• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1618-1629
• /
• 2003

The effects of the interaction between flow field and heat transfer caused by the longitudinal vortices are experimentally investigated using a five hole probe and a transient liquid crystal technique. The test facility consists of a wind tunnel with vortex generators protruding from a bottom surface and a mesh heater. In order to control the strength of the longitudinal vortices, the angle of attack of vortex generators used in the present experiment is 20$^{\circ}$, and the spacing between the vortex generators is 25mm. The height and cord length of the vortex generator is 20mm and 50mm, respectively. Three-component mean velocity measurements are made using a f-hole probe system, and the surface temperature distribution is measured by the hue capturing method using a transient liquid crystal technique. The transient liquid crystal technique in measuring heat transfer has become one of the most effective ways in determining the full surface distributions of heat transfer coefficients. The key point of this technique is to convert the inlet flow temperature into an exponential temperature profile using the mesh heater set up in the wind tunnel. The conclusions obtained in the present experiment are as follows: The two maximum heat transfer values exist over the whole domain, and as the longitudinal vortices move to the farther downstream region, these peak values show the decreasing trends. These trends are also observed in the experimental results of other researchers to have used the uniform heat flux method.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.224-243
• /
• 1997

The study examines the similarities of competitive strategy between fashion industry and high-tech industry through a case study of a Japanese maker. From the study, some implications are drawn for the Korean fashion industry. It is hoped that this, will help towards establishing a suitable competitive strategy for firms in this industry. In the fashion industry, the product life cycle is so short as to prompt a new product obsolete too quickly, and the extent of product differentiation is remarkably extensive compared to any other industry. Generally speaking, firms in this industry focus more of their resources on product development and marketing rattler than on production and they attempt to maneuver the speed when they are required to enhance their competitive edge. This is enabled through being, as one might expect, information- and technology- intensive as are high-tech industries. In this sense, that of the competitive strategy of a firm in fashion industry to be similar to high-tech industry. The Japanese firm Y has transformed itself a leading firm in fashion uniform segment. The firm could achieve this status by integrating each function needed for creating customer*s value, that is, product development, production and marketing within one Quick Response System. For this purpose, Y introduced a bundle of high-tech communication systems such as SPD, SDS, ATOM, NICS and so on. In this sense it can be said that Y was aware of what sort of competitive strategy was required in the industry. Implications for Korean firms is that, first, the magnitude of understanding the industry specific factors in establishing competitive strategy in the fashion industry, are speed, flexibility and systematic integration supported by high technology which are characteristic of high-tech industries. Secondly, as can be seen in the fact that Y emphasized logistics in its technological transformation, the significance of logistics control is a key to manipulating speed and flexibility in the industry. To sum up, those who have insight into above findings will be likely to keep their competitiveness in the industry not only in the Korean market but also in global market in the near future.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.26-35
• /
• 2009

In this paper, we investigate how to do resource allocation to guarantee a minimum user data rate at low signaling overhead in multi-cell orthogonal frequency division multiple access (OFDMA) wireless systems. We devise dynamic resource allocation (DRA) algorithms that can minimize the QoS violation ratio (i.e., the ratio of the number of users who fail to get the requested data rate to the total number of users in the overall network). We assume an OFDMA system that allows dynamic control of frequency reuse factor (FRF) of each sub-carrier. The proposed DRA algorithms determine the FRFs of the sub-carriers and allocate them to the users adaptively based on inter-cell interference and load distribution. In order to reduce the signaling overhead, we adopt a hierarchical resource allocation architecture which divides the resource allocation decision into the inter-cell coordinator (ICC) and the base station (BS) levels. We limit the information available at the ICC only to the load of each cell, that is, the total number of sub-carriers required for supporting the data rate requirement of all the users. We then present the DRA with limited coordination (DRA-LC) algorithm where the ICC performs load-adaptive inter-cell resource allocation with the limited information while the BS performs intra-cell resource allocation with full information about its own cell. For performance comparison, we design a centralized algorithm called DRA with full coordination (DRA-FC). Simulation results reveal that the DRA-LC algorithm can perform close to the DRA-FC algorithm at very low signaling overhead. In addition, it turns out to improve the QoS performance of the cell-boundary users, and achieve a better fairness among neighboring cells under non-uniform load distribution.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.83-91
• /
• 2017

The Manual on Uniform Traffic Control Devices advises that, "Signs should be placed on the right side of the roadway where they are easily recognized and understood by road users." Guidance is provided on the spacing and prioritization of signs, and in some conditions, additional steps may be needed to ensure that signs are conspicuous. This study proposes a design methodology using ergonomics concepts applied to traffic sign and street name signs. Initially, a literature revision on cognitive ergonomics is performed. Several design methodologies are analyzed and the aspects to be considered in traffic signs are selected.. In this study, problems of traffic signs in Korea were identified through the comparative analysis of domestic and foreign traffic signs and a prototype of ergonomic traffic sign was developed based on the analysis results. And the driver's views on the developed traffic sign were investigated. In addition, based on the results of this study, this study is to provide the necessary foundation for improving traffic signs in order to help the various age groups of drivers to reach their destinations without difficulties when they drive.

• Smart Structures and Systems
• /
• v.19 no.3
• /
• pp.309-322
• /
• 2017

In this paper, the buckling, and free vibration analysis of tapered functionally graded carbon nanotube reinforced composite (FG-CNTRC) micro Reddy beam under longitudinal magnetic field using finite element method (FEM) is investigated. It is noted that the material properties of matrix is considered as Poly methyl methacrylate (PMMA). Using Hamilton's principle, the governing equations of motion are derived by applying a modified strain gradient theory and the rule of mixture approach for micro-composite beam. Micro-composite beam are subjected to longitudinal magnetic field. Then, using the FEM, the critical buckling load, and natural frequency of micro-composite Reddy beam is solved. Also, the influences of various parameters including ${\alpha}$ and ${\beta}$ (the constant coefficients to control the thickness), three material length scale parameters, aspect ratio, different boundary conditions, and various distributions of CNT such as uniform distribution (UD), unsymmetrical functionally graded distribution of CNT (USFG) and symmetrically linear distribution of CNT (SFG) on the critical buckling load and non-dimensional natural frequency are obtained. It can be seen that the non-dimensional natural frequency and critical buckling load decreases with increasing of ${\beta}$ for UD, USFG and SFG micro-composite beam and vice versa for ${\alpha}$. Also, it is shown that at the specified value of ${\alpha}$ and ${\beta}$, the dimensionless natural frequency and critical buckling load for SGT beam is more than for the other state. Moreover, it can be observed from the results that employing magnetic field in longitudinal direction of the micro-composite beam increases the natural frequency and critical buckling load. On the other hands, by increasing the imposed magnetic field significantly increases the stability of the system that can behave as an actuator.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.648-652
• /
• 2009

Ceramic fiber separator is the promising material for thermal battery system because it reduces the production cost and offers the potential to a new application compared to a pellet type electrolyte. The electrolyte separator for thermal battery should be easily handled and loaded a large amount of the molten lithium salt. Ceramic fibers were used as an electrolyte separator and the lithium based molten salts were infiltrated into the ceramic filters. Leakage of molten salt (several lithium salts) leads to short-circuit during the thermal battery operation. In this study, a uniform and fine SiOC mat with fibers ranging from 1 to 3 ${\mu}m$ was obtained by electrospinning of polycarbosilane and pyrolysis. The optimum spinning conditions for obtaining fine diameters of SiOC fiber were controlled by the solution composition and concentration, applied voltage and spinning rate, release rate by porosity. The pore structures of the ceramic filter and the melting properties of the lithium salts affected to the electrolyte loading and leakage. The importance of the fiber size and porosity and their control was discussed and the mechanical properties were also discussed.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.428-434
• /
• 2017

In recent years, owing to the growing user demand for the two-way internet service based on the mobile global broadband communications, a new type of satellite terminal has been developed, known as ESIM(Earth Station in Motion). This service was required by Resolution 158(WRC-15) to study on the coexistence with the co-primary FS(Fixed Service) in 27.5-29.5 GHz as a FSS(Fixed Satellite Service) uplink. In this paper, the average received power on ESIM within -10 dB of beam width of FS and its outage probability was analyzed theoretically and also simulated to account for the azimuth angle with uniform distribution. From the results, it can be concluded that this theoretical analysis is very useful to analyze the interference from ESIM into FS based on the statistical and probabilistic method. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the inclination angle of moving path, the operation hours, and the speed of ESIM to protect the co-primary FS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.160-160
• /
• 2010

Organic electronic devices require a passivation layer to ensure sufficient lifetime. Specifically, flexible organic electronic devices need a barrier layer that transmits less than $10^{-6}\;g/m^2/day$ of water and $10^{-5}\;g/m^2/day$ of oxygen. To increase the lifetime of organic electronic device, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. In this study, the passivation layer was deposited using single-process PEALD. The passivation layer, in our case, was a bilayer system consisting of $Al_2O_3$ films and a $TiO_2$ buffer layer on a poly (ether sulfon) (PES) substrate. Because the deposition temperature and plasma power have a significant effect on the properties of the passivation layer, the characteristics of the $Al_2O_3$ films were investigated in terms of density under different deposition temperatures and plasma powers. The effect of the $TiO_2$ buffer layer also was also addressed. In addition, the water vapor transmission rate (WVTR) and organic light-emitting diode (OLEDs) lifetime were measured after forming a bilayer composed of $Al_2O_3/TiO_2$ on a PES substrate.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.1
• /
• pp.6-11
• /
• 2018

The anodic oxidation behavior of Si-containing aluminum alloy for diecasting was investigated. Especially, the property changes during anodization both on aluminum 1050 and 9 weight percentage silicon containing aluminum (Al-9Si) alloys were analyzed by the static current test. In order to fabricate a uniform anodic oxidation film by effect of Al-Si compound, nitric acid containing hydrofluoric acid had been used as a desmutter for aluminum alloy after alkaline etching. It was found that the level of voltage of Al-9Si alloy during the static current test was almost as double as higher than aluminum 1050 through anodization. By adding hydrofluoric acid in the nitric acid electrolyte, the silicon compound on the surface was removed, and the optimum amount of added hydrofluoric acid could be derived. It was also observed that the size of silicon compound formed on the surface could be refined by heat treatment at $500^{\circ}C$ and followed water quenching.

• Journal of Information Display
• /
• v.8 no.2
• /
• pp.10-14
• /
• 2007

A blazed $GxL^{TM}$ device is described as having high optical efficiency (> 70% for RGB lasers), and high contrast ratio (> 10,000:1), and that is highly reliable when used in a large-area laser projection system. It has a robust design and precise stress control technology to maintain a uniform shape (bow and tilt) of more than 6,000 ribbons, a $0.25-{\mu}m$ CMOS compatible fabrication processing and planarization techniques to reduce fluctuation of the ribbons, and a reliable Al-Cu reflective film that provided protection against a high-power laser. No degradation in characteristics of the GxL device is observed after operating a 5,000- lumen projector for 2,000 hours and conducting 2,000 temperature cycling tests at $-20^{\circ}C$ and $+80^{\circ}C$. At the 2005 World Exposition in Aichi, Japan the world's largest laser projection screen with a size of 2005 inches (10 m ${\times}$ 50 m) and 6 million pixels (1,080 ${\times}$ 5,760) was demonstrated.