Five-Axis machines can generate undesirable defects such as the undercutting and overcutting errors that frequently occur in the three-axis machining process. It is therefore necessary to develop a program for NC-code generation, whereby the cutter posture is considered to decrease the occurrence of defects. In previous studies, the Easy-Impeller CAM(E-ICAM), an automatic CAM program used for the five-axis machining of impellers, was developed; however, when E-ICAM is used to machine an impeller, it is possible to gouge the hub and blade. Therefore, the aim of this study is the establishment of a formula for each type of endmill to minimize gouging according to the cutter posture, in consideration of several factors that affect accuracy in the machining of an impeller. This study also aimed to improve the performance and accuracy of E-ICAM in the manufacturing of impellers.
The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very important. To investigate the effectiveness of advanced composite materials for the application in offshore environments, the tensile test, hardness test, undercutting property test, permeance test and the friction and wear test were carried out by using various applicable coating materials. The main results obtained can be summarized as follows; 1. The micro-hardness of the Archcoat 502B showed the highest value. 2. The coefficient of friction of the Rigspray coating at the speed of 2.21m/sec showed the lowest value, and that of the Archcoat 502B coating at 1.08m/sec and 0.18m/sec indicated the lowest values. 3. The wear mass at the speed of 0.18m/sec and 1.08m/sec in dry condition showed the smallest values. 4. The Archcoat 502B coating is fitted to the dynamic instruments in the range of low speed and middle speed. Rigspray coating is fitted to the dynamic instruments in the range of high speed. 5. The wear mass of five kinds of coating materials at the range of low speed was very small, and those of the Archcoat S02B, Archcoat 402B and Rigspray coating at high speed range were quitely smaller than those of the Modified Epoxy and Tar Epoxy.
This study was conducted to increase to increase the plant species diversity, which was based on the analysis of plant community structure and the survey of human's disturbance degree in Mt. Yongma and Mt. Acha urban nature park, Seoul. The plant community were divided into four groups by TWINSPAN and DCA. These groups were Pinus rigida-P. densiflora community, Quercus mongolica-Q.aliena-Q.accutissima community, Robinia pseudoacaia-Q.accutissima-Poplus${\times}$albaglandulosa community and R.pseudoacacia community. The successional trends of tree species seems to be from P.densiflora, P.rigida, Sorbus alniflora to Q.mongolica, Q.aliena and from P.${\times}$albaglandulosa, R.pseudoacacia, through Q.accutissima, to Q. mongolica, Q.aliena. The species diversity of plant community was high in natual plant community but was low in artificial planting community respectively. Number of species, number of species individuals, indices of species diversity was lowered and soil hardness was increased by the user's trampling, undercutting work and planting P.koraiensis after thinning. In the basis of study results, we proposed the management plan for the urban forest.
Objective : Lumbar spinal stenosis is a common degenerative spine disease that requires surgical intervention. Currently, there is interest in minimally invasive surgery and various technical modifications of decompressive lumbar laminectomy without fusion. The purpose of this study was to present the author's surgical technique and results for decompression of spinal stenosis. Methods : The author performed surgery in 57 patients with lumbar spinal stenosis between 2006 and 2010. Data were gathered retrospectively via outpatient interviews and telephone questionnaires. The operation used in this study was named central decompressive laminoplasty (CDL), which allows thorough decompression of the lumbar spinal canal and proximal two foraminal nerve roots by undercutting the lamina and facet joint. Kyphotic prone positioning on elevated curvature of the frame or occasional use of an interlaminar spreader enables sufficient interlaminar working space. Pain was measured with a visual analogue scale (VAS). Surgical outcome was analyzed with the Oswestry Disability Index (ODI). Data were analyzed preoperatively and six months postoperatively. Results : The interlaminar window provided by this technique allowed for unhindered access to the central canal, lateral recess, and upper/lower foraminal zone, with near-total sparing of the facet joint. The VAS scores and ODI were significantly improved at six-month follow-up compared to preoperative levels (p<0.001, respectively). Excellent pain relief (>75% of initial VAS score) of back/buttock and leg was observed in 75.0% and 76.2% of patients, respectively. Conclusion : CDL is easily applied, allows good field visualization and decompression, maintains stability by sparing ligament and bony structures, and shows excellent early surgical results.
턴널링 전류는 전극사이의 거리에 지수적으로 비례한다. 따라서 턴널링 전류의 변화측정을 통하여 전극간격의 미세변위를 측정할 수 있다. 본 실험에서는 micro-tip과 membrane사이에 턴널링 전류가 흐르는 피라미드형 실리콘 턴널링소자를 micro-electro-mechanical systems (MEMS) 공정을 이용하여 제조하였다. 단결정 실리콘을 KOH 용액안에서 이방성 에칭 시켜 micro-tip을 제조하였으며, 이때 $SiO_2$막을 마스크로 사용하였다 $Si_3N_4$막으로 membrane을 형성하였다. 마스크 방향에 따른 에칭 진행과정의 차이를 조사하였으며 membrane으로 사용한 $Si_3N_4$막의 stiffness를 측정하였다. 실험으로 측정하기 어려운 영역의 $Si_3N_4$막 stiffness 예측을 위한 모델식을 제시하였다.
MR arthrography is a useful modality for evaluating the labrocapsular ligamentous complex(LOLC) of the shoulder. This study was performed to describe normal anatomic variations and pitfalis in image interpretation related to evaluation of the LOLC. MR Arthrogram of 56 shoulders in 41 asymptomatic young, active volunteers were prospectively reviewed to evaluate the labral shapes. capsular insertions and images which may mimic the lesions of glenohumoral instability. The anterior and posterior parts of the labra. respectively. varied in shape: triangular$(72\%,\; 36\%)$. round $(13\%,\; 35\%)$. cleaved$(8\%,\; 1\%)$. notched$(2\%,\; 0\%)$. flat$(5\%,\; 24\%)$ and absent$(0\%,\; 4\%)$. The anterior and posterior capsular insertions. respectively. varied in sites: Mosely and Oevergaard type I$(82\%,\;62\%)$, type II$(13\%,\; 3\%)$ and type III $(5\%,\; 2\%)$. A number of pitfalls in image interpretation were discovered. Articular cartilage undercutting the labrum$(29\%)$ and middle glenohumoral ligament in proximity to anterior labrum $(5\%)$ simulated a labral tear. Joint fluid interposed in the central. superior portion of the sublabral sulci$(25\%)$ simulated a SLAP lesion. Synovial fold$(38\%)$ in axillary pouch resembled a loose body. Knowledge of normal variations and pitfalls in MR arthrogram image interpretation of labral capsular - ligamentous complex will help the orthopedist to accurately detect debilitating derangements associated with the glenohumeral instability.
Objectives: To determine the retentive strength and failure mode of undercut composite post, glass fiber post and polyethylene fiber post luted with flowable composite resin and resin-cement. Materials and Methods: Coronal parts of 120 primary canine teeth were sectioned and specimens were treated endodontically. The teeth were randomly divided into 6 groups (n = 20). Prepared root canals received intracanal retainers with a short composite post, undercut composite post, glass fiber post luted with flowable resin or resin-cement, and polyethylene fiber post luted with flowable resin or resin-cement. After crown reconstruction, samples were tested for retentive strength and failure mode. Statistical analysis was done with one-way ANOVA and Tukey tests (p < 0.05). Results: There were statistically significant differences between groups (p = 0.001). Mean bond strength in the undercut group was significantly greater than in the short composite post (p = 0.030), and the glass fiber post (p = 0.001) and the polyethylene fiber post group luted with resin-cement (p = 0.008). However, the differences between the undercut group and the groups with flowable composite as the luting agent were not significant (p = 0.068, p = 0.557). Adhesive failure was more frequent in the fiber post groups. Conclusions: Although the composite post with undercutting showed the greatest resistance to dislodgement, fiber posts cemented with flowable composite resin provided acceptable results in terms of retentive strength and fracture mode.
Yang, Seung Heon;Kim, Chi Heon;Lee, Chang Hyun;Ko, Young San;Won, Youngil;Chung, Chun Kee
Journal of Korean Neurosurgical Society
/
제64권4호
/
pp.575-584
/
2021
Objective : Cervical expansive laminoplasty is an effective surgical method to address multilevel cervical spinal stenosis. During surgery, the spinous processes of C2 and C7 are usually preserved to keep the insertion points of the cervical musculature and nuchal ligament intact. In this regard, dome-like laminectomy (undercutting of C7 lamina) instead of laminoplasty is performed on C7 in selected cases. However, resection of the lamina can weaken the C7 lamina, and stress fractures may occur, but this complication has not been characterized in the literature. The objective of the present study was to investigate the incidence and risk factors for C7 laminar fracture after C7 dome-like laminectomy and its impact on clinical and radiological outcomes. Methods : Patients who underwent cervical open-door laminoplasty combined with C7 dome-like laminectomy (n=123) were classified according to the presence of C7 laminar fracture. Clinical parameters (neck/arm pain score and neck disability index) and radiologic parameters (C2-7 angle, C2-7 sagittal vertical axis, and C7-T1 angle) were compared between the groups preoperatively and at postoperatively at 3, 6, 12, and 24 months. Risk factors for complications were evaluated, and a formula estimating C7 fracture risk was suggested. Results : C7 lamina fracture occurred in 32/123 (26%) patients and occurred at the bilateral isthmus in 29 patients and at the spinolaminar junction in three patients. All fractures appeared on X-ray within 3 months postoperatively, but patients did not present any neurological deterioration. The fracture spontaneously healed in 27/32 (84%) patients at 1 year and in 29/32 (91%) at 2 years. During follow-up, clinical outcomes were not significantly different between the groups. However, patients with C7 fractures showed a more lordotic C2-7 angle and kyphotic C7-T1 angle than patients without C7 fractures. C7 fracture was significantly associated with the extent of bone removal. By incorporating significant factors, the probability of C7 laminar fracture could be assessed with the formula 'Risk score = 1.08 × depth (%) + 1.03 × length (%, of the posterior height of C7 vertebral body)', and a cut-off value of 167.9% demonstrated a sensitivity of 90.3% and a specificity of 65.1% (area under the curve, 0.81). Conclusion : C7 laminar fracture can occur after C7 dome-like laminectomy when a substantial amount of lamina is resected. Although C7 fractures may not cause deleterious clinical outcomes, they can lead to an unharmonized cervical curvature. The chance of C7 fracture should be discussed in the shared decision-making process.
Severe sediment erosion during floods occur disaster and economic losses, but general sediment erosion is basic mechanism to move sediment from upstream to downstream river. In addition, it is important process to change river form. Check dam, which is constructed in mountain stream, play a vital role such as control of sudden debris flow, but it has negative aspects to river ecosystem. Now a day, check dam of open type is an alternative plan to recover river biological diversity and ecosystem through sediment transport while maintaining the function of disaster control. The purpose of this paper is to verify sediment erosion progress of river bottom and bank as first step for river restoration after dam slit by cross-sectional shear stress and critical shear stress. Study area is upstream reach of slit check dam in mountain stream, named Wasada, in Japan. The check dam was slit with two passages in August, 2010. The transects were surveyed for four upstream cross-sections, 7.4 m, 34 m, 86 m, and 150 m distance from dam in October 2010. Sediment size was surveyed at river bottom and bank. Sediment of cobble size was found at the wetted bottom, and small size particles of sand to medium gravel composed river bank. Discharge was $2.5\;m^3/s$ and bottom slope was 0.027 m/m. Excess shear stress (${\tau}_{ex}$) was calculated for hydraulic erosion by subtracting the values of critical shear stress (${\tau}_{c}$) from the value of shear stress (${\tau}$) at river bottom and bank (${\tau}_{ex}=\tau-{\tau}_c$). Shear stress of river bottom (${\tau}_{bottom}$) was calculated using the cross-sectional shear stress, and bank shear stress (${\tau}_{bank}$) was calculated from the method of Flintham and Carling (1988). $${\tau}_{bank}={\tau}^*SF_{bank}((B+P_{bed})/(2^*P_{bank}))$$ where $SF_{bank}=1.77(P_{bed}/p_{bank}+1.5)^{-1.4}$, B is the water surface width, $P_{bed}$ and $P_{bank}$ are wetted parameter of the bed and bank. Estimated values for ${\tau}_{bottom}$ for a flow of $2.5\;m^3/s$ were lower as 25.0 (7.5 m cross-section), 25.7 (34 m), 21.3 (86 m) and 19.8 (150 m), in N/$m^2$, than critical shear stress (${\tau}_c=62.1\;N/m^2$) with cobble of 64 mm. The values were insufficient to erode cobble sediment. In contrast, even if the values of ${\tau}_{bank}$ were lower than the values for ${\tau}_{bottom}$ as 18.7 (7.5 m), 19.3 (34 m), 16.1 (86 m) and 14.7 (150 m), in N/$m^2$, excess shear stresses were calculated at the three cross-sections of 7.5 m, 34 m, and 86 m distances compare with ${\tau}_c$ is 15.5 N/$m^2$ of 16mm gravel. Bank shear stresses were sufficient for erosion of the medium gravel to sand. Therefore there is potential to erode lateral bank than downward erosion in a flow of $2.5\;m^3/s$. Undercutting of the wetted bank can causes bank scour or collapse, therefore this channel has potential to become wider at the same time. This research is about a potential of sediment erosion, and the result could not verify with real data. Therefore it need next step for verification. In addition an erosion mechanism for river restoration is not simple because discharge distribution is variable by snow-melting or rainy season, and a function for disaster control will recover by big precipitation event. Therefore it needs to consider the relationship between continuous discharge change and sediment erosion.
본 논문은 확산펌프 기반의 축전 결합형 $BCl_3$ 플라즈마를 사용하여 GaAs와 AlGaAs를 건식 식각한 연구에 관한 것이다. 실험에서 사용한 압력 범위는 $50{\sim}180$ mTorr, CCP 파워는 $50{\sim}200\;W$, $BCl_3$ 가스 유량은 $2.5{\sim}10$ sccm 이었다. 식각 후에 GaAs와 AlGaAs의 식각 속도와 표면 거칠기분석은 표면 단차 측정기를 이용하여 하였다. GaAs의 식각 벽면과 표면 상태는 전자현미경으로 분석하였다. 식각 중 플라즈마의 광 특성 분석은 광학 발광 분석기를 이용하였다. 본 실험을 통하여 5 sccm의 소량의 $BCl_3$ 가스 유량으로 공정 압력이 130 mTorr이내인 경우에는, 100 W CCP 파워의 조건에서 GaAs는 약 $0.25{\mu}m$/min 이상의 우수한 식각 속도를 얻을 수 있었다. AlGaAs의 경우는 GaAs의 식각 속도보다 조금 낮았다. 그러나 같은 유량에서 공정압력이 180 mTorr로 높아지면 GaAs와 AlGaAs의 식각 속도가 급격히 감소하여 거의 식각되지 않는 것을 알 수 있었다. 또한 CCP 파워의 경우에는 50 W의 파워에서는 GaAs와 AlGaAs 모두 거의 식각되지 않았다. 그러나 $100{\sim}200\;W$의 조건에서는 $0.3{\mu}m$/min 이상의 높은 식각 속도를 주었다. 두 결과를 보았을 때 축전결합형 $BCl_3$ 플라즈마 식각에서 GaAs와 AlGaAs의 식각 속도는 CCP 파워가 $100{\sim}200\;W$ 범위에 있으면 그 값에 비례하지 않고 거의 일정한 값이 된다는 사실을 알았다. 75mTorr, 100 W의 CCP 파워 조건에서 $BCl_3$의 유량 변화에 따른 GaAs와 AlGaAs의 식각 속도의 경우, $BCl_3$의 유량이 2.5 sccm의 소량일 때는 GaAs는 식각 속도가 높았지만 AlGaAs는 거의 식각되지 않는 흥미로운 결과를 얻었다. 플라즈마 발광 특성을 보면 $BCl_3$ 축전 결합 플라즈마는 주로 $500{\sim}700\;mm$ 범위를 가지는 넓은 분자 피크만 만든다는 것을 알 수 있었다. 전자 현미경 사진 결과에서는 5 sccm과 10 sccm의 $BCl_3$ 플라즈마 모두 식각 중에 GaAs의 벽면을 언더컷팅 하였으며, 10 sccm의 $BCl_3$유량을 사용하였을 때 언더컷팅이 더 심했다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.