• Steel and Composite Structures
• /
• v.50 no.1
• /
• pp.107-122
• /
• 2024

Following an internal column failure, adjacent double-span beams above the failed column will play a critical role in the load transfer and internal force redistribution within the remaining structure, and the span-to-depth ratios of double-span beams significantly influence the structural resistance capacity against progressive collapse. Most existing studies have focused on the collapse-resistant performances of single-story symmetric structures, whereas limited published works are available on the collapse resistances of multi-story steel frames with unequal spans. To this end, in this study, numerical models based on shell elements were employed to investigate the structural behavior of multi-story steel frames with unequal spans. The simulation models were validated using the previous experimental results obtained for single- and two-story steel frames, and the load-displacement responses and internal force development of unequal-span three-story steel frames under three cases were comprehensively analyzed. In addition, the specific contributions of the different mechanism resistances of unequal-span, double-span beams of each story were separated quantitatively using the energy equilibrium theory, with an aim to gain a deeper level of understanding of the load-resistance mechanisms in the unequal-span steel frames. The results showed that the axial and flexural mechanism resistances were determined by the span ratio and linear stiffness ratio of double-span beams, respectively.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.59-64
• /
• 2016

This paper presents a high dividing ratio unequal dualband divider using coplanar waveguide (CPW) and shunt connected open stub transmission lines. In order to implement transmission lines for a dualband divider using design equations, the low impedance lines of divider can be realized a shunt connected open stub transmission line. Also, the high impedance lines are realized by CPW transmission lines. To certify the validity of an unequal dualband divider using CPW and shunt connected open stub transmission lines, the 10:1 unequal dualband divider is implemented at operating frequency of 1 and 2 GHz. Good experimental performance at each frequency are obtained, which are in good agreement with the simulated results.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.578-584
• /
• 2011

This paper presents the design and measured performances of an unequal dual-band power divider using lumped elements. After the divider is designed using the conventional single band Wilkinson topology with lumped elements, we obtained the dual band characteristics with filter conversion method. This design method has the features of compact size and easy fabrication, because the high impedance transmission line realizes the lumped elements of equivalent circuit. As an example, an 2:1 divider has been designed and measured at 880 MHz and 1650 MHz in order to show the validity of the proposed unequal divider. The measured performances of the unequal power divider agree with the simulation results.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.240-245
• /
• 2016

Scalable video streaming over wireless networks has many challenges. The most significant challenge is related to packet loss. To overcome this problem, in this paper, we propose an unequal loss protection (ULP) method using a new forward error correction (FEC) mechanism for robust scalable video streaming over wireless networks. For an efficient FEC assignment considering video quality, we first introduce a simple and efficient performance metric, the layer-based recovery rate (LRR), for quantifying the unequal error propagation effects of the temporal and quality layers on the basis of packet losses. LRR is based on the unequal importance in both the temporal and the quality layers of a hierarchical scalable video coding structure. Then, the proposed ULP-LRR method assigns an appropriate number of FEC packets on the basis of the LRR to protect the video layers against packet lossy network environments. Compared with conventional ULP algorithms, the proposed ULP-LRR algorithm demonstrates a higher performance for various error-prone wireless channel statuses.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.663-669
• /
• 1998

In this paper, a beam design method is presented for the planar array with unequal transducer sensitivities. Basically the proposed method consists of two steps. At first, the optimum weightings are designed with the assumption that all array elements have an uniform sensitivity. Next, the compesnated weightings for the unequal transducer sensitivities can reversely be determined from an inverse problem utilizing the design beam pattern evaluated by the predetermined optimal weightings. A numerical example is inculded to illustrate the proposed method.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.194-197
• /
• 1988

The unequal bit-error-probability of rate r=b/n binary convolutional code is analyzed. The error protection affored each digit of the b-tuple information word can be different from that afforded other digit. The property of the unequal protection can be applied to transmitting sampled data in PCM system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.795-803
• /
• 2006

In this paper, we studied hierarchical channel coding scheme using unequal error protection method fur consecutively broadcastingservice under the rain attenuation of Ka band satellite broadcasting. Unlike time-sharing methods, which are design for different channel coding scheme in according to different modulation, unequal error protection method is made in such way that minimum distance between signals are different for importance of signals with same modulation. Consequently we proposed optimal method according to performance analysis.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.335-338
• /
• 2005

In this paper, we propose a downlink power control scheme to apply in the unequal error protection multi-code CDMA mobile medicine system. The mobile medicine system contains (i) blood pressure and body temperature measurement value, (ii) ECG medical signals measured by the electrocardiogram device, (iii) mobile patient's history, (iv) G.729 audio signal, MPEG-4 CCD sensor video signal, and JPEG2000 medical image. By the help of the multi-code CDMA spread spectrum communication system with downlink power control scheme and unequal error protection strategy, it is possible to transmit mobile medicine media and meet the quality of service. Numerical analysis and simulation results show that the system is a well transmission platform in mobile medicine.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.595-602
• /
• 2015

The rotor configuration of the brushless doubly fed induction generator (BDFIG) plays an important role in its performance. In order to make the magnetomotive force (MMF) space vector in one set rotor windings to couple both magnetic fields with different pole-pair and have low resistance and inductance, this paper presents a novel wound rotor type for BDFIG with low space harmonic contents. In accordance with the principles of slot MMF harmonics and unequal element coils, this novel rotor winding is designed to be composed of three-layer unequal-pitch unequal-turn coils. The optimal design process and rules are given in detail with an example. The performance of a 700kW 2/4 pole-pair prototype with the proposed wound rotor is analyzed by the finite element simulation and experimental test, which are also carried out to verify the effectiveness of the proposed wound rotor configuration.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.1
• /
• pp.54-60
• /
• 2001

In this paper, a shape-based block layout (SBL) approach is presented to solve the facility layout problem with unequal-area and fixed shapes. The SBL approach employs hybrid genetic algorithm (Hybrid-GA) to find a good solution and the concept of bay structure is used. In the typical facility layout problem with unequal area and fixed shapes, the given geometric constraints of unequal-area and fixed shapes are mostly approximated to original shape by aspect ratio. Thus, the layout results require extensive manual revision to create practical layouts and it produces irregular building shapes and too much unusable spaces. Experimental results show that a SBL model is able to produce better solution and to create more practical layouts than those of existing approaches.