• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.235-242
• /
• 2006

This paper proposes the new efficient system design strategies for the acoustic-based underwater communication system and it's media access protocol, which make it possible to control the multiple vehicles for underwater duty working by the surface plant. For an approach to implementation of the system, it is inevitable to establish acoustic-based underwater digital communication network to exchange the information between a surface plant and multiple vehicles in underwater.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.463-471
• /
• 2020

Recently, various tries to apply ROV (Remotely Operated Vehicle) into underwater are being developed. However, due to underwater environment uniqueness, the additional problem must be taken into account when designing an ROV for the inspection of the underwater structure. This is because a GPS-based information method cannot be applied, and the obtainable image is also dependent on the turbidity. Also, it is necessary to be able to satisfy waterproof and operating speeds in consideration of most practical application environments. This paper describes the design results of the ROV system for underwater structure inspection considering the above problems. The designed system applied INS / DVL for location recognition and was configured to support 3D mapping and stereo camera-based image information using sonar depending on visibility. To satisfy the waterproof, a pressure vessel using a composite material was applied. And over-actuated system using eight thrusters to maintain a stable posture and operating speed was applied also. The designed system was verified by structural analysis and flow analysis also.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.90-95
• /
• 2000

This paper presents the vergence control of a parallel stereo camera and its application to underwater stereo camera to enhance the working efficiency of underwater vehicles that equips with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get a clear stereo vision with the camera for all the range of objects in air and in water, especially in short range objects. The control system of the camera is so simple that we are able to realize a small stereo camera system and to apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain the three-dimensional images and the distance information in real-time.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.79-84
• /
• 2001

This paper present the control of the image disparity of a parallel stereo camera and its application to an underwater stereo camera to enhance the working efficiency of underwater vehicles that are equiped with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get clear stereo vision with the camera for all the range of objects in air and in water, especially in short range object. The control system of the camera is so simple that we are able to realize a small stereo camera system and apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain three-dimensional images and distance information in real-time.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.226-234
• /
• 2016

In this study, a model-referenced underwater navigation algorithm is proposed for high-precise underwater navigation using monocular vision near underwater structures. The main idea of this navigation algorithm is that a 3D model-based pose estimation is combined with the inertial navigation using an extended Kalman filter (EKF). The spatial information obtained from the navigation algorithm is utilized for enabling the underwater robot to navigate near underwater structures whose geometric models are known a priori. For investigating the performance of the proposed approach the model-referenced navigation algorithm was applied to an underwater robot and a set of experiments was carried out in a water tank.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1328-1336
• /
• 2012

Compared to terrestrial RF communications, underwater acoustic communications have several limitations such as limited bandwidth, high level of fading effects, and a large underwater propagation delay. In this paper, in order to tackle those limitations of underwater communications and to make it possible to form a large underwater monitoring systems, we propose a hierarchical underwater network architecture, which consists of underwater sensors, clusterheads, underwater/surface sink nodes, autonomous underwater vehicles (AUVs). In the proposed architecture, for the maximization of packet delivery ratio and the minimization of underwater sensor's energy consumption, a hybrid routing protocol is used. More specifically, cluster members use Tree based routing to transmit sensing data to clusterheads. AUVs on optimal trajectory movements collect the aggregated data from clusterhead and finally forward the data to the sink node. Also, in order to minimize the maximum travel distance of AUVs, an Integer Linear Programming based algorithm is employed. Performance analysis through simulations shows that the proposed architecture can achieve a higher data delivery ratio and lower energy consumption than existing routing schemes such as gradient based routing and geographical forwarding. Start after striking space key 2 times.

• Ocean Systems Engineering
• /
• v.6 no.3
• /
• pp.217-231
• /
• 2016

This paper presents a new approach for underwater image analysis using the bi-dimensional empirical mode decomposition (BEMD) technique and the phase congruency information. The BEMD algorithm, fully unsupervised, it is mainly applied to texture extraction and image filtering, which are widely recognized as a difficult and challenging machine vision problem. The phase information is the very stability feature of image. Recent developments in analysis methods on the phase congruency information have received large attention by the image researchers. In this paper, the proposed method is called the EP model that inherits the advantages of the first two algorithms, so this model is suitable for processing underwater image. Moreover, the receiver operating characteristic (ROC) curve is presented in this paper to solve the problem that the threshold is greatly affected by personal experience when underwater image edge detection is performed using the EP model. The EP images are computed using combinations of the Canny detector parameters, and the binaryzation image results are generated accordingly. The ideal EP edge feature extractive maps are estimated using correspondence threshold which is optimized by ROC analysis. The experimental results show that the proposed algorithm is able to avoid the operation error caused by manual setting of the detection threshold, and to adaptively set the image feature detection threshold. The proposed method has been proved to be accuracy and effectiveness by the underwater image processing examples.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.275-281
• /
• 2011

To acquire an underwater topographic information is necessary for the design and construction of structures in marine and inland water. It consists of water depth information by bathymetric survey and underwater bottom topography image information can be obtained by side scan sonar in different ways. For the purpose of providing high quality data by means of engineering site survey, it is necessary to apply simultaneous acquisition of two information and carry out the integrated interpretation to each other. The present research aims to obtain information of the underwater topography and water depth at the same time using interferometer technique, and to validate interferometer technique with accuracy estimation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.193-200
• /
• 2013

In this paper, underwater acoustic image classification of a cylindrical object using the Hough transformation is proposed. Hough transformation is often used to classify a cylindrical object in the optical systems. However, it is difficult to apply to the underwater acoustic image system because of lower resolution and noisier underwater environments. Thus, the cylindrical object was modeled and its geometric depth(GD) pixels were restored in order to make them suitable for the Hough transformation by using moving average filter and a polynomial interpolation method. As a result, restored GD pixels are similar to original ones and test results show high performance in classification.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.6-12
• /
• 2010

In this paper a cross layer protocol, referred to as an underwater ad-hoc communication (UAC) protocol, is proposed for underwater acoustic networks (UANets). An underwater node (UN), which tries to transfer data to another UN or a buoy in ad-hoc manner, can access channel as well as determine routing path by employing the UAC protocol. The channel access, route determination, and reliable data transfer are designed being adaptive to underwater environments. In addition, we propose both UN and packet architectures in order to efficiently implement the UAC protocol for UANets.