• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1996.04a
• /
• pp.77-92
• /
• 1996

When an automatic course-keeping is concerned as is quite popular in modern navigation the closed-loop steering system consists of autopilot device power unit (or telemotor unit) steering gear magnetic or gyro compass and ship dynamics. The consideration of irregular disturbances to ship dyanmics and a few non-linear mechanisms involved in the system inevitably or artificially are known to be very important in properly evaluating or analyzing the automatic steering system. In the present study the mathematical model of each element of an automatic steering system is derived which takes account of a fex non-linear mechanisms. PD(Proportional-Derivative) controller and low-pass filter with a weather adjustment are adopted to modelling the characteristics of an autopilot. The calculation method of imposing irregular disturbances to ship dynamics is proposed where irregular disturbances implying irregular wave and the fluctuating component of wind. For he evaluation of automatic steering system of ships in the open seas an important term "performance index" is introduced from the viewpoint of energy saving which derived from the concept of energy loss on ship propulsion. Finally the present methods are applied to two typical types of ship ; an ore carrier and a fishing boat. The various effects of linear and/or non-linear control constants of autopilot on propulsive energy loss are investigated to validate and clarify the present smulation technique.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.87-93
• /
• 2002

A complex network and a parallel computer are made up of interconnected switching units. The role of a switching unit is to set up a connection between an input port and an output port, according to the routing information. We proposed our switching network with a remodeled architecture is a newly modified Banyan network with eight input and output ports. We have analysed the maximum throughput of the revised switch. Our analyses have shown that under the uniform random traffic load, the FIFO discipline is limited to 70%, The switching system consists of an input control unit, a switch unit and an output control unit. Therefore the result of the analyses shows that the results of the networking simulation with the new switch are feasible and if we adopt the new architecture of the revised model of the Banyan switch, the hardware complexity can be reduced. The FIFO discipline has increased by about 11% when we compare the switching system with the input buffer system. We have designed and verified the switching system in VHDL using Max＋plusII. We also designed our test environment including micro computers, the base station, and the proposed architecture. We proposed a new architecture of the Banyan switch for BISDN networks and parallel computers.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.469-474
• /
• 2019

One of the world's major resources is crude oil, the most fundamental part of the industry. There is no place that does not use crude oil. Petroleum refining products and chemical production industrial products are produced through nearby petrochemical complexes and ports after importing crude oil. There would be a possible relationship among the petrochemical complexes and nearby regional ports working with liquid cargoes. To confirm these relations, Ulsan Port, Daesan Port, and Yeosu Gwangyang Port were selected for this study. A Vector Auto Regressive model using time series data was applied. A Unit Root Test was performed. The relationship was confirmed through the Granger and Toda Yamamoto Causality Test.

• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.155-166
• /
• 2015

This study selected container terminals of Gwangyang and Busan Ports to evaluate the influence of efficient container terminals. For the study, after data envelopment analysis (DEA) using the CCR and BCC models, the decision-making unit (DMU) system was used to define nodes; and with the use of a reference group in DEA (BCC model) and a lambda value, this study created a social network and analyzed the influences of efficient DMUs through a centrality analysis of eigenvectors. The results are presented as follows: First, as a result of the DEA, CCR efficiencies in PNC, HJNC, and HPNT container terminals of Busan Port were 1 and BCC efficiencies at Singamman Terminal, Wooam Terminal, PNC, HJNC, HPNT, and BNCT container terminals of Busan Port were 1. Second, as a result of undertaking social network analysis (SNA), according to an eigenvector centrality analysis, HJNC Terminal was referred to the most (influence score of 0.515), which indicates that it is the most influential as a container terminal. The influence of PNC Terminal was 0.512, while that of Wooam Terminal was 0.379. CJ Korea Express in Gwangyang Port was ranked fourth in influence, but its influence score of 0.256 indicates that it was the most influential of the container terminals at Gwangyang Port.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.230-232
• /
• 2019

There is an accelerating need for ocean sensing where autonomous vehicles can play a key role in assisting engineers, researcher and scientists with environmental monitoring and collecting oceanographic data. This paper is performed to develops an autonomous sailing drone to be used as a sensor carrying platform for autonomous data acquisition at Sea. From a sailing drone design viewpoint, it is important to establish reliable prediction methods for sailing drone's resistance. The required power for the propulsion unit depends on the ship resistance and speed. There are three solutions for the prediction of ship resistance as follow analytical methods, model tests in tanks and Computational Fluid Dynamics (CFD). The present paper aims at simulating sailing drone friction resistance using numerical method. The dynamic mesh motion is used to describe the sailing drone movement.

• Journal of Navigation and Port Research
• /
• v.35 no.2
• /
• pp.113-119
• /
• 2011

This paper is a part of the development on the safe navigation model of tugs and barges in Korea waters. desk-top tug-barge simulator is to train the crew of tugs and barges, especially tugs' crew. It is connected with steering and engine telegraph console and winch control console, and can describe three types of operation mode for a tug-barge working unit, towing mode, side by side and push mode. It can also record and assess each simulation run. The evaluation module can confirm the result of a finished simulation run and help trainees to find and correct their faults, and it is composed of result evaluation and process evaluation.

• Journal of Korea Port Economic Association
• /
• v.35 no.3
• /
• pp.1-18
• /
• 2019

The competition between port authorities (PAs) and terminal operating companies (TOCs) in providing port logistics services has gained importance. The PAs enter into leasing contracts with TOCs in various ways. This study aims to model a contract method that maximizes the joint profit between a PA and a TOC. Particularly, this study aims to model the equilibrium by comparing four types of contract schemes in the non-coordination, cooperation, Cournot, and collusion models. The results of the analysis show that the two-part tariff scheme generates a higher joint profit than the fixed and fee contracts. It is understood that risk- and profit-sharing between the PAs and TOCs helps the latter to maximize the throughput and the joint profit. These results are expected to provide an important theoretical basis for decision-making about port rent and freight between the PAs and TOCs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.163-170
• /
• 2006

This paper presents a approach to the measurement of efficiency. Data envelopment analysis(DEA), as it is called, has particular applicability in the service sector. Applying mathematical programming techniques, DEA enables relative efficiency ratings to be derived within a set of analysed units. This paper investigates the efficiency employing DAE-CCR Model and DEA-BCC Model on data for 15 container terminals covering 1998$^{\sim}$2005 in Korea Results of this paper, suggests to some plan for operation strategy in Container terminals.

• Journal of Korea Port Economic Association
• /
• v.26 no.1
• /
• pp.61-82
• /
• 2010

The purpose of this study is to examine the causuality among export and import trading volume of port of Busan, Kwangyang, Incheon and to induce policy implications. In order to test whether time series data is stationary and the model is fitness or not, we put in operation unit root test, cointegration test. And We apply Granger causality and impulse response and variance decomposition based on VECM. The results indicate that the trading volume of port of Busan is not largely influenced by that of port of Kawangyang and Incheon, but the trading volume of port of Kawangyang and Incheon is largely influenced by other ports including port of Busan. The result suggest that government has to focus on policy that the port of Kawangyang and Incheon can raise its own competitiveness in the world market.

• Journal of the Korean Institute of Navigation
• /
• v.9 no.1
• /
• pp.95-109
• /
• 1985

It has been generally known that the chattering of an AC electromagnetic contactor due to the fluctuation of attracting force is the primary cause of its abrasion and noise. To reduce this chattering effect, an AC electromagnetic contactor is mostly fitted with a shading coil which works the role to make difference in phases of two distinct components of attracting force. The theoretical interpretation of an AC electromagnetic contactor with shading coil and the equation of its attracting force per unit wattage consumed have already been proposed, however, few explications so far have been made on the determination of optimal circuit constants of shading coil. In this paper, the auther constructs a circuit model of an AC electromagnetic contactor with shading coil which is based on the theoretical interpretation of shading coil examined to be valid by experiments under some assumptions, and defines the equation of attracting force without chattering per unit wattage consumed as a performance function for determining the optimal circuit constants of shading coil. And then, the optimal circuit constants maximizing the performance function are determined by means of computer simulation founded on the above circuit model and the characteristics of those circuit constants are examined with special attention to the coupling coefficient.