As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.
In this study, by using nickel chloride solution as a raw material, a nano-sized nickel oxide powder with an average particle size below 50 nm was produced by spray pyrolysis reaction. A spray pyrolysis system was specially designed and built for this study. The influence of nozzle tip size on the properties of the produced powder was examined. When the nozzle tip size was 1 mm, the particle size distribution was more uniform than when other nozzle tip sizes were used and the average particle size of the powder was about 15 nm. When the nozzle tip size increases to 2 mm, the average particle size increases to roughly 20 nm, and the particle size distribution becomes more uneven. When the tip size increases to 3 mm, particles with an average size of 25 nm and equal to or less than 10 nm coexist and the particle size distribution becomes much more uneven. When the tip size increases to 5 mm, large particles with average size of 50 nm partially exist, mostly consisting of minute particles with average sizes in the range of 15~25 nm. When the tip size increases from 1 mm to 2 mm, the XRD peak intensities greatly increase while the specific surface area decreases. When the tip size increases to 3 mm, the XRD peak intensities decrease while the specific surface area increases. When the tip size increases to 5 mm, the XRD peak intensities increase again while the specific surface area decreases.
Objectives: A study on the importance and consistency of pulse-daignosis in the Dongeuibogam Methods: We used Deyeuk Dongeuibogam of Dongeuibogam publishing company from original photographic edition. Results: The frequency of 27 mek (pulse condition) in Dongeuibogam is as in the following. Bumek (Floating pulse) appeared 120(8.9%) times, wanmek (moderate pulse) appeared 28(2%) times, chokmek (running pulse) appeared 7 (0.5%) times, gyumek (hollow pulse) appeared 19 (1.4%) times, saekmek (uneven pulse) appeared 33 (2.4%) times, sapmek (uneven pulse) appeared 51 (3.8%) times, kyulmek (knotted pulse) appeared 18 (1.3%) times, whalmek (slippery pulse) appeared 69 (5.1%) times, chimek (slow pulse) appeared 43 (3.2%) times, demek (intermittent pulse) appeared 13 (1%) times, silmek (replete pulse) appeared 45 (3.3%) times, bokmek (deep-sited pulse) appeared 29 (2.1%) times, neomek (firm pulse) appeared 4 (0.3%) times, hyunmek (taut pulse) appeared 110 (8.1%) times, yumek (soft pulse) appeared 20 (1.5%) times, dongmek (short and rapid pulse) appeared 16 (1.2%) times, kinmek (tense pulse) appeared 67 (5%) times, yakmek (weak pulse) appeared 46 (3.4%) times, semek (thready pulse) appeared 62 (4.6%) times, hongmek (full pulse) appeared 50 (3.7%) times, jangmek (long pulse) appeared 14 (1%) times, sakmek (rapid pulse) appeared 103 (7.6%) times, mimek (indistinctive pulse) appeared 65 (4.8%) times, danmek (short pulse) appeared 16 (1.2%) times, demek (large pulse) appeared 106 (7.9%) times, chimmek (deep pulse) appeared 112 (8.3%) times, heomek appeared 70 (5.2%) times, sanmek (scattered pulse) appeared 14(1%)times. Conclusions: We can know Donguibogam is given on the basis 27mek (pulse condition), because the frequency of 27mek (pulse condition) is high. But there are another expressions. So we can not say that Donguibogam is consistent in expressing mekbub(the way of pulse-diagnosis).
In modern times, it has been a most imporant problem for the community to make nation's information resources a\-ailable to all the people ~vithf ree and even access. In Nelson Associate's National platz for library service appeared in 1948, 50 million Americans were served by public libraries with inadequate service and 35 million have had no library service. Library Services Act signed bq- President Eisenhower in 1956 was a result of continuous efforts of AL.1 for 20 years. It aimed to extend public library service to rural population less than ten thousands. LSA was succeeded by LSCA in 1964 and continued with several amendments so far. 620 million dollars of Federal funds were put into local library administrati1.e agencies during 1957-1974 for the extension of library service and construction of library buildings. Federal funds also encouraged local library administrative agencies to ha\-e more interest in library and information service and carry out their own library programs. However, there are many current problems in Amierican pubic libraries still now, that is, uneven growth of public libraries, uneven distribution of information resources, inadequate library service to a large part of population, insufficient supply of library funds, lack of nationwide library network beyond local admini-strative jurisdictions and so on. National Advisory Commission on Libraries, Committee on Libraries, National Conference of Library and Inforination Science are results of government efforts to meet those problems and carry out effecti1.e nation's library policies. In other part, Congress authorized to open the White House Conference on Library and Information Science before 1978 to make a reco:nn:endation fostering the library use. It is expected that the elected President Carter will put more efforts in developing library and information services, for LSA and LSCA were mainly pushed ahead by Democratic Party. In conclusion I could find some factors through these analysis that would be of some help to develop nation's library and information services, especially in developing countries.
배터리 수명은 휴대폰, MP3 플레이어, PMP와 같은 모바일 디바이스의 품질에 있어 중요한 요소 중의 하나이다. 일반적으로 남은 배터리의 양은 셋 혹은 넷으로 균등하게 분할된 블록을 가진 '배터리 바' 아이콘에 의해 표시된다. 그러나 몇몇 휴대폰 제조사들은 균등분할 표시된 각 배터리 블록에 불균등하게 시간을 할당함으로써 사용자가 실제보다 배터리를 더 오래간다고 느끼도록 할 수 있다고 믿고 있다. 본 연구는 그러한 믿음에 대한 검증을 목적으로 두 번의 실험을 수행하였다. 첫 번째 실험은 배터리 바 블록마다의 불균등한 시간 비율이 배터리 수명에 대한 사용자들의 인지적 체감시간에 미치는 영향을 검증하기 위한 것이었다. 두 번째 실험은 배터리 바 표시와 실제 시간 비율 사이의 디스플레이 양립성이 사용자의 시간 인지에 어떤 영향을 주는지 밝히는 것을 목적으로 하였다. 실험 결과, 배터리가 얼마 남지 않음을 표시하는 (예. 배터리 바 한칸) 시간비율이 커지면 사용자는 배터리 수명이 더 짧다고 느끼는 경향이 있음을 보였다. 하지만 배터리가 가득 찬 경우를 표시하는 (예. 배터리 바가 모두 채워진 상태) 시간비율을 오래 유지하는 것은 사용자의 시간 인지에 어떤 영향도 주지 않았다. 이러한 결과는 모바일 디바이스의 배터리 바 표시설계에 대한 가이드라인으로 활용 가능할 것이다.
이 논문은 1960년대 박정희 대통령에 의해 추진된 경부고속도로의 건설에 내재된 이동성과 구획화의 정치에 초점을 두고, 이를 정치경제학적으로 분석하고자 한다. 경부고속도로는 첫째 교통로를 통한 이동성의 창출로 권위주의적 정치권력을 강화하고 사회공간적 통합을 이루어내는 중요한 힘이었으며, 둘째 '비장소'로서 새로운 '기계공간'의 확충을 통해 국토공간의 물리적 경관과 국민들의 일상생활의 리듬을 바꾸어 놓는 위력을 가졌고, 셋째 시공간적 압축을 통해 자본의 회전시간을 단축하여 자본주의 경제가 발전할 수 있는 물적 토대를 제공했다. 그러나 경부고속도로는 이에 포섭된 지역(수도권과 동남임해지역)과 배제된 지역(즉 호남지역과 강원지역)간 불균등발전을 틀지웠을 뿐만 아니라, 결국 이에 포섭된 지역들 내에서도 불균등발전을 심화시켜 수도권과 그 외 지역들 간을 구획화하는 정치경제적 균열화를 초래했다. 경부고속도로는 또한 이동성의 심화에 따른 장소 소외와 건설 운영과정에서 생태적 문제를 유발하였다. 이러한 '고속도로의 비극'을 해소하고 고속도로가 진정한 균형과 통합의 길로 거듭나기 위하여 '지속가능한 정치'가 요구된다.
This study was conducted to provide a counterplan for preventing so celled “plastic house syndrome” revealed among farmers spending much time in the plastic houses. For this, working environment inside a plastic house was observed. Then, experiments were carried out mostly in a climatic chamber with three kinds of working posture on uneven($D_1-F_1$) or even($D_2-F_2$) ground surface. Tested work loads with three kinds of working posture were : moving in a sitting posture with attaching breast to legs and waving arms ($A_1$), moving in a bending posture with waving arms ($B_1$), and moving a 6kg weighting luggage in a standing posture ($C_1$) Physiological responses in the workers to three different work loads were observed in a climatic chamber, with or without using some instruments, to evaluate work efficiencies. The results obtained are summerized as follows. 1. $C_1$ was the hardest work and $B_1$ was harder than $A_1$ on the even ground. 2. Worker's physiological fatigue and physical loads remarkably decreased when using the instruments such as a chair and a cart with some rollers on the even ground. 3. Working with pushing a cart($F_1$) was the hardest work, and standing($D_1$) was harder than walking($E_1$) on the uneven ground. 4. Worker's physiological fatigues and physical loads remarkably decreased on the even ground. 5. Similar results were obtained when the same experiment was carried out in a plastic house.
본 논문에서는 4 족 보행로봇의 비평탄면 갤로핑 알고리즘을 제안하였다. 몸체의 균형은 지면접촉순간의 지면반발력에 의해 결정되므로 안정된 보행을 위해 발과 지면과의 접촉력을 제어하였다. 각 발의 지면접촉힘을 제어하기 위해 우선 요구되는 지면접촉힘을 결정하고 지면접촉구간에서 실제 접촉힘과 비교하고 그 차이에 따라 발의 궤적을 수정하게 된다. 요구되는 지면접촉력은 원하고자 하는 각운동량 및 선형운동량의 변화에 따라 결정되며, 각 발에 요구되는 접촉힘으로 퍼지로직에 의해 분배된다. 리커다인을 이용한 동역학 모델 시뮬레이션을 통해 본 논문에서 제안된 방법이 비평탄면에서의 안정적인 보행에 적합함을 검증하였다.
본 논문은 의사-임피던스 모델을 이용하여 2족보행로봇이 비평탄면에서 보행하는 제어기법을 제안한다. 의사-임피던스 모델은 인간이 보행 시, 발바닥이 지면과 순응하는 동작을 모사하였다. 지면과 접촉하면서 인간의 발바닥은 2가지 보행상태를 갖게 된다. 첫 번째 상태에서는 지면과 순응하기 위해 노력이나 의도적인 토크를 가하는 것이 아니라 수동적인 모션으로 순응하게 된다. 두 번째 상태에서는 지면과 접촉한 후, 적절한 토크를 유지하여 인간의 몸이 보행을 지속할 수 있게끔 유도하며 이를 하중이동단계라고 한다. 이러한 과정이 안정적으로 로봇의 보행을 유지할 수 있음을 12자유도의 2족보행로봇과 6축의 힘을 가지는 환경모델을 반영한 시뮬레이션을 통해 보여준다. 이러한 시뮬레이션결과가 제안된 의사-임피던스 모델이 효과적임을 보여준다.
Purpose: Microfat graft is a common procedure for correcting tear trough deformity and dark circle. Because the tissue in this area is very thin, the grafted fat, sometimes, induces palpable lumps and uneven skin contour. When it happens, the surgical removal of the grafted fat is often needed. The authors made attempt of transconjunctival approach for removal, and this made infraorbital fat repositioning possible at the same time. Methods: 15 female patients with history of microfat graft on lower eyelid, got operation for the grafted fat removal with transconjunctival approach from April of 2009 to July of 2010. The dissection was performed in accordance with infraorbital fat repositioning surgery. Through the transconjunctival incision, knotted fat on orbital septum and orbicularis oculi muscle was removed without damage on skin. After grafted fat removal, subperiosteal space was made 1~2 mm below the inferior orbital rim by elevating periosteum. With preserving orbital septum, infraorbital fat was repositioned and anchored to subperiosteal space. Finally, transconjunctival incision was closed with absorbable suture material. Results: 14 patients in the study showed satisfactory results. The problems like uneven skin contour and knotted fat mass, were all solved. In only one patient, incomplete correction was observed, as bulging on her right lower eyelid still remained. One patient complained of transient numbness on lower eyelid, but there was no specific complication other than this. Conclusion: The authors attempted the method of transconjunctival approach to remove former grafted fat in lower eyelid and reposition infraorbital fat simultaneously. Since the study brought great results, the method would be helpful to patients and surgeons.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.