• 소성∙가공
• /
• 제16권6호
• /
• pp.426-431
• /
• 2007

Hydroformability and fracture criteria of FE analysis based on ductile fracture were investigated in warm hydroforming of A16061 tube. To evaluate the hydroformability, uni-axial tensile test and bulge test were performed at room temperature and $200^{\circ}C$. The measured flow stresses were used as input parameters for FE analysis. The damage values were calculated by FE analysis based on ductile fracture criteria at maximum radius of free bulged tubes. Damage values were compared of hexagonal shaped hydroformed parts. As a result, the formability by critical damage value for extruded tube is lower than that of full annealed tube up to 0.5.

• 소성∙가공
• /
• 제18권1호
• /
• pp.73-79
• /
• 2009

In order to investigate the formability of friction stir welded(FSW) tailor welded blanks(TWB) with respect to the base material's directional combination, aluminum alloy AA6111-T4 sheets were welded with three different conjoining types: RD-RD, TD-RD and TD-TD. Here, RD and TD represent rolling and transverse directions, respectively. For experimental formability study, three tests with gradual complexity were performed: the simple tension test with various weld line directions for uni-axial elongation, the hemisphere dome stretching test for biaxial stretching and the cylindrical cup deep drawing test. As a result, all three forming tests showed that RD-RD type samples exhibited the best formability, while TD-TD type sheets showed the least formability performance.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.5-16
• /
• 2004

본 연구에서는 토목섬유로 보강된 다짐토의 보강 메카니즘이 제시되며, 이러한 보강 메카니즘은 다짐토의 체적팽창(부의 다일러탄시)을 토목섬유에 의해 구속 억제하는 과정에서 생성되는 효과로 간주된다. 먼저, 실내실험을 위한 구체적인 방법으로서, 토목섬유의 보강효과를 정량적으로 파악하기 위하여 사질토를 다짐하여 공시체를 만들어 그 주위에 토목섬유를 설치한 후 전체적으로 압축전단시험을 실시하였다. 실험에서 초기 다짐도는 각각의 종류에 대하여 다일러탄시의 특성이 다르기 때문에 각각의 공시체에 대하여 변화시켰다. 여기서 전단시험 도중에 다짐토의 다일러탄시 변형을 방지하기 위한 토목섬유에 작용하는 축방향 힘들(axial forces)이 조사되었다. 또한 다짐토의 탄소성 모델과 이러한 모델에 필요한 초기 입력치 값의 결정 방법들이 제시된다. 마지막으로, 탄소성 구성 모델에서 항복 이전의 탄성 영역의 거동을 모사하기 위하여 Hashiguch(1989)가 제안한 subloading surface의 개념을 도입하여, 유한요소(FEM) 해석을 통해 얻어진 결과들을 실내시험의 결과와 비교 분석하였다.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.40-48
• /
• 1997

There are many research results as individual uni-axial tension creep test of heat-resisting materials. However, there are very few about the study on the high temperature creep test for the Initial Strain Method, and especially any study on it about the friction welded joints of SUH3 to SUH35. One of the important concerns is a reliable method of evaluating static creep properties. No reliable method seems available at present to evaluate or predict static creep properties. So, the reliable method to evaluate and predict them by the ISM and AE techniques was made.

• 접착 및 계면
• /
• 제6권2호
• /
• pp.13-20
• /
• 2005

환경 친화적인 자연섬유 강화 고분자 복합재료의 계면 전단강도는 총체적인 기계적 물성을 조절하는데 매우 중요한 역할을 수행한다. Ramie와 Kenaf 섬유 강화 에폭시 복합재료의 계면 전단강도는 최종 물성을 위한 최적 조건을 찾아내기 위해 미세역학시험법과 비파괴 음향방출시험을 이용하여 평가했다. Ramie와 Kenaf 섬유의 동적 접촉각을 측정했고, 계면 접착에서 젖음성과 상호 관련시켜서 해석하였다. Ramie와 Kenaf 섬유의 기계적 물성은 단섬유 인장시험을 통해 조사했고, 통계학적으로 uni-와 bimodal Weibull 분포를 통해서 분석하였다. Ramie와 Kenaf 섬유에 대한 실제 신장율의 clamping 효과의 영향도 평가할 수 있었다. 두 가지의 다른 미세파괴 형상은 섬유다발과 단섬유 복합재료로부터 오는 축방향의 debonding과 섬유상의 fracture는 인장과 압축하중하에서 관찰할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.254-257
• /
• 2007

In this study, hydroformability and mechanical properties of pre- and post- heat treated Al6061 tubes at different extrusion type were investigated. For the investigation, as-extruded, full annealed and T6-treated Al 6061 tubes at different extrusion type were prepared. To evaluate the hydroformability, uni-axial tensile test and free bulge test were performed at room temperature and $200^{\circ}C$. Also mechanical properties of hydroformed part at various pre- and post-heat treatments were estimated by tensile test. And the tensile test specimens were obtained from hexagonal prototype hydroformed tube at $200^{\circ}C$. As for the heat treatment, hydroformability of full annealed tube is 25% higher than that of extruded tube. The tensile strength and elongation were more than 330MPa and 12%, respectively, when hydroformed part was post-T6 treated after hydroforming of pre- full annealed tube. However, hydroformed part using T6 pre treated tube represents high strength and low elongation, 8%. Therefore, the T6 treatment after hydroforming for as-extruded tube is cost-effective. Hydroformability of Al6061 tube showed similar value for both extrusion types. But flow stress of seam tube showed $20{\sim}50MPa$ lower value.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.132-135
• /
• 2007

In this study, hydroformability and mechanical properties of pre- and post- heat treated Al6061 tubes at different extrusion type were investigated. For the investigation, as-extruded, full annealed and T6-treated Al6061 tubes at different extrusion type were prepared. To evaluate the hydroformability, uni-axial tensile test and free bulge test were performed at room temperature and $250^{\circ}C$. Also mechanical properties of hydroformed part at various pre- and post-heat treatments were estimated by tensile test. And the tensile test specimens were obtained from hexagonal prototype hydroformed tube at $250^{\circ}C$. As for the heat treatment, hydroformability of full annealed tube is 25% higher than that of extruded tube. The tensile strength and elongation were more than 330MPa and 12%, respectively, when hydroformed part was post-T6 treated after hydroforming of pre- full annealed tube. However, hydroformed part using T6 pre treated tube represents high strength and low elongation, 8%. Therefore, the T6 treatment after hydroforming for as-extruded tube is cost-effective. Hydroformability of Al6061 tube showed similar value for both extrusion types. But flow stress of seam tube showed $20{\sim}50MPa$ lower value.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.201-209
• /
• 2012

그로멧은 자동차의 고무부품들 중의 하나로 에틸렌 프로필렌 고무로 구성되어 있으며, 고무의 비선형 초탄성 성질은 고무제품의 거동을 예측하는데 중요하다. 본 논문에서는, 일축인장시험과 이축인장시험을 통하여 안정된 응력-변형률 관계를 구하고 그로멧에 대한 유한요소해석을 수행하였고, 수명예측을 위한 노화시험을 소개하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.318-321
• /
• 2006

In this strudy, the free-bulge test and FE analysis have been used to define the fracture criteria based on the cockroft and Latham's criterion in warm hydroforming of Al 6061 tube. Full annealing and T6 treatment for heat treatment of Al 6061 tube ware used in this study. As-extruded, full annealed and T6-treated Al 6061 seamless tubes were prepared. To evaluate the hydroformability, uni-axial tensile test and bulge test were performed between room temperature and $200^{\circ}C$. And measured flow stress was used to simulate the warm hydroforming. A commercial FEM code, DEFORM-$2D^{TM}$, was used to calculate the damage value. A forming limit based ductile fracture criteria has been proposed by the results of experimental and FE analysis. The calculated values for fracture criteria will be efficient to predict the forming limit in hydroforming for real complex shaped part.

• 열처리공학회지
• /
• 제20권4호
• /
• pp.181-186
• /
• 2007

Effect of heat treatment conditions on formability and property of warm hydroformed parts for Al 6061 extruded tubes was investigated in this study. For the investigation, as-extruded, fully annealed and T6-treated Al 6061 seamless tubes were prepared. To evaluate the warm hydroformability, uni-axial tensile test and free bulge test were performed at various pre- and post-heat treatment conditions. And the tensile test specimens were obtained from hexagonal prototype hydroformed parts at $250^{\circ}C$. As a result, hydroformability of fully annealed tube is 25% higher than that of extruded tube. The tensile strength and strain of hydroformed part reach to 330 MPa and 12%, respectively, when the part was T6 treated after warm hydroforming. However, the hydroformability of T6 pre-treated tube is relatively low due to the decreased elongation, 8%.