• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1658-1660
• /
• 2000

Simple signs were usually exchanged as the means of underwater communications. As people recently, need more informations for underwater activities, necessities of underwater communication systems exchanging hunman voice are increased. The purpose of this paper is understanding the ordinary characteristics of underwater communication and investigating the necessary conditions for a good underwater communication system by making a basic communication module. The experiment is achieved by applying AM (Amplitude Modulation) which is mainly used for the underwater communication systems and using common ultrasonic transducers. Ultrasonic transducers usually have narrow bandwidth for transducing electrical energy to mechanical energy. For improvement of sound reconstruction, transducers need more bandwidth which covers voice's frequency range, and goof linearity characteristics in this frequency range. As underwater transmissions have many factors to distort signals. Amplitude Modulation is not a proper way for underwater communications. Using digital signal by sampling human voice should be a good way for this systems, because digital communication simplify transmitting signals.

• 한국음향학회지
• /
• 제10권1호
• /
• pp.92-96
• /
• 1991

• 센서학회지
• /
• 제8권2호
• /
• pp.102-107
• /
• 1999

저주파용 광섬유 하이드로폰을 개발하기 위하여 본 논문에서는 2 채널을 가진 TDM 방식 광섬유 하이드로폰 배역을 구성하고 이를 수조에서 음향특성 실험을 수행하였다. 150m의 광섬유를 중공 원통형 맨드릴에 감아 광섬유 하이드로폰을 제작하였으며 저주파용임을 감안하여 맨드릴의 고유진동수를 10kHz이상에 위치하도록 설계하였다. 제작된 광섬유 하이드로폰은 수중과 음향 임피던스 정합을 이루기 위하여 폴리우레탄으로 몰딩 하였다. 음향 특성을 보기 위하여 TDM 방식의 불평형 간섭계를 구성하여 수조에서 3kHz의 연속파형을 신호입력으로 실험하였다. 실험 결과 제작된 TDM 방식의 광섬유 하이드로폰은 수중에서 3kHz의 음향 신호를 안정적으로 검출함을 확인하였다. 이는 향후 다채널을 가진 광섬유 하이드로폰 배열 개발에 응용 가능성이 기대된다.

• 수산해양기술연구
• /
• 제21권1호
• /
• pp.12-18
• /
• 1985

고압변압기의 1차측을 제어하고 2차측에 유도된 전압을 이용한 수중방전음원의 전기음향학적 제특성을 분석.검사한 결과는 다음과 같다. 1. 방전시 2차측 전류는 초기에는 Ohm 법칙을 따르다가 전류가 최고 6.3A 흘러 절연 파괴되었으며, 그 순간 방전음이 생성되었다. 2. 전류인가점과 방전음 생성문의 시간차는 약 3ms였으며, 전압이 최고일 때 절연파괴가 일어나 방전음이 생성되었다. 3. 전극의 끝이 뾰족할수록 2차측 전압이 높을수록 음압수준은 높았다. 4. 뾰족한 형태의 전극은 전극간격이 100cm일 때도 방전이 일어났으며 전극간격이 1cm이상부터 비교적 안정된 방전음이 생성되었다. 5. 방전음의 펄스폭은 약 0.15ms인 Shock Wave였으며, 10HKz 이하의 합성저주파 성분이었다.

• The Journal of the Acoustical Society of Korea
• /
• 제21권1E호
• /
• pp.25-30
• /
• 2002

We report on the development of a fiber optic hydrophone consists of a sensing Michelson interferometer and a compensating Mach-Zehnder interferometer for optical path length compensation. The double interferometer configuration has the following advantages: the hydrophone can be made more small; a laser source with a relatively short coherence length can be used; and the compensating interferometer can be located near the signal processing electronics, far away from the sensing interferometer and noise introduced by reference arm can be greatly reduced. The performance of the hydrophone is evaluated experimentally by immersing the sensing interferometer in a water tank to detect underwater acoustic signals generated by an acoustic wave projector. Experimental results show that over the frequency range of 1 to 4 kHz, the hydrophone has an almost flat response with an average normalized sensitivity of -302 dB re 1/ μ Pa.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.113-124
• /
• 1992

The offshore industry created a need for quality wet weld repairs. Wet welding is a fast method of repair providing sound, structural quality welds. It requires less support equipment than a similar underwater dry weld repair or the alternative mechanical connections. Compared to welds made in air, underwater wet welds are plagued by increased hardness due to rapid quenching by the surrounding water. In this paper is described the experimntal study of improving the cooling rates of wet welds of TMCP steel plate by shielding around weld arc surroundings. The principal results of this experimental investigation can be summarized as follows : By shielding around weld arc surrounding, the cooling rates resulting from wet welds on TMCP steel plate could be lower than that of nonshielded wet welds and the fesibility on high quality of mecanical properties of wet weld on TMCP steel plate was carried out with shielded weld arc surrounding.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.19-23
• /
• 1986

This paper describes that air noise and underwater noise in the Somjin Estuary are measured and analysed to get the basic data to find out the influence of environment on the underwater. The results obtained are summerized as follows: 1. The spectrum level of air noise in the Somjin Estuary increases until 500Hz, and decreases a little over 2KHz. 2. The spectrum level of underwater noise in the Somjin Estuary increases from 50 Hz to 1 KHz, but it decreases over 1 KHz as the depth is deeper. 3. When the influence of other factors is scarce but the influence of flowing speed is significant, the noise level seems to be higher at speedy layer than at slower layer. 4. The underwater sound level seems to be wider at speedy layer than at slower layer.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.394-400
• /
• 2013

Underwater radiated noise is one of the important performances related to stealth of the naval vessel. However, the evaluation can't be performed frequently due to the cost. Therefore, the estimation method of the underwater radiated noise with average hull vibration is suggested in this paper assuming that the hull of the ship is infinite plate which consists of various unit plates. Through the experiment, the estimated noise is verified from the comparison to the measured data. In addition the difference of underwater radiated noise according to the operating equipments is estimated with measured vibration velocity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.344-347
• /
• 2006

Noise reduction and control is an important problem in the performance of underwater acoustic system and on the habitability of the passenger ship for crew and passenger. Furthermore, sound generated by a propeller is critical in underwater detection and is often related to the survivability of the vessel especially for military purpose. Generally propeller noise is often the dominant noise source of marine vehicle. The flow field is analyzed with potential-based panel method, and then the time dependent pressure and sheet cavity volume data are used as the input for Ffowcs Williams-Hawkings formulation to predict the far-field acoustics. Through this study, the dominant noise source of underwater propeller is analyzed, which will provide a basis for proper noise control strategies.

• 한국해양공학회지
• /
• 제34권2호
• /
• pp.147-154
• /
• 2020

Underwater acoustics that is the study of the phenomenon of underwater wave propagation and its interaction with boundaries, has mainly been applied to the fields of underwater communication, target detection, marine resources, marine environment, and underwater sound sources. Based on the scientific and engineering understanding of acoustic signals/data, recent studies combining traditional and data-driven machine learning methods have shown continuous progress. Machine learning, represented by deep learning, has shown unprecedented success in a variety of fields, owing to big data, graphical processor unit computing, and advances in algorithms. Although machine learning has not yet been implemented in every single field of underwater acoustics, it will be used more actively in the future in line with the ongoing development and overwhelming achievements of this method. To understand the research trends of machine learning applications in underwater acoustics, the general theoretical background of several related machine learning techniques is introduced in this paper.