• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.628-633
• /
• 2018

The accuracy of GNSS depends on several factors from the equipment used in data processing because GNSS positioning can be used differently depending on the accuracy required. In the case of the control point surveying requiring high accuracy, GNSS surveying is performed using the relative positioning method, and the observation time and data processing s/w are used differently depending on the class of the control points. On the other hand, the accuracy of academic software depends on the skill of the user, so it may be better to use commercial software in the case of a short baseline. In this study, the results of GNSS survey data were compared using scientific software and commercial software. The results showed that the horizontal position showed a difference of less than 2 cm and the height showed a difference of less than 5 cm. These differences were found to be in the error ranges specified in the unified control point survey regulations. Based on the above results, the commercial s/w can be used for GNSS data processing at the midterm baseline rather than the long baseline.

• Advances in Energy Research
• /
• v.4 no.4
• /
• pp.255-274
• /
• 2016

This paper presents a novel symbiotic organisms search (SOS) algorithm to optimize both real power loss (RPL) and voltage stability limit (VSL) of a transmission network by controlling the variables such as unified power flow controller (UPFC) location, UPFC series injected voltage magnitude and phase angle and transformer taps simultaneously. Mathematically, this issue can be formulated as nonlinear equality and inequality constrained multi objective, multi variable optimization problem with a fitness function integrating both RPL and VSL. The symbiotic organisms search (SOS) algorithm is a nature inspired optimization method based on the biological interactions between the organisms in ecosystem. The advantage of SOS algorithm is that it requires a few control parameters compared to other meta-heuristic algorithms. The proposed SOS algorithm is applied for solving optimum control variables for both single objective and multi-objective optimization problems and tested on New England 39 bus test system. In the single objective optimization problem only RPL minimization is considered. The simulation results of the proposed algorithm have been compared with the results of the algorithms like interior point successive linear programming (IPSLP) and bacteria foraging algorithm (BFA) reported in the literature. The comparison results confirm the efficacy and superiority of the proposed method in optimizing both single and multi objective problems.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.135-137
• /
• 2009

Mathematical models for describing the Human Immunodeficiency Virus(HIV) infection can be devised to better understand how the HIV causes Acquired Immune Deficiency Syndrome(AIDS). The HIV models can then be used to find clues to curing AIDS from a control theoretical point of view. Some models take Cytotoxic T Lymphocytes(CTL) response to HIV infection into account, and others consider mutants against the drugs. However, to the best of our knowledge, there has been no model developed, which describes CTL response and mutant HIV together. Hence we propose a unified model to consider both of these. On the basis of the resulting model, we also present a Model Predictive Control(MPC) scheme to find an optimal treatment strategy. The optimization is performed under the assumption that the Structured Treatment Interruption(STI) policy is employed.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.4
• /
• pp.242-249
• /
• 2001

In this paper, the open-loop state response of the two-time-scale systems by unified approach using the $\delta$-operator is presented with an example of the aircraft longitudinal dynamics. First, the $\delta$-operator system unifies both the continuous system and the discrete system simultaneously, and the $\delta$-operator approach improves the finite word-length characteristics. This saves more computing time than that of the discrete system. Second, the singular perturbation method by block diagonalization reduces the sizes and orders of the systems. This also reduces the floating-point operations (flops). The advantage of those two approaches is shown by comparing our results with the earlier ones in the illustrative example of the longitudinal motion of F-8 aircraft.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.83-92
• /
• 2003

The previous control point surveying, being standardized by trigonometric point which hasn't been unified in the whole country and producing put into operation through complex calculation process, has many problems about accurate results and economic side. Because most of trigonometric points that standardize a present surveying are in situation in top of the mountain, there are many difficulties in solving sight problems. Since trigonometric points are far away from one another, Differences are created because of limitation of point distance, observatory network construction and distribution of error. In the information age, the study about acquiring three dimension surveying information that uses GPS has been processed as fast as acquiring topography information is getting important gradually. For utilizing GPS in surveying work, deciding transformation 7-Parameters that changes data about location information which is received by GPS receiver is important. In this study, it is decided transformation 7-Parameters that can be used in ka-pyoung area by using GPS surveying production that had put into operation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.3-13
• /
• 2008

The coordinate of cadastral control points located over the area of different surveying origins is computed in a single surveying origin by trilateration adjustment of GPS baseline measurements. In every different surveying origins, well-matched control points are selected and mutually coinciding coordinates are computed by free network adjustment. Then, the coordinate of the other control points over the area is computed by joining these points to the adjusted points. In practice, by using 18 points of Gari, 17 points of Gyeyang, and 33 points of Central origin in Incheon, the coordinates of total 68 points in every surveying origin are computed. Between the points of different surveying origins, it is found that there are quantitative differences in azimuth and scale factors and the approximate point coordinate of other surveying origins is calculated by correcting the scale and azimuth.

• Strategy21
• /
• s.38
• /
• pp.47-82
• /
• 2015

To control the sphere, it required a strategic understanding to sphere and a power for overcome to it. In the early 20th century, the Pacific-War is a confrontation between the U.S. and the Japan for holding supremacy a pacific ocean sphere, building on maritime geopolitical perception. The Pacific ocean is a large of sphere, so if a country pursues a Pacific region supremacy, it needs a strategic perception and capability to control the sphere. After the U.S. has unified the continental, it has formed geopolitical perception in the Pacific ocean and by the way to control the Pacific ocean selected a naval power. The U.S. must have overcome a Pacific sphere for getting through to the Pacific region, this concept has developed the War Plan Orange(war plan relations with the Japan). Meanwhile, at this point of time, the Japan has recognized to a geopolitical point of view about security environment in the Pacific ocean. like as the U.S. has the War Plan Orange in mind for building on geopolitical perception of the Pacific ocean, the Japan also has learned geopolitical perception from the U.S. Because of this, the Japan has established the Interception-Attrition strategy(war plan relations with the U.S.). If we don't have overcome a sphere of the Pacific ocean, we don't hold hegemony of the Asia-Pacific region. So the analysis of perspective maritime geopolitics about the Pacific war is a meaningful study.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.403-410
• /
• 2009

This paper discusses an application method of critical strains concept for tunnels' safety by using the values of measured displacements which are obtained in the field. The aim of this paper is to: (1) study on the engineering meanings of critical strains concept by reviewing the previous researches and application examples with measured displacement values; (2) study on the engineering reasonability of critical strains concept with the view point of a tunnel engineering and a geotechnical engineering; (3) study on the features of ground deformation due to tunneling and reciprocal relation between total displacement and measured displacement; (4) evaluate a tunnel safety by using domestic measurements collected in the field; and (5) re-evaluate the control criteria which were previously used in the field, with the view point of critical strains concept. Consequently, it was confirmed that critical strains in the ground has a reasonability and a possibility of unified or common concept with the view point of a tunnel engineering.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.489-496
• /
• 2001

This paper proposes an unified definition of powers for various circuit conditions such as balanced/unbalanced, sinusoidal/non-sinusoidal, and linear/nonlinear, for single-phase systems and three-phase systems. Conventional reactive power is more classified into an interactive power and a scattering power. These powers are defined both in the time domain and the frequency domain consistently, and agree well with the conservation law. Several important power quality factors are defined to measure and evaluate the power quality for the various circuits in the single-phase and three-phase systems. Simulation results show the power quality factors can evaluate and classify the various circuit conditions clearly.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.2
• /
• pp.13-24
• /
• 2004

Human error has brought about accidents more than 50% in system of a large size and complicated expecially in nuclear power plants(NPPs). The technology of Man Machine Interface(MMI) has been changed to the digitalized controls employing computer-based technology. According to this trend. the human factors guidelines are becoming main issue for reliable supports to digitalized information displays. However. the existing human factors guidelines is not enough for advanced information display on NPPs. The purpose of this research is to develop the reliable design and evaluation guidelines for advanced information display in main control room (MCR) of NPPs. In this study. the various general human factors guidelines concerning information display on CRT are integrated on data base management system. unified based on the integration rules. and applied in computer based procedures. The use of the integrated guidelines are expected to evaluate the existing information display on MCR in NPPs from the human factors point of view.