• Title/Summary/Keyword: Uniform traffic

Search Result 126, Processing Time 0.024 seconds

A Study on the Speed Variation Characteristics According to Tunnel Intervals in the Continuous Tunnel Conditions (연속터널구간에서 터널간격에 따른 속도변화특성에 관한 연구)

  • 정충근;서승환;원제무
    • Journal of Korean Society of Transportation
    • /
    • v.20 no.2
    • /
    • pp.47-58
    • /
    • 2002
  • This thesis is based on the speed variations which are observed both in a sing1e tunnel and a continuous tunnel. Kumdae II tunnel and Chiak I tunnel of Jungang Expressway are selected in order to analyze the characteristics of speed variations according to tunnel intervals I place importance on the computation of tunnel intervals according to the speed variations. there's a summary of the results. The results of the study reveal that speed changes occur both on 1km ahead of tunnel and within the tunnel. The speed change amounts to 7.1km/hr(6.7%) on these survey Points 2.7km/hr (2.9%) on access points, and from -3.6km/hr (-3.8%) to, +4.1km/hr(+4.7%) irregularly on egress points. The magnitude of speed chance appears small on the survey points where an interval of tunnel is short whereas the speed chance turn out to be rather significant on the points where the tunnel interval is long. The analysis of tunnel distances using multiple regression models shows that the appropriate tunnel distance turns out to be 732m. The distance of 732m seem to be providing a fecundation for uniform traffic flow in continuous tunnel conditions.

Dynamic-size Multi-hop Clustering Mechanism based on the Distance in Sensor Networks (센서 네트워크에서의 거리에 따른 동적 크기 다중홉 클러스터링 방법)

  • Ahn, Sang-Hyun;Lim, Yu-Jin
    • The KIPS Transactions:PartC
    • /
    • v.14C no.6
    • /
    • pp.519-524
    • /
    • 2007
  • One of the most important issues on the sensor network with resource limited sensor nodes is prolonging the network lifetime by effectively utilizing the limited node energy. The most representative mechanism to achieve a long lived sensor network is the clustering mechanism which can be further classified into the single hop mode and the multi hop mode. The single hop mode requires that all sensor nodes in a cluster communicate directly with the cluster head(CH) via single hop md, in the multi hop mode, sensor nodes communicate with the CH with the help of other Intermediate nodes. One of the most critical factors that impact on the performance of the existing multi hop clustering mechanism is the cluster size and, without the assumption on the uniform node distribution, finding out the best cluster size is intractable. Since sensor nodes in a real sensor network are distributed non uniformly, the fixed size mechanism may not work best for real sensor networks. Therefore, in this paper, we propose a new dynamic size multi hop clustering mechanism in which the cluster size is determined according to the distance from the sink to relieve the traffic passing through the CHs near the sink. We show that our proposed scheme outperforms the existing fixed size clustering mechanisms by carrying out numerical analysis and simulations.

Analysis of Moment Effect of Bridge Design Live Load KL-510 by Statistical Analysis of WIM Data of Expressway (고속도로 WIM 데이터의 통계분석을 통한 교량 설계활하중 KL-510의 모멘트 효과 분석)

  • Paik, Inyeol;Jeong, Kilhwan
    • Journal of Korean Society of Steel Construction
    • /
    • v.29 no.6
    • /
    • pp.467-477
    • /
    • 2017
  • The live load effect of KL-510 of the current Korean bridge design code is examined by comparing with that of the multiple trucks of which the weights are statistically estimated from measured traffic data as well as with those of the related live load models. The truck weight data measured on the expressway before and after overweight enforcement are used to obtain the truck weights following the same procedures in deciding the live load model of the design codes and the results are compared with the load effect of KL-510. KL-510 yields a very uniform loading effect compared with the multiple truck effects when the weights are estimated from the data which contains some of the heavy trucks over the operational weight limit. KL-510 yields consistent results with the live load of AASHTO LRFD and shows less variation than the past load model DB-24 over the span lengths considered in this study. As a result of this research, the actual truck combinations equivalent to the notional KL-510 load model are constructed and it can be applied to the evaluation of the existing bridge and the calibration of the load factor of the permit vehicle.

A study on the operation characteristics of oversized exhaust port applicable to double-deck tunnel (복층터널에 적용 가능한 화재 연동형 대배기구 운영 특성 분석 연구)

  • Park, Jinouk;Yoo, Yongho;Kim, Yangkyun;Park, Byoungjik;Kim, Whiseong
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.21 no.6
    • /
    • pp.887-895
    • /
    • 2019
  • Recently, the number of underground road development projects has been increasing to solve traffic problems in the national capital region and metropolitan areas with intensified overcrowding, and there has been a tendency to plan underground roads by applying a double-deck tunnel technology that has advantages in constructability and economical efficiency. The double-deck tunnel has a structure where one excavation section is divided into two parts and used as up and down lines, and is mainly used as a road for small vehicles only due to its low floor height. In addition, due to the small cross-sectional area, it has characteristics different from those of general road tunnels in terms of ventilation and disaster prevention. In this regard, this study proposed an operational plan that applies an oversized exhaust system, which is one of semi-transverse ventilation systems, to small cross-sectional tunnels like double-deck tunnel with low floor height, and a comparative analysis between smoke exhaust characteristics according to the fire occurrence locations and oversized exhaust systems was conducted using the Fire Dynamics Simulator (FDS). The results showed that unlike uniform exhaust, intensive smoke exhaust using the oversized exhaust port maximized the delay effect of smoke diffusion and limited the smoke within 50 m above and below the fire point.

An Energy Balanced Multi-Hop Routing Mechanism considering Link Error Rate in Wireless Sensor Networks (무선 센서 네트워크의 링크 에러율을 고려한 에너지소모가 균등한 멀티 홉 라우팅 기법)

  • Lee, Hyun-Seok;Heo, Jeong-Seok
    • Journal of the Korea Society of Computer and Information
    • /
    • v.18 no.6
    • /
    • pp.29-36
    • /
    • 2013
  • In wireless sensor networks, energy is the most important consideration because the lifetime of the sensor node is limited by battery. Most of the existing energy efficient routing protocols use the minimum energy path to minimize energy consumption, which causes an unbalanced distribution of residual energy among nodes. As a result, the power of nodes on energy efficient paths is quickly depletes resulting in inactive. To solve these problems, a method to equalize the energy consumption of the nodes has been proposed, but do not consider the link error rate in the wireless environment. In this paper, we propose a uniform energy consumption of cluster-based multi-hop routing mechanism considering the residual energy and the link error rate. This mechanism reduces energy consumption caused by unnecessary retransmissions and distributes traffic evenly over the network because considering the link error rate. The simulation results compared to other mechanisms, the proposed mechanism is energy-efficient by reducing the number of retransmissions and activation time of all nodes involved in the network has been extended by using the energy balanced path.

A geographical study of the Korean Tobacoo forming region (韓國 煙草載培地域의 地理學的 硏究)

  • ;Kim, Kwang Ja
    • Journal of the Korean Geographical Society
    • /
    • v.21
    • /
    • pp.16-37
    • /
    • 1980
  • The purpose of this study is to clarify how the Korean tobacco farming region has been geographically formed by natural and cultural environments, and to examine and cultural environments, and to examine whether it can be recognized as a major part of agricultultural regions. The questions asked in this study are associated with the spatial diffusion of tobacco cultivation, the patterns and processes of the farming region from 1900 to 1960, and the regional characteristics of the concentrated farming area since 1960. The study is inductively approached and most data used were collected from old records and field works. The delineation of the tobacco farming region was derived by applying the concept of the uniform region. Tobacco was introduced through Japan during the years of Kwang Hae Kun (1616-1622). According to the old records, three places, Waekwan, Dongrae, and Ulsan, were the first tobacco raising areas. In the 1700's the well-known tobacco farming regions were scattered all around the nation in places like Jinan, Samdeung, Seongcheon, Gangdong, Yeongweol and Yeongyang. This distributon pattern suggests that tobacco farming in Korea developed spatially along main traffic routes before the 1700's. Untill the 1920's the pattern of tobacco regions was relatively static. Since the 1920's, it has shown a pattern of concentration in the Choongbuk province, where the new highly productive yellow tobacco has been introduced. It was not until the 1960's that yellow tobacco instead of the native variety came to be cultivated all over the country. In the 1960's, the tobacco farming region tended to be concentrated and localized in north western Choongnam, northern Cheonbuk, Choongbuk, and Kyeongbuk including Cheongsong, Andong, and Yeongyang. Since 1970, tobacco production has declined in some of the former major areas of cultivation in terms of its density, while there have appeared highly concentrated areas in Cheongsong and Andong, centered around Yeongyand. There has also emerged a secondary major concentrated area along the coast including such places as Kochang, Yeongkwang and Mooan. The appearance of the Yeongyang tobacco area as the most important core region can be described as follows; at first this area has the disadvantage of being in competition with other places for selling cash crops besides tobacco, because it is located in a mountain zone and it is far from the major metropolises of Seoul and Pusan. Thus has been formed the farming mentality that agricultural management makes the most profit on farming tobacco because tobacco is stable in price and selling routes. As a result of this longstanding belief, these areas (Yeongyang, Cheongsong and Andong) have developed into tobacco concentrated regions. Finally, the tobacco concentrated regions of Korea have changed through time. The factors affecting this change have been the kind of tobacco grown, the monopoly system, agricultural techniques and the expansion of arable land through the clearing of slopes. In conclusion, the research indicates that the localized and concentrated patterns of tobacco cultivation are geographically typical. Thus, recognition of tobacco farming region is important to understanding the agricultural region of Korea as a whole.

  • PDF