• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.765-774
• /
• 2009

Fiber Dyeing and Finishing facility has been recognized as an important pollution source due to its consumption of large volumes of water and chemicals. Unit mass discharge for the conventional water quality parameters such as flowrate, SS, $BOD_5,\;COD_{Mn},\;COD_{Cr}$, TN, TP were estimated. To represent the respective industries, three companies were carefully selected based on its manufacturing goods, flowrate and location at various unit operations and processes. More than 90% of decrease in unit mass estimation between influent and effluent of BOD was observed. But the values themselves were similar to those of Fiber Manufacturing facility due to the high loadings of organic matter. Biodegradability of influent was almost three times higher than that of effluent. Unit mass discharge estimations of unit process (estimated in this study) based on space, products and raw material were similar to those of composite process (estimated by National Institute of Environmental Research), while big difference was observed in the other factors. Unit mass discharge factors calculated in this study can be used as the reference for the estimation of water pollution loading costs in Nakdong river basin. For the effective water pollution control and management, it is essential to characterize the various types of water quality parameters from the effluents of individual industrial wastewater treatment plants.

• Journal of the Korean housing association
• /
• v.18 no.3
• /
• pp.125-136
• /
• 2007

To improve the environment of individual residential area, the uniform development of multiple dwellings through site should be avoided. As an alternative to a large scale development of the currently popular high-density and high-rise apartment buildings, which disintegrates and destroys existing communities, a new residential type that is applicable to the individual residential area should be developed. From the new residential type, even for short history of Korea of modem urban residence, a new concept of residence can be formed, changing from the concept of a temporary staying place to the concept of a stable residing place. Also, a gradual improvement that transcends time can be expected, and the present and past appearances can co-exist. This study was conducted to suggest a new residential type with unit blocks that can improve the physical structure of existing individual residential area without destroying the structure. That is, among the factors that comprise the individual residential area, this study will focus on the unit block with a medium role between a site and a mega-block, and will suggest a new concept of residential unit in order not to destroy its physical structure. The physical characteristics of the unit block will also be analyzed.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.81-90
• /
• 2010

The existing most studies on the apartment sales prices have been limited to relatively small size apartment complexes and have not categorized the apartment complexes based on the number of households. Some of them uses the apartment-related indices such as regional value estimates, sales unit price, and view right values. In the case of Seoul Metropolitan Area, the size of apartment complex has been growing to the level of large complex over more than 1,000 households through new town development, redevelopment and reconstruction. People prefers to choose a large scale complex instead of small complex based on their perception that a large scale apartment complex provides more conveniences in living. The result of this analysis revealed that the variables chosen as important determinants of the hedonic price model for large scale apartment complexes were square meters of apartment unit, rent/price ratio, number of bays, distance to the nearest subway station, and heating system method. This means that the sales price of apartment unit will be higher as the square meters of apartment unit increase, as the rent/price ratio decreases, as the distance to the nearest subway station increases, and as the number of bays increase.

• Archives of design research
• /
• v.16 no.2
• /
• pp.111-120
• /
• 2003

This paper shows a study on a design method and its process for personalization of the industrial fabricated products, and a unit construction system design as its result. Hence this study is starting at a point, the meaning of the personalization in the industrial society to make dear, the using process to analysis with a systematic approaching method and the system of the using process to define. The system of the using process is related in the functions of the industrial product. Therefore a unit which makes up the system of the using process is defined with the technical system theory of the industrial product, and then a design of the system that is made of that units is clarified as a open system. And the propriety and the boundary of the unit construction system design is cleared up by its practical experiment with the personal computer.

• Asian Oncology Nursing
• /
• v.7 no.1
• /
• pp.26-35
• /
• 2007

Purpose: The purpose of this study was to set the strategy that clinical nurses can efficiently cope with the stress from bereavement care, by examining and analyzing stress factors and coping methods of nurses' bereavement care. Methods: A total of 628 nurses were recruited from four university hospitals, two cancer specialized hospitals, and three public hospitals. Stress was measured using the bereavement care stress measurement tool, and coping was done using the cope with stress scale. Results: The stress level about bereavement care of the nurses working in the cancer unit was significantly higher than the level of the nurses working in the general unit. However, there was no difference of coping level between nurses working in cancer unit and general unit. Conclusions: It is important to ensure the methods that contrive to perform bereavement care efficiently by generating hospice nurses and by activating the system for nurses specialist who perform bereavement care.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.577-582
• /
• 2012

Recently, noise reduction of air-conditioner is one of the important design factors for high quality product. Especially, customer complaints arise due to noise problem of the outdoor unit. After the operation of air-conditioner start, noise level of outdoor unit is increased gradually and sometimes abnormal noise occurs until it reaches steady state condition. The aim of this paper is to investigate the relation between noise of outdoor unit and thermodynamic properties of cycle at transient condition of room air-conditioner. In order to find out the noise characteristics of outdoor unit, noise and vibration measurements are carried out. Also, the thermodynamic properties of compressor and heat exchanger are measured by using temperature and pressure sensors and experimental results are discussed. Finally, we find out the relation between noise and cycle properties at starting of room air-conditioner and the improvement method to reduce noise level is proposed.

• Industrial Engineering and Management Systems
• /
• v.9 no.2
• /
• pp.107-120
• /
• 2010

In today's uncertain economic environment, the evaluation of safety for investment alternatives is of practical importance in manufacturing companies. This paper examines a method of quantitatively evaluating profitability and risk for multiple alternatives using the total-cost unit-cost domain. The paper assumes such factors as unit sales price, sales and production volume, unit variable cost, fixed cost, and yield for each alternative. The paper incorporates the relationship between production capacity and demand, distinguishing between cases of production capacity surplus and shortage for each year over the entire planning horizon. The paper investigates the case in which the values of each factor independently move in the direction of decreasing profit each year, and clarifies the procedure of comparing safety among multiple investment alternatives on a single consolidated total-cost unit-cost domain. The difficulty of the problem lies in the method of consolidating multiple total-cost unit-cost domains into a single domain since the combination of years of capacity surplus and shortage depends upon the change values in each factor under consideration. A systematic method of evaluating profitability as well as risk is presented, and the validity of the proposed method is verified using a numerical example.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.914-925
• /
• 2011

The variation of streamflow is regarded as one of the most influential factors on the fluctuation of water quality in the stream. The characteristics of the variation should be taken into account in the plans for the management of Total Maximum Daily Loads (TMDLs). This study analysed and characterized spatial distribution and temporal variation of streamflow at each unit watershed in Guem-river basin. For the analysis of the distribution of streamflow, the type and the extent of the distribution were investigated for the unit watershed. For the analysis of the variation, short and long term changes of streamflow were examined. The result showed that most of the distributions were not log-normalized and the extent of variation tends to be greater at the unit watershed placed on the tributaries in the basin. A kind of margin could be granted to the unit watershed involving high variations so as to establish the water quality goal and load allotment more reasonably and effectively in view of whole waterbody.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.109-110
• /
• 2022

Currently, interest in the quality of concrete is increasing. Among the important factors for evaluating the quality of concrete, interest in unit-water content is also increasing. Currently, the air-meter method, the microwave oven drying method, the capacitance method, and the microwave penetration method are used to measure the unit-water content of concrete.. Among the above methods, except for the microwave method, the measurement method is complicated, portability is reduced, and economic efficiency is reduced. This research aims to measure a unit-water content by using a Frequency Domain Reflectometry(FDR) sensor that is economical, simple to measure, and portable among microwave methods. In addition, it is an experimental study to determine the accuracy of unit-water content using a single input residual model during deep learning to solve the limitations of the FDR sensor.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.8-9
• /
• 2021

The unit-water content of concrete is one of the important factors in determining the quality of concrete and is directly related to the durability of the construction structure, and the current method of measuring the unit-water content of concrete is applied by the Air Meta Act and the Electrostatic Capacity Act. However, there are complex and time-consuming problems with measurement methods. Therefore, high frequency moisture sensor was used for quick and high measurement, and unit-water content of mortar was evaluated through machine running and deep running based on measurement big data. The multi-input deep learning model is as accurate as 24.25% higher than the OLS linear regression model, which shows that deep learning can more effectively identify the nonlinear relationship between high-frequency moisture sensor data and unit quantity than linear regression.