• Title/Summary/Keyword: Unexpected values

Search Result 102, Processing Time 0.026 seconds

Multiple Regression Analysis to Determine the Reservoir Classification in the Empirical Area-Reduction Method (경험적 면적감소법을 위한 저수지 분류에 관한 연구)

  • 권오훈
    • Water for future
    • /
    • v.10 no.1
    • /
    • pp.95-100
    • /
    • 1977
  • The empirical area-reduction method by W.M. Borland and C.R. Miller and its revised procedure by W.T. Moody were made of fitting the area and storage curves to the Van't Hul distributions. It should be noted that the reservoir is classified into one of the four standard types on the basis of the topographical feature of the reservoir in application of the method. In other words, this method did not take into account several considerafble factors affecting the mode of sediment deposition, but only the shape of the reservoir as a governign factor. This is why the method occasionally creates ambiguity in classification and accordingly leads to unexpected mode of deposition. This paper describes a generating an formula to decide the standard classification of four types Van's Hul distributions, taking into consideration quantitatively sediment-loss percent and capacity-inflow ratio as well as the shape of the reservoirs by multiple regression analysis using the least square method to get a better fit to the design curves. The result is expressed as $Y=-1.95+55.8X_1+0.14X_2+0.12X_3$ in which the the values of Y locate the standard type I through type IV in the range from ten to forty with the interval of ten. The regression analysis was correlated well with the standard errors of estimate of around two except for the case of the type IV. This formula does not give big difference from the Borland's work in general sityation, but it demonstrates acceptable results, giving somewhat precise replys for the specific reservoirs. Its application to the Soyang Lake, one of the largest reservoirs in the country, defined clearly the type II, while the original method located it in the boundary of the type II and type III.

  • PDF

Intelligent Range Decision Method for Figure of Merit of Sonar Equation (소나 방정식 성능지수의 지능형 거리 판단기법)

  • Son, Hyun Seung;Park, Jin Bae;Joo, Young Hoon
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.23 no.4
    • /
    • pp.304-309
    • /
    • 2013
  • This paper proposes a intelligent approach on range decision of figure of merit. Unknown range of the underwater target and the non-fixed signal excess make the uncertainty for the tracking process. Using the input data of signal excess related to the range, we establish the rule of the fuzzy set and the original data acquired by sonar can be transformed to the fuzzified data set. To reduce the error arisen from the unexpected data, we use the new data transformed in fuzzy set. The piecewise relations of the min value, max one, and the mean one are calculated. The three values are used for the expected range of the underwater target. By analysing the fluctuation of the data, we can expect the target's position and the characteristics of the maneuvering. The examples are presented to show the performance and the effectiveness of the proposed method.

A Study on Shipborne Gravity Data Correction Using Kalman RTS Filter (칼만 RTS 필터를 이용한 선상 중력 자료 보정에 관한 연구)

  • Hwang, Jong-Sun;Han, Hyun-Chul
    • Economic and Environmental Geology
    • /
    • v.43 no.4
    • /
    • pp.343-348
    • /
    • 2010
  • Gravity anomalies observed in shipborne survey are usually distorted by bad weather conditions and unexpected vessel movement. These distorted data should be removed because they may mislead the data interpretation. However, it is not possible to perfectly remove all erroneous data. Cross-over point correction, which is generally used, only reduces the errors at cross-over points, and thus the data still contain error values. To resolve this drawback, Rauch-Tung-Striebel(RTS) filter was adopted to minimize all errors in the data and at cross-over points. After applying this method, the range of anomaly variation is reduced from 15 mGal to less than 2 mGal, and errors at the cross-over points are minimized from 4.21 mGal to 2.95 mGal. The results imply that RTS filter is very useful to reduce errors in the data and corss-over points.

The Influence of Sintering Atmosphere on the Reduction Behaviour of Refractory Bricks and the Basic Properties of $UO_{2}$ Pellet

  • Lee, Seung-Jae;Kim, Kyu-Tae;Chung, Bum-Jin
    • The Korean Journal of Ceramics
    • /
    • v.4 no.4
    • /
    • pp.279-285
    • /
    • 1998
  • The $UO_2$ pellets are usually sintered under hydrogen gas atmosphere. Hydrogen gas may cause unexpected early failure of the refractory bricks in the sintering furnace. In this work, nitrogen was mixed with hydrogen to investigate the effect of nitrogen gas on a failure machanism of the refractory bricks and on the microstructure of the $UO_2$ pellet. The hydrogen-nitrogen mixed gas experiments show that the larger nitrogen the mixed gas contains, the less the refractory materials are reduced by hydrogen. The weight loss measurements at $1400^{\circ}C$ for fire clay and chamotte refractories containing high content of $SiO_2$ indicate that the weight loss rate for the mixed gas is about half of that for the hydrogen gas. Based on the thermochemical analyses, it is proposed that the weight loss is caused by hydrogen-induced reduction of free $SiO_2$ and/or $SiO_2$ bonded to $Al_2O_3$ in the fire clay and chamotte refractories. However, the retardation of the hydrogen-induced $SiO_2$ reduction rate under the mixed gas atmosphere may be due to the reduction of the surface reaction rate between hydrogen gas and refractory materials in proportion to volume fraction of nitrogen gas in the mixed gas. On the other hand, the mixed gas experiments show that the test data for $UO_2$ pellet still meet the related specification values, even if there exists a slight difference in the pellet microstructural parameters between the cases of the mixed gas and the hydrogen gas.

  • PDF

Effect of Design variables of Rail Surface Measuring Device on Acoustic Roughness and Spectral Analysis (레일표면 측정장치의 설계변수가 음향조도 스펙트럼 분석에 미치는 영향)

  • Jeong, Wootae;Jeon, Seungwoo;Jeong, Dahae;Choi, Han Shin
    • Journal of the Korean Society for Railway
    • /
    • v.20 no.4
    • /
    • pp.440-447
    • /
    • 2017
  • Spectrum level for the acoustic roughness of wheels and rail surface should be periodically maintained under the limitation of ISO to reduce rolling noise of railway vehicles. Thus, in maintaining railway track, displacement sensor-based measuring devices are broadly used to measure the surface roughness and to perform spectral analysis. However, these measuring devices cause unexpected measuring errors since the displacement sensors are fixed at moving platforms and the main frame produces pitching motion during measurement. To increase the accuracy of the measured values, this paper has investigated the effects of design variables such as wheel base, additional wheels, and elastic deformation of wheels on the surface roughness and acoustic roughness spectrum.

Experimental Study and Performance Analysis of the Solid Rocket Motor with Pintle Nozzle (핀틀-노즐이 적용된 고체추진기관의 연소 시험 성능 분석)

  • Jin, Jungkun;Ha, Dong Sung;Oh, Seokjin
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.18 no.5
    • /
    • pp.19-28
    • /
    • 2014
  • Firing test of solid rocket motor with pintle-technology carried out and the measured pressure-time curve was compared with the values predicted by the internal ballistic and performance analysis. Without baffle, the measured combustion chamber pressure was similar with the predicted pressure at the beginning of combustion, but gradual increase in pressure, which was unexpected with the end-burning grain of which burning area is constant, was observed. A baffle was inserted to make uniform flow over the pintle. Unlike the thruster without baffle, the measured combustion chamber pressure was 1.4 times higher than the predicted value. Through the CFD simulation, 10% of total pressure loss of the flow was observed from combustion chamber to nozzle throat when the baffle was inserted. The measured pressure with baffle was predicted well by considering the total pressure loss in the internal ballistic modelling and performance analysis.

A Study on the Linhaiyin(林海音)'s Chengnanjiushi(城南舊事) (린하이인(林海音)의 『성남구사(城南舊事)』 연구)

  • Kim, Sujin
    • Cross-Cultural Studies
    • /
    • v.27
    • /
    • pp.167-195
    • /
    • 2012
  • A Chinese female writer Linhaiyin(林海音) and Chengnanjiushi(城南舊事), her representative work, have never been studied in Korea before although she and her literary works stand high and are well known in the history of the modern Chinese literature. Thus, in this paper, I analyze her and her novels included in Chengnanjiushi and study their literary value and meaning. To analyze and study them, I mainly consider novels Anhuiguan, Womenkanhaiqu, Lanyiniang, $L{\acute{\ddot{u}}}dagunr$, and Babadehuarluole included in Chengnanjiushi. Firstly, I look into her attitude and mode to observe children and women's life as a writer. Such attitude and mode succeeded to the spirit of the '5.4 literature'. Secondly, I evaluate Linhaiyin's 'Both sides complex' and its value in the history of literature. From this evaluation, the meaning of Linhaiyin's literature is highlighted. She was free from 'Both sides complex' occurred due to the circumstance of the times and played a role of a bridge so as not to break off literature of China and Taiwan. When her and her works are evaluated, this is one of the most important values. The characteristic of her writing mode is that she did not seek a compelling climax, a surprising reversal, or an exclusive plot or character in her works. In her works, plain description or unwitting conversation and story often imply deep meanings. Thus, at unexpected moment after reading her novels, readers truly listen to deep resonance for her attitude and mode to observe people's life. This is exactly her potential energy that makes readers sink into her literary world regardless of time and space.

Three dimensional dynamic soil interaction analysis in time domain through the soft computing

  • Han, Bin;Sun, J.B.;Heidarzadeh, Milad;Jam, M.M. Nemati;Benjeddou, O.
    • Steel and Composite Structures
    • /
    • v.41 no.5
    • /
    • pp.761-773
    • /
    • 2021
  • This study presents a 3D non-linear finite element (FE) assessment of dynamic soil-structure interaction (SSI). The numerical investigation has been performed on the time domain through a Finite Element (FE) system, while considering the nonlinear behavior of soil and the multi-directional nature of genuine seismic events. Later, the FE outcomes are analyzed to the recorded in-situ free-field and structural movements, emphasizing the numerical model's great result in duplicating the observed response. In this work, the soil response is simulated using an isotropic hardening elastic-plastic hysteretic model utilizing HSsmall. It is feasible to define the non-linear cycle response from small to large strain amplitudes through this model as well as for the shift in beginning stiffness with depth that happens during cyclic loading. One of the most difficult and unexpected tasks in resolving soil-structure interaction concerns is picking an appropriate ground motion predicted across an earthquake or assessing the geometrical abnormalities in the soil waves. Furthermore, an artificial neural network (ANN) has been utilized to properly forecast the non-linear behavior of soil and its multi-directional character, which demonstrated the accuracy of the ANN based on the RMSE and R2 values. The total result of this research demonstrates that complicated dynamic soil-structure interaction processes may be addressed directly by passing the significant simplifications of well-established substructure techniques.

Swarm Based Robust Object Tracking Algorithm Using Adaptive Parameter Control (적응적 파라미터 제어를 이용하는 스웜 기반의 강인한 객체 추적 알고리즘)

  • Bae, Changseok;Chung, Yuk Ying
    • The Journal of Korean Institute of Next Generation Computing
    • /
    • v.13 no.5
    • /
    • pp.39-50
    • /
    • 2017
  • Moving object tracking techniques can be considered as one of the most essential technique in the video understanding of which the importance is much more emphasized recently. However, irregularity of light condition in the video, variations in shape and size of object, camera motion, and occlusion make it difficult to tracking moving object in the video. Swarm based methods are developed to improve the performance of Kalman filter and particle filter which are known as the most representative conventional methods, but these methods also need to consider dynamic property of moving object. This paper proposes adaptive parameter control method which can dynamically change weight value among parameters in particle swarm optimization. The proposed method classifies each particle to 3 groups, and assigns different weight values to improve object tracking performance. Experimental results show that our scheme shows considerable improvement of performance in tracking objects which have nonlinear movements such as occlusion or unexpected movement.

Reliability and Validity of the Korean Version of ISAAC Questionnaire (한국판 국제 소아천식 및 알레르기 질환 연구 설문지의 신뢰도 및 타당도 연구)

  • Choi, Seong-Woo;Ju, Yeong-Su;Kim, Dae-Sung;Kim, Jae-Yong;Kwon, Ho-Jang;Kang, Dae-Hee;Lee, Sang-Il;Cho, Soo-Hun
    • Journal of Preventive Medicine and Public Health
    • /
    • v.31 no.3 s.62
    • /
    • pp.361-371
    • /
    • 1998
  • Recent increases of asthma and allergies in childhood made the need for a standardized approach to international and regional comparisons of their prevalence and severity. To address these issues, 'International Study of Asthma and Allergies in Childhood (ISAAC)' is currently underway. In Korea, 'Nationwide Study of Asthma and Allergies in Korean Children' began in 1995 according to ISAAC protocol. ISAAC written and video questionnaires were used in this survey, but their reliability and validity were not evaluated properly yet. In this study, our aim was to evaluate the reliability and validity of two kinds of questionnaires and their usefulness in international and regional comparisons. The test and retest of two questionniares were completed by male(n=110) and female(n=111) middle school students with two and three weeks interval each. Kappa(or weighted kappa) were calculated from each questions and validity coefficients were estimated from those statistics. In Korean version of written questionnaire, the questions for allergic rhinitis, atopic dermatitis, allergic conjunctivitis, and food allergy proved to have high kappa values (or weighted kappa values) and validity coefficients and they can be used in further studies without any correction. But some questions about asthma(especially nocturnal cough, wheezing in exercise, and severe asthma) and drug allergy need to be revised for better under-standing to study subjects. Video questionnaire has the same degree of reliability and validity when compared to written questionnaire and this is the unexpected result. Accordingly, it also need to be revised to overcome the racial and cultural differences of the study subjects. In conclusion, the Korean version of written and video questionnaires may be considered to be useful methods in international and regional comparisons of asthma and allergic diseases in childhood after correction of some questions.

  • PDF