• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.217-230
• /
• 2012

This paper propose interacting test programming methods between test equipment and hardware unit to verify function and performance of the hardware unit under test. Proposed test program can minimizes the risk of failures when the unit is mounted on the aircraft by testing and verifying the unit under the worst stress condition. Also, Object oriented design using UML make it easy to apply in other equipments. Test program consists of architecture package and hardware package. Architecture package is in a role for system management, log analysis, message receiving and message analysis. Messages that are used by system management define messages for testing and defined messages is sent and received to test equipment through Ethernet. Hardware package is in a role for hardware management that is needed to be tested and is related to a system. Hardware to be tested is divided into internal test and transmission test. Internal test inspects hardware itself and reports the test results to the test equipment. Transmission test inspects communication device by sending or receiving data. All kinds of test is done in the worst condition of the test unit executing in parallel. Each device is tested at least 482 times and at most 15,003 times about one hour. Test program is utilized in hardware reliability test like as environmental test or EMI test.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.1
• /
• pp.1-14
• /
• 2013

The world largest land reclamation project in the name of Saemangeum(Ariul) from 1991 to the present has been implementing in a part of the west coast of Korea. In the Saemangeum reclamation project, the large-scale project cost is used for the landfill reclamation. A number of landfill reclamation methods have been studied in order to reduce the large-scale cost of the Saemangeum project under construction. There are many studies related to the on-site real-time monitoring with mobile systems for operating a wide range of landfill. In order to apply the work method for efficient cost-savings in the landfill operations to the Samangeum project, this paper develops a mobile management system that is composed of a mobile interface module, a data server module for data transmission and storage, and an analysis server module to analyze the input data and derive the results. The mobile system is designed by analysing user's and system requirements, functional interactions, and data flow using unified modeling language(UML). The user interface is developed for the on-site real-time monitoring through the status and related attributes of land reclamation by using the digital maps of the Samangeum coverage via mobile devices. Finally, a mobile management system would be developed that can provide a 3D GIS service based on the Dry Internal Project Site Digging Reclamation Method(DIPSDRM).

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.75-84
• /
• 2000

GIS has been building for various application fields with the aids of NGIS project, especially numerous municipal governments are building a UIS in the level of local governments' informatization. Although there are some difference between municipal governments' business, still many things are in common. So far, individual municipal governments have developed a UIS for their own use, which lead to duplicated development of the UIS. The component technology has been introduced to remove such duplicated efforts and it enabled maximizing the reusablilty of the UIS already developed. This paper proposes a component design for network analysis of the drinking water to calculate the amount of flow and the head loss. This component design provides the initial water amount to estimate the amount of the network flow and the head loss, thereby supports the decision making such as installation or extension of the pipe network. The process of the component design accompanies the business reengineering to support the standardized business work flow. Also, the design of the network analysis component uses the algorithms induced with UML specification. Based on the component design, the component development has been progressing and the network analysis system would be followed. In the near future, another component to integrate the network analysis and the business related to the drinking water needs to be developed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2000.06a
• /
• pp.181-186
• /
• 2000

국가지리정보체계사업을 시작으로 여러 응용분야에서 지리정보시스템을 구축하고 있으며, 특히 지자체에서는 도시정보화 차원에서 UIS(Urban Information System;도시정보시스템)를 구축하고 있다. 지자체의 업무들은 지자체의 상황에 따라 조금씩 차이를 보이지만 업무 단위로 따져 볼 때 공통적으로 수행되는 업무들이 많으며, 지리정보 관련 업무 또한 예외가 아니다. 지금까지 각 지자체의 도시정보시스템은 공통업무에 대하여 중복개발이 불가피 하였으며, 재사용성을 기대하기 어려웠다. 이런 비효율을 극복하는 방안으로 컴포넌트 기술이 대두되었으며, 컴포넌트 기술을 이용하여 업무변화에 유연하고 재활용을 극대화할 수 있는 업무 컴포넌트 개발이 필요한 시점이다. 본 논문은 지자체의 지리정보 관련 업무의 하나인 하수도 업무 중 하수배출용량 산정을 위한 하수도 관망해석 컴포넌트 설계를 제시하였다. 하수도 관망해석 컴포넌트는 하수배출용량을 산정하고, 하수 배출용량을 토대로 통수능이 부족한 하수관거를 추출하며, 통수능 부족 관거에 대하여 적정한 교체 관경 결정을 지원할 수 있도록 설계하였다 컴포넌트 설계과정은 표준업무를 지원할 수 있도록 업무분석을 수행하였으며, 이의 결과물로 하수도 관망해석 알고리즘을 도출하였으며, 알고리즘을 기반으로 하수도 관망해석 업무를 수행하는 하수도 관망해석 컴포넌트를 설계하고 설계 내용을 UML(Unified Modeling Language)로써 명세화 하였다. 현재 설계에 따라 하수도 관망해석 컴포넌트가 개발되고 있으며, 개발된 컴포넌트를 이용한 하수도 관망해석 시스템을 구축할 예정이다. 추후에는 하수도 관망해석 컴포넌트와 하수도 업무 컴포넌트와의 통합부분에 대한 연구가 진행되어야 할 것이다.7.0로 하고 표준(標準) EDTA 용액(溶液)을 소량(少量)넣고 8N-KOH로 pH $12{\sim}13$으로 하고 N-N 희석분말(稀釋粉末)을 지시약(指示藥) 으로써 표준(標準) EDTA 용액(溶液)으로 적정(滴定)하여 Ca 치(値)를 얻었다. Ca와 Mg의 합계결정치(合計決定値)와 Ca 적정치(滴定値) 차(差)로 Mg 치(値)를 얻었다. 음(陰) ion 구분(區分)으로부터 상법(常法)에 의하여 $MgNH_4PO_4$의 침전(沈澱)을 만들어서 HCl에 녹키고 일정량(一定量)의 표준(標準) EDTA 용액(溶液)을 넣어 pH 7.0로 한다음 완충액(緩衝液)으로 pH 10으로 하고 BT 지시약(指示藥)을 써서 표준(標準) Mg $SO_4$용액(溶液)으로 적정(滴定)하여 P 치(値)를 얻었다. 본법(本法)으로 Na-phytate를 분석(分析)한 결과(結果) Na-phytate의 분자식(分子式)을 $C_6H_6O_{24}P_6Mg_4CaNa_2{\cdot}5H_2O$라고 하였을 때의 이론치(理論値)에 비(比)하여 P가 98.9% Cark 97.1%, Mg가 99.1%이고 통계처리(統計處理)한 결과분석치(結果分析値)와 이론치(理論値)는 잘 일치(一致)된다. 그러나 종래법(從來法)에 의(依)한 분석치(分析値)는 이론치(理論値)에 비(比)하여 P가 92.40%, Cark 86.80%, Mg가 93.80%로서 이론치(理論値)와 일치(一致)하지 않는다. 3) Na-phytate를 전분(澱粉)과 일정(一定)한 비(比)로 혼합(混合)하고 본법(本法)으로 P,Ca 및 Mc를 정량(定量)한 결과(結果) 이들의 회수율(回收率)은 거의 100%이었다. 4) 본분석법

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.75-80
• /
• 2002

In these days of severe struggle for existence, the world has changed a great deal to global and digital oriented period. The enterprises try to introduce new management and production system to adapt such a change. But, if the only new technologies are applied to an enterprise without definite analysis about manufacturing, failure fellows as a logical consequence. Hence, enterprise must analyze manufacturing system definitely and needs new methodologies to mitigate risk. This study suggests that the new approach, which is systems approach for process improvement, is organized to systems analysis, systems diagnosis, and systems verification. Systems analysis analyzes manufacturing systems with object-oriented methodology-UML(Unified Modeling language) from a point of product, process, and resource view. Systems diagnosis identifies the constraints to optimize the system through scientific management or TOC(Theory of constraints). Systems verification shows the solution with virtual manufacturing technique applied to the core problem which emerged from systems diagnosis. This research shows the artifacts to improve the productivity with the above methodology applied to forming shop. UML provides the definite tool for analysis and re-usability to adapt itself to environment easily. The logical tree of TOC represents logical tool to optimize the forming shop. Discrete event simulator-QUEST suggests the tool for making a decision to verify the optimized forming shop.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.34-45
• /
• 2004

Existing Semangeum's water balance analysis simplifies whole basin to single basin and achieved volume of effluence that produce by Kajiyama way to foundation. But Semangeum is complicated and various rice-wine strainer supply system. And there is difficulty to apply as elastic when water balance element is changed at free point. Divided to unit possession station for suitable water balance analysis model application to Semangeum in this study. And developed basin water balance model of GIS base that can do details analysis is bite about development and transfer of an appropriation in the budget of basin water resources. Achieved study including abstraction and concept design that use UML (unified modeling language) diagram for details analysis, stream network composition for rice-wine strainer supply system application, preprocessing of GIS base and postprocessing module development, model revision and verification etc. Support of this water balance analysis model is available to establish efficient water resources administration plan through outward flow process analysis of water resources. And support is considered to be possible in more convenient and, reasonable water resources administration way establishment by minimizing manual processing in systematic water resources government official to user and support diversified analysis system.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.25-34
• /
• 2011

In this paper we present an integrated design methodology for relational database based on object-oriented analysis and design. The integrated design methodology is based on business profile and has six phases. In the first phase, business use cases are identified and described by macroactivity diagrams and then the macroactivity diagrams are transformed to detailed business activity diagrams by using objects, object flows and business worker's responsibilities. In the third phase, the detailed business activity diagrams are transformed to business class diagrams that describe the static structure of the entire business system based on detailed business activity diagrams. In the four phase, the business class diagrams are transformed to class diagrams that represent the initial conceptual model of the target relational database. In the five phase, we add additional transformations on the class diagrams with generalization and specialization of associations, roles, activities, additional classes and redundant associations. Eventually, the final class diagrams are transformed to relational database schema. The methodology presented in this paper by applying that proposal for organic connection between object-oriented analysis and design methodology and relational database design methodology. And it will be able to deal with integration management. By the integrated design methodology, we can make more easily software systems based on relational database. In the case study, proposal integrated design methodology applied for a visa issuing system.