• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.142-145
• /
• 2004

[ $Pb(Zr_{0.8}Ti_{0.2})TiO_3$ ] powder were prepared by the sol-gel method using a solution of Pb-acetate, Zr n-propoxide and Ti iso-propoxide. PZT thick film were fabricated by the screen printing method. and then the structural properties as a function of the sintering temperature were studied. PZT film thickness, obtained by four screen printing, was approximately $70{\sim}90{\mu}m$. The PZT thick film, sintered at $1050^{\circ}C$, showed deuse and uniform grain stractures and percent porosity of the thick film was 25.43%.

• 소성∙가공
• /
• 제12권5호
• /
• pp.449-456
• /
• 2003

Multi-step induction heating process was applied to the powder compact melting technique as a new heating process to achieve pinpoint accuracy, faster cycle time, repeatability, non-contact and energy-efficient heat in a minimal amount of time. The objective of this study is the establishment of the input data diagram of multi step induction heating process for automation of the fabrication process of 6061 Al foams with desired density. At first, proper induction coil was designed to obtain a uniform temperature distribution over the entire cross sectional area of specimen. By using this coil, foaming experiments were performed to investigate the multi-step induction heating conditions such as capacity, temperature and time conditions of each heating and holding step. On the basis of the obtained multi-step induction heating conditions, relationship between final heating temperature and fraction of porosity was investigated.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.181-194
• /
• 2023

The primary objective of this study is to examine the influence of geometry on the stability characteristics of cylindrical microstructures. This investigation entails a stability analysis of a bi-directional functionally graded (BD-FG) cylindrical imperfect concrete beam, focusing on the impact of geometry. Both the first-order shear deformation beam theory and the modified coupled stress theory are employed to explore the buckling and dynamic behaviors of the structure. The cylinder-shaped imperfect beam is constructed using a porosity-dependent functionally graded (FG) concrete material, wherein diverse porosity voids and material distributions are incorporated along the radial axis of the beam. The radius functions are considered in both uniform and nonuniform variations, reflecting their alterations along the length of the beam. The combination of these characteristics leads to the creation of BD-FG configurations. In order to enable the assessment of stability using energy principles, a numerical technique is utilized to formulate the equations for partial derivatives (PDEs).

• 한국결정성장학회지
• /
• 제31권4호
• /
• pp.182-189
• /
• 2021

무기질 단열재 개발을 위해 포말법을 이용하여 다공성 세라믹스를 제조하였다. 실리카 흄과 SiO₂를 주 원료로 사용하였으며, 다공성 세라믹의 균일한 기공 형성을 위한 첨가제로 벤토나이트를 사용하였다. 다공성 세라믹은 1200℃에서 소결하였으며, 기공율, 밀도, 압축강도, 미세구조 그리고 열전도도 분석을 수행하였다. 다공성 세라믹은 SiO₂에 대한 실리카흄의 함량이 70~90 % 증가할수록 비중이 0.63에서 0.69로 증가하였으며, 압축강도는 9.41 Mpa에서 12.86 Mpa로 증가하였다. 그러나, 기공율은 비중과 반대로 72.07 %에서 70.82 %로 감소하는 경향을 나타내었다. 열전도도 측정 결과, 실리카 흄의 함량이 70 %인 F7S3 다공성 세라믹의 경우 25~800℃ 온도조건에서 0.75~0.72 W/m·K의 열전도도를 나타내었으며, 실리카 흄의 함량이 90 %인 F9S1 다공성 세라믹의 경우 0.66~0.86 W/m·K를 나타내어 실리카 흄 함량이 적을수록 낮은 열전도도를 나타내었다. 이는 기공율 결과와 일치한 것을 확인하였다. SEM(Scanning Electron Microscope)을 이용한 미세구조 분석 결과, 다공성 세라믹 내/외부에 전체적으로 수십~수백 ㎛ 범위 기공이 관찰되었으며 기공 분포가 비교적 균일한 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1247-1252
• /
• 2004

The present paper is devoted to the modeling method based on an averaging approach for thermal analysis of microchannel heat sinks subjected to the uniform wall temperature condition. Solutions for velocity and temperature distributions are presented using the averaging approach. When the aspect ratio of the microchannel is higher than 1, these solutions accurately evaluate thermal resistances of heat sinks. Asymptotic solutions for velocity and temperature distributions at the high-aspect-ratio limit are alsopresented by using the scale analysis. Asymptotic solutions are simple, but shown to predict thermal resistances accurately when the aspect ratio is higher than 10. The effects of the aspect ratio and the porosity on the friction factor and the Nusselt number are presented. Characteristics of the thermal resistance of microchannel heat sinks are also discussed.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.67-74
• /
• 2003

Barrier ribs for PDP(plasma display panel) are commonly utilized to have uniform height and width and to prevent opical crosstalk between adjacent cells. The requirements for such barrier ribs are uniform height and shape, low outgassing rate and low porosity, high aspect ratio, and fine resolution. In this study, we are studied about that to make efficiency of material and high quality barrier ribs for PDP. As a result, could got high barrier ribs of $140{\mu}m$ evenly in 1th phenomenon using watersoluble UV curing resin and know that flatness of upper part is also very good.

• Advances in Computational Design
• /
• 제5권4호
• /
• pp.349-362
• /
• 2020

Dynamic characteristics of a scale-dependent porous metal foam cylindrical shell under a traveling load have been explored within this article based on a numerical approach. Within the material texture of the metal foams, uniform and non-uniform porosities may be dispersed. Based upon differential quadrature method (DQM) and Laplace transforms, the equations of motion for a shear deformable scale-dependent shell may be solved numerically. Scale-dependent shell modeling has been provided based upon strain gradient elasticity. Solving the equations will give the shell deflection as a function of load speed. Also, it is reported that shell deflection relies on the porosity dispersion and strain gradient influences.

• 에너지공학
• /
• 제2권1호
• /
• pp.114-122
• /
• 1993

A model describing the reaction rate and catalyst deactivation in a simplified reaction system was developed to investigate the significance of catalyst pore structure in terms of porosities, porosity ratios, and size ratios of reactants to pores. The model showed that the unimodal catalyst could give a better performance than the bimodal in certain circumstances and the crossover found in the reactivity curves resulted from a trade-off between surface area and diffusivity. Under the assumption of uniform coke buildup, the bimodal catalyst appeared to provide better resistance to deactation than unimodal catalyst.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.266-270
• /
• 2014

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction of pores. In particular, open, penetrating pores are necessary for industrial applications such as in high temperature filters and as a support for catalysts. In this study, Fe foam with above 90% porosity and 2 millimeter pore size was successfully fabricated by a slurry coating process and the pore properties were characterized. The Fe and $Fe_2O_3$ powder mixing ratios were controlled to produce Fe foams with different pore size and porosity. First, the slurry was prepared by uniform mixing with powders, distilled water and polyvinyl alcohol(PVA). After slurry coating on the polyurethane(PU) foam, the sample was dried at $80^{\circ}C$. The PVA and PU foams were then removed by heating at $700^{\circ}C$ for 3 hours. The debinded samples were subsequently sintered at $1250^{\circ}C$ with a holding time of 3 hours under hydrogen atmosphere. The three dimensional geometries of the obtained Fe foams with an open cell structure were investigated using X-ray micro CT(computed tomography) as well as the pore morphology, size and phase. The coated amount of slurry on the PU foam were increased with $Fe_2O_3$ mixing powder ratio but the shrinkage and porosity of Fe foams were decreased with $Fe_2O_3$ mixing powder ratio.

• 공업화학
• /
• 제10권1호
• /
• pp.160-165
• /
• 1999

Gel 표준 물질의 핵자기 공명적 완화 성질들이 다공성 매체내 유체의 핵자기 공명적 완화 성질들과 잘 부합될 수 있기 때문에, agarose gel은 다공성 매체내 유체의 성질을 측정하기 위한 표준 물질로 사용될 수 있다. 다공성 매체의 세공도(porosity)와 포화도(saturation)를 결정하기 위한 표준물질의 사용을 논의하였고, gel의 핵자기 공명적 성질에 대한 필요조건들도 제시하였다. 2.0 Tesla에서 측정된 agarose gel의 완화시간은 agarose 농도와 상자기성 불순물의 ($CuSO_4$) 농도 함수로 표시하였고, agarose gel 조성과 완화시간 사이의 실험적 결과를 나타내었다. 세공도 분포에 대한 평균값은 17.7%이고, 이 값은 중량 분석법에 의해 계산된 값과 잘 일치한다. 끝으로, agarose gel을 표준 물질로 사용한 비혼화성 2상 유체실험을 수행하였다. 포화 profile들은 균일한 다공성 매체내에서 일차원 치환실험을 했을 때 계산된 결과와 잘 일치하고 있다.