• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.297-302
• /
• 2008

We present an electrical particle velocity profiler using particle transit time across uneven inter-gap electrodes. We measure both the particle position and velocity from the voltage signals generated by the particles passing across sensing electrodes, thus obtaining the velocity profile of the particles in a microfluidic channel. In the experimental study, we use polystyrene microparticles to characterize the performance of the electrical particle velocity profiler. The particle velocity profile is measured with the uncertainty of 5.44%, which is equivalent to the uncertainty of 5% in the previous optical method. We also experimentally demonstrate the capability of the present method for in-channel clogging detection. Compared to the previous optical methods, the present electrical particle velocity profiler offers the simpler structure, the cheaper cost, and the higher integrability to micro-biofluidic systems.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.885-891
• /
• 2012

This paper proposes a high-efficiency power amplifier (PA) with uneven bias. The proposed amplifier consists of a driver amplifier, power stages of the main amplifier with class AB bias, and an auxiliary amplifier with class C bias. Unlike other CMOS PAs, the amplifier adopts a current-mode transformer-based combiner to reduce the output stage loss and size. As a result, the amplifier can improve the efficiency and reduce the quiescent current. The fully integrated CMOS PA is implemented using the commercial Taiwan Semiconductor Manufacturing Company 0.18-${\mu}m$ RF-CMOS process with a supply voltage of 3.3 V. The measured gain, $P_{1dB}$, and efficiency at $P_{1dB}$ are 29 dB, 28.1 dBm, and 37.9%, respectively. When the PA is tested with 54 Mbps of an 802.11g WLAN orthogonal frequency division multiplexing signal, a 25-dB error vector magnitude compliant output power of 22 dBm and a 21.5% efficiency can be obtained.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.100-106
• /
• 2020

Turbopumps for liquid rocket engines are exposed to various cavitation instabilities under their operating conditions. The instabilities affect the stability of the turbopumps. To make sure of the stability of the turbopump of KSLV-II, the present work examined the characteristics of the cavitation instabilities during the turbopump assembly test. In the test, the LOx pump was operated under super-synchronous rotating cavitation and attached to uneven cavitation. In the vibration analysis of the fuel pump, the characteristic frequency by the super-synchronous cavitation of the LOx pump was clearly shown.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.270-279
• /
• 2000

Recently, according to increase in the requirement of electric power, a thermoelectric power plant equipped with pulverized coal combustion system is highly valued, because coal has abundant deposits and a low price compared with others. For efficient use of coal fuel, most of plant makers are studying to improve combustion performance and flame stability, and reduce pollutants emission. One of these studies is how to control the profile of particle injection and velocity dependant on coal nozzle configuration. Basically, nozzle which has mixed flow of gas and particle is required to have the balanced coal concentration at exit, but it is very difficult to obtain that by itself without help of other device. In this study, coal distribution and pressure drop in gas-solid flow are calculated by numerical method in nozzle with various shapes of venturi diffuser as a means to get even coal particle distribution. The tentative correlations of pressure drop and exit coal distribution are deduced as function of the height, length and reducing angle of venturi from the calculated results. When coal hurner nozzle is designed, these equations are very useful to optimize the shape of venturi which minimize uneven particle distribution and pressure drop within coal nozzle.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.11-19
• /
• 2006

Black-dyed PET fabrics were sputtered with stainless steel through DC-magnetron type device to investigate the possibility of coloration effect, and then considered the morphological structure and physical characteristics such as water permeation ability and washing fastness. Change in color was estimated on the basis of CIELAB color system. The color coordination of metal plated PET was shifted to yellow-red from red-blue. Colour difference$({\Delta}E^*)$ was increased by sputtering conditions with increasing ion current and treatment time. Especially, $Lightness(L^*)$ value of PET was remarkably increased by sputtering, whereas $Chroma(C^*)$ increased gradually. From SEM analysis, rough and uneven craters were found and thickened on the fiber surfaces with longer sputtering time. And washing fastness was a little poor and absorption ability slightly decreased. There were little changes of breaking load and breaking extension. It was evident that observed uneven craters in the plated thin layer resulted in the colour change of PET fabrics by sputtering treatments.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.5
• /
• pp.96-103
• /
• 2009

This paper describes a humanoid robot's intelligent foot with two six-axis force/moment sensors. The developed humanoid robots didn't get the intelligent feet for walking on uneven surface safely. In order to walk on uneven surface safely, the robot should measure the reaction forces and moments applied on the sales of the feet, and they should be controlled with the measured the forces and moments. In this paper, an intelligent foot for a humanoid robot was developed. First, the body of foot was designed to be rotated the toe and the heel to all directions, second, the six-axis force/moment sensors were manufactured, third, the high-speed controller was manufactured using DSP(digital signal processor), fourth, the humanoid robot's intelligent foot was manufactured using the body of foot, two six-axis force/moment sensors and the high-speed controller, finally, the characteristic test of the intelligent foot was carried out. It is thought that the foot could be used for a humanoid robot.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.940-950
• /
• 2010

In case of uneven surcharge like backfill or embankment after constructing caisson applied on the deep soft marine deposits, lateral deformation of soft soils would happen due to plastic deformation of soil particles by increase of excess pore water pressure. Lateral deformation of soil will result in the caisson displacement which affects soft soil-caisson structure safety. Soft soil was improved by soil compaction pile method, and then gravity caisson was installed. Soil deformations were monitored and analyzed with step by step backfill and embankment behind the caisson. Amount and speed of lateral deformation after the installation of caissons were closely related with the time of backfill and embankment. The relationship between maximum lateral displacement($\Delta_y$) in front of caisson and settlement($\Delta_s$) can be expressed as $\Delta_y=(0.0871)\Delta_s+122.95$. Soft soil depth did not affect the lateral displacement of caisson in this study, which can be explained the soft soil improvement under the caisson by S.C.P. method. Substantially the amount and speed of the lateral deformation of caisson were closely related with the uneven surcharging rate behind caisson.

• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.42-47
• /
• 2011

Recently, with the merits of simplicity, ease of mass production and cost effectiveness, a roll-to-roll (R2R) forming process is tried to be employed in the manufacturing of the circuit board, barrier ribs and other electronic device. In this study, the roll-to-roll process for the forming of micro-pattern in electronic device panel is designed and analyzed. In the preliminary experiments, two major defects, i.e., crack near the dimple wall and wrinkling on outside region of dimple, are found. The study on the crack prevention is carried out in previous works by authors. In this study, the cause of wrinkling and modification of tooling to prevent the wrinkling is studied. The main cause of wrinkling is considered to be the uneven material flow along the rolling direction. To reduce or to retard the wrinkling initiation, a dummy shape on outside the pattern is introduced. From the finite element analysis results, it is shown that the dummy shape can reduce the uneven material flow significantly. Finally the effect of dimensions of the dummy shape on material flow is investigated and the optimum dimensions are found.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.1
• /
• pp.63-69
• /
• 2010

In this paper, a new design method of asymmetrical configuration of main amplifier and peaking amplifier using changed bias point is proposed for excellent linearity, instead of the conventional Doherty structure. We have utilized the uneven wilkinson power divider for the unequal power drive at the input network of amplifiers. And we proposed a compensating method of the decreasing efficiency due to improving linearity using 3-stage Doherty structures. From the simulation results of asymmetrical Dohertry power amplifier and asymmetrical 3-stage Doherty power amplifier with uneven power drive are implemented. From the implementation and measurement results of the each amplifier, IMD characteristics have -55 dBc as the good efficiency of 13% compensates the decreased entire efficiency due to the improving linearity characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.359-364
• /
• 2008

Using multi beam echo sounder, side scan sonar and scuba diving equipment, ceramic type, uneven type and semicircle-ramus type reefs into sandy bottom were ascertained, the depth of submersion in 7.2-10.3m on the coast of Gangneung, East of Korea, forty uneven type artificial reefs(AR) were totally buried into the sandy bottom. Two of five semicircle-ramus type ARs had only of their top area exposed. For most of the 45 ceramic reefs, only the upper 25-150cm of ARs were visible. The burial pattern is different in west and east side of the reefs, where the east side is deeply buried compared to the west side. From these results. it is recommended that sufficient analysis of bottom structure and materials especially in the sandy sea area should be undertaken in order to determine the best type of artificial reefs to be deployed and the best location for depoloyment.