• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.646-656
• /
• 2008

In this paper, we design and verify the MAC chip of the two-stage AWG-based WDM-PON which considers 128 ONUs and 32 wavelengths. Each wavelength with the capacity of 1Gbps is allocated to ONU for downstream transmission but each wavelength for upstream transmission can be shared by four ONUs. Therefore, MAC protocol is required to avoid the collision and use the network resource efficiently among ONUs which are sharing the same wavelength. To design a request/permit-based MAC protocol, we define a unit-chip module called sub-MAC. The WDM-PON with 128 ONUs can be implemented by using 32 sub-MAC modules. The sub-MAC consists of one control unit, one receipt unit and four transmission units. The state transition diagram of the module is described by the internal/external control signals among the functional units. The function of the sub-MAC module is verified through logic simulation using ModelSIM.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.20-28
• /
• 1997

In this paper, quantization and inverse quantizatio unit, a sa component of MPEG-2 moving picture compression system, ar edesigned. In the processing of quantization, this design adopted newly designed arithmetic units in which quantization matrices and scale code was expressed with SD(signed-digit) code. In the arithmetic unit of inverse quantization, quantization scale code, which has 5-bits length, is splited into two pieces; 2-bits for control code, 3-bits for quantization data, and the method to devise quantization step size is proposed. The design was coded with VHDL and synthesis results in that it consumed about 6,110 gates, and operating speed is 52MHz.

• Transactions of Materials Processing
• /
• v.14 no.3 s.75
• /
• pp.282-290
• /
• 2005

Nowadays, TFT-LCD is widely used as display unit of many digital devices. And, the backlight unit(BLU) is used as a light source of TFT-LCD module. In the backlight unit, the most important component is a light guide, which guides the input light to the TFT-LCD module uniformly. Recently, many researchers have focused on improving the efficiency of BLU by changing the design and structure of a light guide. In the present paper, a series of simulation was performed to find the optimal luminance distribution of emanated light from the given geometry as the first step. From the results of simulations for the light guide with given V-groove pattern, the emanated light from it is mostly affected by the groove angle. In the case of acute angle, about 74 degrees was found as optimal angle to satisfy the restrictions of angular luminance distribution, FWHM, the maximum luminance, etc. However, as far as the average luminance value was concerned, the case of 120 degrees(abtuse angle) was found to be the best while prism films were added to the BLU. As a next step the light guide samples of 74 and 120 degrees were manufactured by DSF method, which was recently proposed by the authors. Of course, most of design parameters were chosen by the aid of simulation results. Finally, the results of average luminance values were compared between the simulation and DSF molded samples.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4267-4275
• /
• 2015

Prefabricated houses are fabricated at the factory for approximately 60 to 80% of the entire construction process, and assembled in the field. In the process of transporting and lifting, internal and external finishes of the unit module are concerned about damages. The purpose of this study is to improve the fixing equipment by analyzing load behavior. The improved fixing equipment would minimize the deformation of internal and external finishes. In order to develop the improved fixing equipment, transporting load on the fixing equipment is analyzed using Monte Carlo simulations, and structural performance is verified by the non-linear finite element analysis. Statistical analysis shows load distribution of unit module is similar with extreme value distribution. Based on the statistical analysis and Monte Carlo simulation, the maximum transporting load is 28.9kN and 95% confidence interval of transporting load is -1.22kN to 9.5kN. The nonlinear structural analysis shows improved fixing equipment is not destructed to the limit load of 35.3kN and withstands the load-bearing in the 95% confidence interval of transporting load.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.4
• /
• pp.603-613
• /
• 2017

The purpose of this study was to develop an scientific inquiry learning module by applying ESD and to verify its effect so that students could understand sustainable development and geology concepts by reconstructing the contents of the geology related unit. For this purpose, the "Volcanoes and Earthquakes" unit in the 3-4 grade group of the Korea national curriculum was selected and the scientific inquiry learning module was developed. The developed inquiry learning module consisted of one textbook and one teacher 's guidebook, and it was put into one class of elementary school to verify the effect. As a result, the teacher said that it was good to be taught contents of ESD and it was useful because of the concreteness of inquiry activities. The students responded that they were interesting because developed textbook is more often the interesting picture and activity than traditional textbook. And the students responded that 'ESD' has been an opportunity to be interested in science.

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.304-314
• /
• 2005

The present study aims to develop animation module-based teaching-learning materials for a unit of middle school 3rd grade science, which contains the movement of the solar system, through the utilization of various forms of multimedia elements. The developed materials consist of 12 in total flash animation modules covering ‘movement of the Earth,’ ‘movement of the Moon,’ movement of the Planets,‘ etc. To analyze the student responses to the science classes to which the developed animation modules were to be applied, the researcher selected for subjects two third-grade classes that were made up of 60 students and later divided for an experimental group and a control group in a middle school located in Jeonju. The experimental group was treated with the animation module-based lessons developed in the present study while the control group was taught in the traditional teacher-centered ways. Tests for the science-related attitudes of the two groups were administered and the results showed that the mean score of the experimental group was significantly higher than the mean score of the control group (p<0.05) in the categories of ‘interest’ and ‘scientific attitude’. It was thus believed that the animation module-based teaching has a positive effect on the categories of ‘interest’ and ‘scientific attitude’. To assess the qualitative dimension of the developed materials, the researcher subjected them to the utilization of the 30 local science teachers and afterwards a survey was done with the 8 crucial items taken from the WBI evaluation test developed by Multimedia Education Support Center in 1998. The result was broadly positive in terms of lesson design and from a technological point of view.

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.29-33
• /
• 2005

In order to recycle the waste material and to develop the thickening unit of waste activated sludge from wastewater treatment facilities, the filtration bio-reactor equipped with a shadow mask filter module was employed for this work from which the operating properties and parameters were drawn. The sludge thickening and filtration unit is made of cylindrical acryl tank(12cm i.d. ${\times}$ 58cm height: working volume of 6L), where the flat-sheet type of shadow mask filter module(pore size: 220~250um, opening area: 34.8~39.6%) was installed and the effluent was withdrawn from the effluent port at the lowest point of the reactor, and the filtration was performed only by the hydraulic pressure. For evaluating the operating performance of this reactor, some parameters such as the solid-liquid separation of different biomass concentrations, the water quality of filtrate, the aeration cleaning time and the cleaning effect were investigated. Depending on the MLSS concentrations, the different time to withdraw 3L of filtrate was required in which the longer filtration time was necessary for the higher MLSS concentrations caused by the thicker formation of cake layer: 40 minutes for 5,000 mg/L, 70 minutes for 10,000 mg/L and 100 minutes for 15,000 mg/L, where the concentrations of SS were 8.9, 6.7 and 6.5 mg/L, respectively. Under the same operating conditions (the intensity of aeration cleaning: 80 L/min, MLSS: 10,000 mg/L), the proper aeration cleaning time was revealed 30 seconds, and the stable formation of cake layer was in the range of 10 to 15 minutes. Therefore, the shadow mask considered as a waste material can be of use as a filter material for the sludge thickening system.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.351-362
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model, semi-distributed model, first divides the watershed into multiple subwatersheds, and then extracts the basic computation element, called the Hydrologic Response Unit (HRU). In the process of HRU generation, the spatial information of land use and soil maps within each subwatershed is lost. The SWAT model estimates the HRU topographic data based on the average slope of each subwatershed, and then use this topographic datum for all HRUs within the subwatershed. To improve the SWAT capabilities for various watershed scenarios, the Spatially Distributed-HRU (SD-HRU) pre-processor module was developed in this study to simulate site-specific topographic data. The SD-HRU was applied to the Hae-an watershed, where field slope lengths and slopes are measured for all agricultural fields. The analysis revealed that the SD-HRU pre-processor module needs to be applied in SWAT sediment simulation for accurate analysis of soil erosion and sediment behaviors. If the SD-HRU pre-processor module is not applied in SWAT runs, the other SWAT factors may be over or under estimated, resulting in errors in physical and empirical computation modules although the SWAT estimated flow and sediment values match the measured data reasonably well.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• Honam Mathematical Journal
• /
• v.35 no.4
• /
• pp.747-755
• /
• 2013

This paper deals with the unit groups of the endomorphism rings of projective modules over polynomial rings and further over formal power series rings. A normal subgroup of the unit group is defined and discussed. The local splitting properties of element of endomorphism rings of projective modules over polynomial rings are given.