1.46{\mu}m$ pyrite cell shows a decrease in the cell voltage and an rapid increase of the internal resistance in J-phase region ($Li_3Fe_2S_4{\rightarrow}LiFe_2S_4$) is observed compared to those of $98.4{\mu}m$ pyrite cell. It can be concluded that at the higher temperature, the thermally unstable pulverized pyrite is decomposed thermally as well as self discharged, simultaneously, which causes the higher resistance and lower capacity at $500^{\circ}C$ in J-phase than that of $98.4{\mu}m$ pyrite cell.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.95.1-95.1
• /
• 2005

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.320-323
• /
• 2015

본 연구에서는 18 atoms unit cell graphene film을 기반으로 한 graphene/h-BN heterostructure의 bandgap 변화에 대해 EDISON LCAODFTLab simulator의 DFT기반 전자구조계산을 통해 알아보았다. Graphene 상에 BN-doping 형태로 주어진 여러 heterostructure의 전자구조계산을 통해 태양전지의 이론적 최적효율을 나타내는 1.2eV 정도의 값을 갖는 구조를 찾을 수 있었다.

• Parasites, Hosts and Diseases
• /
• v.55 no.6
• /
• pp.587-599
• /
• 2017

The immune response against Trichinella spiralis at the intestinal level depends on the $CD4^+$ T cells, which can both suppress or promote the inflammatory response through the synthesis of diverse cytokines. During the intestinal phase, the immune response is mixed (Th1/Th2) with the initial predominance of the Th1 response and the subsequent domination of Th2 response, which favor the development of intestinal pathology. In this context, the glucocorticoids (GC) are the pharmacotherapy for the intestinal inflammatory response in trichinellosis. However, its therapeutic use is limited, since studies have shown that treatment with GC suppresses the host immune system, favoring T. spiralis infection. In the search for novel pharmacological strategies that inhibit the Th1 immune response (proinflammatory) and assist the host against T. spiralis infection, recent studies showed that resiniferatoxin (RTX) had anti-inflammatory activity, which decreased the serum levels of IL-12, $INF-{\gamma}$, $IL-1{\beta}$, $TNF-{\alpha}$, NO, and $PGE_2$, as well the number of eosinophils in the blood, associated with decreased intestinal pathology and muscle parasite burden. These researches demonstrate that RTX is capable to inhibit the production of Th1 cytokines, contributing to the defense against T. spiralis infection, which places it as a new potential drug modulator of the immune response.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.626-630
• /
• 2012

The properties of SOFC unit cells manufactured using the decalcomania method were investigated. SOFC unit cell manufacturing using the decalcomania method is a very simple process. In order to minimize the ohmic loss of flattened tube type anode supports of solid oxide fuel cells(SOFC), the cells were fabricated by producing an anode function layer, YSZ electrolyte, LSM electrode, etc., on the supports and laminating them. The influence of these materials on the power output characteristics was studied when laminating the components and laminating the anode function layer between the anode and the electrolyte to improve the output characteristics. Regarding the performance of the SOFC unit cell, the output was 246 $mW/cm^2$ at a temperature of $800^{\circ}C$ in the case of not laminating the anode function layer; however, this value was improved by a factor of two to 574 $mW/cm^2$ due to the decrease of the ohmic resistance and polarization resistance of the cell in the case of laminating the anode function layer. The outputs appeared to be as high as 574 and 246 $mW/cm^2$ at a temperature of $800^{\circ}C$ in the case of using decalcomania paper when laminating the electrolyte layer using the in dip-coating method; however, the reason for this is that interfacial adhesion was improved due to the dense structure, which leads to a thin thickness of the electrolyte layer.