• 한국음향학회지
• /
• 제42권3호
• /
• pp.250-261
• /
• 2023

본 연구에서는 펌프젯 추진기를 대상으로 공동, 비공동 조건에서의 유동 소음원을 규명하기 위하여 추진기의 각 구성품인 덕트와 스테이터, 로터에 의한 소음 기여도를 평가하였으며, 공동과 비공동 조건에서의 소음 수준을 비교하였다. 대형 캐비테이션 터널 내 Suboff 잠수함 선형과 펌프젯 추진기를 대상으로 균일혼상류 가정의 비정상 비압축성 Reynolds averaged Navier-Stokes(RANS) 방정식을 적용하였으며, 이상 유동을 모사하기 위해 Volume of Fluid(VOF) 기법과 Schnerr-Sauer 공동 모델을 적용하였다. 유동해석 결과를 기반으로 수중방사소음을 예측하기 위해 Ffowcs Williams and Hawkings(FW-H) 방정식 기반의 음향상사법을 적용하였으며, 덕트와 스테이터, 로터로 구성된 3개의 비투과성 적분면과 추진기를 감싸는 형태의 2가지 투과성 적분면을 선정하여 소음 기여도를 평가하였다. 소음 예측결과로부터 스테이터는 전체 소음에 대한 직접적인 기여도는 낮으나 덕트와 로터에서의 유동 박리에 의한 소음원 형성에는 영향을 미치는 것을 확인하였으며, 유동이 박리되는 연직상방과 우측방향으로 소음이 크게 방사되었다. 또한 로터에서는 날개의 흡입면과 압력면 간의 압력 섭동에 의해 추진방향으로 소음이 크게 방사되었으며, 투과성적분면을 통해 체적 소음원인 공동의 효과를 반영할 수 있음을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제25권3호
• /
• pp.15-28
• /
• 2016

수중환경에서 운영되는 무기체계 획득을 위한 설계/개발을 진행하기 위해 수중음향채널 모델링 및 시뮬레이션을 통한 분석은 필수적이다. 일반적으로 수중음향채널 분석을 위해 사용되는 수중음향 전파 수치해석 모델은 음선이론 법, 정규방식 법, 포물선방정식 법, 파수적분 법이 있으나 다중 주파수 분석일 경우 유효성과 신호처리 및 분석에 제한적이다. 본 논문은 단일 및 다중 주파수 분석 및 신호처리 및 분석이 용이한 기존 의사 스펙트럼 시간영역 법 수중음향 수치해석 모델에 수중환경 소음 모델을 적용하여 실제 수중환경과 유사한 합성환경 수중음향채널을 모델링 하였다. 이렇게 구현된 합성환경 수중음향채널 모델의 유효성을 확인하기 위해 단일 주파수 신호 시나리오 4가지 다중 주파수 신호 시나리오 4가지 및 잠수함 기동에 따른 방사소음 분석 시나리오 시뮬레이션을 통해 의사 스펙트럼 시간영역 법 합성환경 수중음향채널 모델 유효성을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.809-810
• /
• 2011

• 전자공학회논문지C
• /
• 제34C권1호
• /
• pp.51-58
• /
• 1997

In passive sonar, the frequency spectrum of a sound radiated by underwater moving targets is composed of a broadband nonuniform background noise and narrowband discrete tonals. To detect the tonals, the background noise is estimated and removed. Using the existing algorithms that estimate the background noise, a week tonals are not detected. Because a freuqency line that is formed by tonals which are being extracted continuously is a feture of the target, we are nessesory to efficiently detect the tonals that compose the frequncy line. In this paper, we propose an efficient neural network that can remove automatically the background and detect the even errl tonals, and we extract the frequency line feature on the spectrogram by the proposed algorithm. The experimental results for a ship's radiated sound show a better performance in comparison with the existing TPM algorithm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.528-533
• /
• 2010

This paper describes a calculation method of source level of a ship transient noise, which is one of the important elements for the ship detection. Aim of transient noise measurements is to evaluate of acoustic energy due to singular occurrence, which is therefore defined as non-periodic and short termed events like an attack periscope, a rudder and a torpedo door. In generally, in the case of randomly spaced impulse, the spectrum becomes a broadband random noise with no distinctive pattern. Therefore, frequency analysis is not particularly revealing for type of signal. In the paper, it is performed in time domain to analyze a transient noise. However, a source level of transient noise is required an investigation for multiple frequency band. So, in order to calculate a source level of transient noise, a design of exponential weighting function, convolution, band pass filtering, peak detection, root mean square, and parameter compensation are applied. The effectiveness of this calculation scheme is studied through computer simulations and a sea test. Furthermore, an application of the method is applied in a real case.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1185-1191
• /
• 2000

In general, the strength of hull structures can be estimated from stress evaluation considering static and hydro-dynamic load due to sea-wave. However, war ships such as submarine, have frequently experienced the underwater explosion and local structures of ship as well as hull girder can be damaged by the dynamic response excited from underwater non-contact explosion. When explosion happens at underwater, shock wave is radiated In early short time, then gas bubbles are generated, and expansion and contraction are repeated as they float to the surface. The shock wave causes the damage of equipment and its supporting structures, on the other hand, the hull girder strength can be lost by resonance between bubble pulsation and lowest ship natural vibration period. In this paper, the hydro-Impulse force due to bubble was calculated. Based on these results the hull girder strength of submarine was estimated from transient response analysis by using NASTRAN. Also, shock analysis for some equipment supporting structures was carried out by using DDAM. In order to evaluate the strength of these local structures due to shock wave.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.437-444
• /
• 2012

In this paper, the measurement method of the decoupling performance of a underwater decoupling material is studied. First, the simple vibro-acoustic coupled model of a multi-layered underwater decoupling material attached to a plate is analytically derived using impedance transfer matrix. Two test methods are introduced using the theoretical expression of the simple model. One is based on the ratio of the plate vibration and the radiated pressure under impact excitation of the plate. The other is based on the reciprocity theorem and uses the ratio of the incident pressure and the plate vibration under projector excitation in water. Some measurements are carried out according to the test methods using a pulse tube. The test results show the advantages and disadvantages of two methods. It is also shown that the combination of impact and projector excitation methods may be a useful tool to evaluate the performance of a underwater decoupling material.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.468-474
• /
• 2011

Underwater radiated noises from marine vehicles are mostly due to the propulsion systems. Recently, the propeller noise problems are becoming crucial issues in terms of habitability of passenger ships. Especially in military area, propeller noise is directly related to the survivability of submarines and warships, and thus propeller noise analysis and reductions are very important. Generally, propeller noise can be classified into non-cavitating noise and cavitating noise which is dominant. In this paper the methodology of propeller noise analysis is announced and new approach to consider scattering effect is proposed. Unsteady blade surface pressure and sheet cavity volume analyzed with potential based panel method are used as noise source.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.475-481
• /
• 2011

Underwater radiated noises from marine vehicles are mostly due to the propulsion systems. Recently, the propeller noise problems are becoming crucial issues in terms of habitability of passenger ships. Especially in military area, propeller noise is directly related to the survivability of submarines and warships, and thus propeller noise analysis and reductions are very important. Generally, propeller noise can be classified into non-cavitating noise and cavitating noise which is dominant. In this paper the methodology of propeller noise analysis is announced and new approach to consider scattering effect is proposed. Unsteady blade surface pressure and sheet cavity volume analyzed with potential based panel method are used as noise source.