• 한국터널지하공간학회 논문집
• /
• 제11권4호
• /
• pp.327-351
• /
• 2009

본 논문은 대심도 또는 과지압 암반에서 2차지압으로 인해 발생되는 취성파괴와 관련한 실내실험을 수행하고, 취성파괴 현상을 잘 예측할 수 있는 CWFS(Cohesion Weakening Frictional Strengthening)모델을 이용한 수치해석을 수행하였다. 암석의 거동을 분석하고 손상의 함수인 암석강도정수를 도출하기 위하여 일축압축강도실험과 손상제어실힘을 수행하였다. 일축압축강도실험결과 균열개시응력은 화강암, 편마암 구분 없이 일축압축강도의 41~42% 정도로 분석되었으며, 반면 균열손상응력은 화강암은 일축압축강도의 75%, 편마암은 일축압축강도의 97%의 값으로 분석되었다. 손상제어실험결과 균열손상응력과 최대하중은 Peak하중 이후 감소하는 것으로 나타났다. 또한 점착력은 감소하고 마찰각은 증가하는 양상을 보였다. Peak하중 이전에는 탄성계수가 증가하고 Peak하중 이후에는 감소하였다. 그리고 포아송비는 손상이 진행될수록 증가하는 양상을 보였다. 일축압축강도실험과 손상제어실험의 균열개시응력과 균열손상응력의 비교분석결과 손상제어실험의 균열개시응력은 일축압축강도실험에서 얻어진 균열개시응력의 범위에서 변화하는 양상을 보였고, 균열손상응력은 일정 손상수준에서 일축압축강도실험에서 얻어진 값보다 작은 값으로 나타났다. 실내실험결과로부터 CWFS모델의 입력 파라미터를 도출하여 수치해석에 적용하여 취성파괴 발생 한계토피고를 구했다. CWFS모델을 이용한 수치해석으로부터 예측된 한계토피고와 손상지수로부터 예측된 한계토피고를 비교한 결과, 취성파괴 발생 한계토피고를 정확히 예측하지 못하는 결과를 나타냈다. 따라서 원형터널에만 적용기한 손상지수를 사용하는 것은 문제가 있다고 판단된다. 이를 개선하기 위해 터널의 형상을 고려한 형상계수를 손상지수에 적용하였다. 터널의 형상을 고려한 수정된 손상지수로부터 예측된 한계토피고는 수치해석결과와 거의 동일한 결과를 보였다.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.323-331
• /
• 2019

The presence of defects in nature changes the physical parameters of the rock. In this paper, by studying the rock-like specimens with conjugated fractures, the horizontal angle and length are changed, and the physical parameters and failure modes of the specimens under uniaxial compression test are analyzed and compared with the results of simulation analysis. The experimental results show that the peak strength and failure mode of the rock-like specimens are closely related to the horizontal angle. When the horizontal angle is $45^{\circ}$, the maximum value is reached and the tensile failure mode is obtained. The fracture length affects the germination and propagation path of the cracks. It is of great significance to study the failure modes and mechanical properties of conjugated fracture rock-like specimens to guide the support of fractured rock on site.

• 복합신소재구조학회 논문집
• /
• 제6권4호
• /
• pp.8-15
• /
• 2015

The demand for environmental consideration is on the increase in civil engineering. This study focuses on the development of technology to reduce the use of carbonate cement and improve its performance by using a silicate mineral and hardening agents, and presents the test results for the demonstrative evaluation of the properties of the raw material. Highly active feldspar was used as a binder to augment the bonding of the carbonate cement, and their change in strength was observed after test piece construction with the addition of soluble hardening agent. The uniaxial compression strength of the test piece of the general Portland cement with the addition of 0.5% soluble hardening agent, showed an increase by 33% and that of the test piece of cement with the addition of 70% substituted with feldspar increased by 28%. The strength of viscous soil; classified as soft ground, showed an increase of a maximum of 1.7 times when it was mixed with cement and solidifier depending on the curing period. These tests confirmed that a soluble solidifier is effective for improving the strength of a cement binder and that the highly active feldspar can be used as a binder.

• 한국재료학회지
• /
• 제30권4호
• /
• pp.197-203
• /
• 2020

Abdominal organs are the most vulnerable body parts under vehicle trauma, and there is high mortality from acute injuries in accidents. There are various ways to reduce this high mortality; one method is Resuscitative Endovascular Balloon Occlusion of the Aorta, which has recently become very popular as a minimally invasive alternative in the emergent management of patients with non-compressible hemorrhages below the diaphragm. However, high safety factor for patients is applied in actual clinical practice because there is no exact standard for the operating time. Therefore, in this study, the effects of the mechanical behavior of organ tissues for the duodenum, kidney, and liver on the operating time of Resuscitative Endovascular Balloon Occlusion of the Aorta is investigated in order to obtain data needed to establish standards of operating time. In characteristic analysis of organ tissues, uniaxial tensile test and compression test are conducted according to the operating time.

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.5-15
• /
• 2011

최근 연안지역에서의 대형건설공사 증가로 인해 대규모의 연약지반처리 공사가 많이 이루어지고 있다. 이로 인해, 흙에 시멘트나 석회를 첨가하여 안정성과 내구성을 증대시키는 고화안정처리공법이 연약지반 현장의 표층처리에 빈번히 사용되고 있다. 고소성, 고압축성의 초연약 점성토를 대상으로 한 고화처리 연구는 그 동안 많이 이루어져 왔으나 상대적으로 낮은 소성성과 압축성을 가진 실트질 점성토를 대상으로 한 고화처리 연구는 찾아보기 힘들다. 따라서 본 연구에서는 송도 지역의 저소성 실트질 점성토를 배합 함수비, 개량재 배합비, 양생 기간을 변화시키며 시멘트와 생석회로 고화처리하고, 일축압축 시험 및 평판재하시험을 통하여 강도 특성을 파악하였다. 일축 압축 시험과 평판 재하 시험으로부터 상당히 일치하는 강도 특성 결과를 얻었으며, 이를 바탕으로 개량토를 매립지 표토층으로 이용하였을 경우 건설 장비의 주행성을 평가하였다. 이상의 결과로부터 송도 지역 점성토를 고화 처리하는 최적의 조건을 얻을 수 있었다.

• 터널과지하공간
• /
• 제25권2호
• /
• pp.144-154
• /
• 2015

암석시료에 응력이 가해질 경우 역학적 에너지가 대상 물체에 누적되고, 대상 암석에 한계응력 이상이 가해질 경우 시료의 파괴가 발생한다. 이 때 시료 내부에 저장되어 있던 역학적 에너지는 물리적 변형뿐만 아니라 빛, 열, 소리 등 다양한 형태의 에너지로 발산된다. 본 연구에서는 $-10^{\circ}C$ 저온 환경에서 섬록암, 현무암, 응회암을 대상으로 일축압축강도 시험과 점하중강도 시험을 수행하고, 이때 발생하는 온도 변화를 열적외선카메라를 이용해 측정하고 정량적으로 분석하였다. 파괴 직전 파괴면에 응력이 집중되어 온도가 상승하였고, 파괴 순간 축적된 에너지가 열에너지의 형태로 방출되며 파괴면의 온도가 급격히 상승하는 것이 감지되었다. 강도가 높고 신선한 섬록암과 현무암 시료의 온도 상승폭이 상대적으로 강도가 낮고 풍화된 암석인 응회암 시료의 온도 상승폭에 비해 더 크게 나타났다. 본 연구결과는 저온지역에 위치한 암반사면, 터널, 광산 내부의 응력 집중지점을 감지해 향후 발생 가능한 재해를 예방하는데 적용될 수 있으며, 지진예측을 위한 위성영상 분석에도 적용될 것으로 기대된다.

• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.199-213
• /
• 2022

Experimental and discrete element approaches were used to examine the effects of F shape non-persistent joints on the failure behaviour of concrete under uniaxial compressive test. concrete specimens with dimensions of 200 cm×200 cm×50 cm were provided. Within the specimen, F shape non-persistent joint consisting three joints were provided. The large joint length was 6 cm, and the length of two small joints were 2 cm. Vertical distance between two small joints change from 1.5 cm to 4.5 cm with increment of 1.5 cm. In constant joint lengths, the angle of large joint change from 0° to 90° with increments of 30°. Totally 12 different models were tested under compression test. The axial load rate on the model was 0.05 mm/min. Concurrent with experimental tests, numerical simulation (Particle flow code in two dimension) were performed on the models containing F shape non-persistent joint. Distance between small joints and joint angles were similar to experimental one. the results indicated that the failure process was mostly governed by both of the Distance between small joints and joint angles. The axial loading rate on the model was 0.05 mm/min. The compressive strengths of the samples were related to the fracture pattern and failure mechanism of the discontinuities. Furthermore, it was shown that the compressive behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the joint angle. In the first, there were only a few acoustic emission (AE) hits in the initial stage of loading, and then AE hits rapidly grow before the applied stress reached its peak. Furthermore, a large number of AE hits accompanied every stress drop. Finally, the failure pattern and failure strength are similar in both approaches i.e., the experimental testing and the numerical simulation approaches.

• 소성∙가공
• /
• 제29권4호
• /
• pp.179-187
• /
• 2020

Existing composite forming processes such as the autoclave, prepreg compression forming (PCF), RTM, etc. require high production costs because of their long processing time. On the other hand, microwave heating process (MHP) can reduce the production costs since both mold and composite material can be heated directly. The aim of this study is to manufacture a mold consisting of polytetrafluoroethylene (PTFE), quartz glass, stainless steel clamps, and polyether ether ketone (PEEK) bolts for fabricating FML based on self-reinforced polypropylene (SRPP) using the MHP. First, the flame test was carried out prior to the MHP to check the temperature on the mold and whether the spark occurred at the mold and the edge of the FML. Second, the uniaxial tensile test was then conducted to obtain the mechanical properties of the FML manufactured by the MHP. The mechanical properties were compared with those of the FML fabricated by the PCF. As a result, the MHP using the PTFE mold can manufacture the FML more rapidly than the PCF, and obtain acceptable mechanical properties.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.412-419
• /
• 2009

Large quantity of extra soils discharged from excavation site in Songdo area can be treated by hardening agents and utilized in surface stabilized layer overlying thick reclaimed soft soil deposit. Though surface layer stabilization method using cement or lime for very soft soils has been studied in recent years, but studies on moderately soft clayey silt has not been tried. The purpose of this research is to investigate optimum mixing condition for stabilizing Songdo marine soil with low plasiticity. The optimum mixing conditions of hardening agents with Songdo soil such as kind of agents, mixing ratio, initial water content and curing time are investigated by uniaxial compression test and laboratory vane test. The results indicate that strength increases with high mixing ratio and long curing time, while decreases drastically under certain water content before mixing. Finally, optimum mixing condition considering economic efficiency and workability with test results was proposed.

• 소성∙가공
• /
• 제21권4호
• /
• pp.228-233
• /
• 2012

In this study, powder compaction of AZO (alumina doped zinc oxide) powder was performed with a MTS 810 test system using a cylindrical die having a diameter of 10mm. Pressure-density curves were measured based on the load cell and displacement of the punch. The AZO powder compacts with various densities were formed to investigate the mechanical properties such as fracture stress of the AZO powder as a function of the compact density. Two types of compression tests were conducted in order to estimate the fracture stress using different loading paths: a diameteral compression test and a uniaxial compression test. The pressure-density curves of the AZO powder were obtained and the fracture stress of the compacted powders with various densities was estimated. The results show that the compact pressure dramatically increases as the density increases. Based on the experimental results, calibration of the modified Drucker-Prager/Cap model of the AZO powder for use in FE simulations was developed.